ABS Actuator Recall – 2017 Infiniti QX60

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 18V601
Manufacturer Nissan North America, Inc.
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 215,124

 

Brake Fluid may Leak into ABS Pump and Ignite

A brake fluid leak on the circuit board may result in an electrical short, increasing the risk of a fire.

 

Summary

Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 Nissan Murano, 2016-2017 Nissan Maxima, 2017-2018 Nissan Pathfinder, and 2017 Infiniti QX60 vehicles. The Anti-Lock Brake (ABS) actuator pumps may allow brake fluid to leak onto an internal circuit board.

 

Remedy

Nissan will notify owners, and dealers will inspect the serial number on the ABS actuator, replacing it as necessary, free of charge. The recall is expected to begin October 15, 2018. Owners may contact Nissan customer service at 1-800-867-7669. Note: When brake fluid has leaked onto the circuit board, the ABS warning lamp will remain illuminated for more than 10 seconds after engine start up. If this occurs, owners are advised to park the vehicle outdoors away from other vehicles or structures and to not drive the vehicle.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Infinity has a Recall

 


SAFETY RECALL

 

CAMPAIGN BULLETIN

ABS Actuator Recall
Preliminary Dealer Announcement

 

Reference: ABS
Date: September 11, 2018

 

Attention: Retailer Principal, Sales, Parts and Service Managers

 

***** Campaign Summary *****

INFINITI is committed to the safety and security of our clients and their passengers. INFINITI has notified the National Highway Traffic Safety Administration (NHTSA) that it will conduct a Voluntary Recall Campaign on ~16,000 specific MY2017 QX60 vehicles to inspect and, if necessary replace the Antilock Braking System (ABS) actuator.

The ABS actuator pump seal may leak brake fluid onto the control electronic circuit board. If this occurs, an ABS warning lamp will illuminate to warn the driver. If the vehicle continues to be operated in this condition, the brake fluid leak may create an electrical short in the actuator circuit, which in rare cases could potentially lead to a thermal incident. If the ABS warning lamp is continually illuminated, INFINITI recommends parking the vehicle outside and contacting INFINITI Roadside Assistance to have the vehicle towed to an authorized INFINITI service department as soon as possible.

Owners of potentially affected vehicles will be notified beginning in October 2018 and asked to bring their vehicle to an authorized INFINITI retailer to have the remedy work completed at no cost for parts or labor.

INFINITI expects to issue an updated retailer notification with remedy instructions and campaign IDs to identify affected vehicles by September 19, 2018.

 

***** What Retailers Should Do****

  1. Please wait until INFNITI issues further instructions and identifies affected vehicles in Service Comm and DBS National Service History – Open Campaigns.
  1. Retailers should quarantine parts inventory of the following part numbers and return them immediately to their PDC using an I-code.

These parts are obsolete and restricted from further ordering or use. INFINITI requests all retailer parts inventory be returned no later than September 30, 2018.

  • 47660-9UC1B
  • 47660-9UC1D

Frequently Asked Questions (FAQ): 

Q. When will retailers have additional information on this issue?
A. INFINITI expects to issue additional instructions on September 19, 2018.
Q. What vehicles are affected?
A. INFINITI will provide campaign IDs to identify affected MY2017 QX60 vehicles in Service Comm and DBS National Service History Open Campaigns by no later than September 19, 2018.
Q. What should I tell inquiring clients?
A. Inform owners that INFINITI will notify them by mail in October 2018 if their vehicle is affected and instruct them to contact an authorized INFINITI retailer to inspect their vehicle.

Ask MY2017 QX60 owners if the ABS warning lamp is illuminated:

  • If yes:
  1. Arrange with INFINITI Roadside Assistance (1-800-662-6200 option 1) to tow the vehicle to a retailer.
  2. Park the vehicle outside and away from structures.
  3. Retrieve any diagnostic trouble codes from the ABS control unit and keep the results with a repair order for this vehicle.
  4. Disconnect the 12-volt battery while awaiting further instructions to determine if the vehicle is subject to this recall.
  • If no:
  1. Clients may drive their vehicle at their discretion, but INFINITI urges owners to contact INFINITI Roadside Assistance if the ABS warning lamp illuminates and bring their vehicle to an INFINITI retailer as soon as possible to have their ABS actuator inspected if they receive a notification letter.
Q. Are you experiencing this condition on any other Nissan (or INFINITI) models?
A. Yes, ~199,000 specific MY2016-2017 Nissan Maxima, MY2015-2017 Nissan Murano, and MY2017 Nissan Pathfinder vehicles were included in Nissan’s notification to NHTSA. INFINITI retailers received a similar preliminary announcement informing them more information will be provided on September 19, 2018.

 


ABS Actuator Recall
Preliminary Retailer Announcement

September 11, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCMN-18V601-4592.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [198.16 KB]

 


DEFECT INFORMATION REPORT

September 7, 2018

https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V601-9252.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [93.69 KB]

 


DEFECT INFORMATION REPORT AMENDMENT

September 18, 2018

https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V601-7121.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [66.50 KB]

 


Recall Acknowledgement

September 19, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V601-4638.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [242.11 KB]

 


 

Bestseller No. 1
Prestone AS401 DOT 3 Synthetic Brake Fluid - 32 oz.
  • Provides an extra margin of safety in extreme braking conditions
  • Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
  • Excellent for ABS, disc and drum brake systems
  • Delivers braking power when needed by avoiding a spongy pedal
  • Both wet and dry boiling points exceed the minimum government standards
Bestseller No. 2
LUCAS OIL 10826 Brake Fluid - 1 Quart
  • High quality blend of polyethylene glycol ethers and additives
  • Compatible with all brake system rubber components and other brake fluids
  • Prevents seal hardening or softening
  • Protects against rust and corrosion
  • Provides excellent lubricity
Bestseller No. 3
BOSCH ESI6-32N Brake Fluid (Direct Replacement for DOT 3, DOT 4, and DOT 5.1) - 1 Quart
  • High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
  • Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5. 1
  • Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
  • Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
  • Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
SaleBestseller No. 4
Johnsen's 5034 Premium Synthetic DOT-4 Brake Fluid - 1 Gallon
  • Synthetic quality brake fluid
  • Contains special ingredients to guard against vapor lock and moisture absorption
  • Exceeds requirements for both DOT 3 and DOT 4 brake fluids
  • Specially formulated for DOT 4 brake fluid applications
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 5
Johnsen's 2234 Premium DOT-3 Brake Fluid - 1 Gallon
  • Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
  • Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
  • Mixes with all DOT 3 approved brake fluids
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 6
Quicksilver 8M0128415 DOT 4 Brake Fluid – 12 Ounce
  • The 336⁰F wet boil point and 521⁰F dry boil point exceeds common characteristics for DOT 4 brake fluids
  • Provides corrosion protection in brake components
  • Matches needs of all DOT 4 manufacturer recommendations
  • Compatible with all DOT 3 and DOT 4 applications
Bestseller No. 7
ACDelco GM Original Equipment 10-4110 DOT 3 Hydraulic Brake Fluid - 16 oz
  • Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
  • High boiling point to minimize brake fluid boiling and vapor lock
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
SaleBestseller No. 8
Liqui Moly BRAKE FLUID DOT 4 1LTR
  • Premium oil imported from Germany
Bestseller No. 9
ATE Original TYP 200 Racing Quality DOT 4 Brake Fluid, 1 Liter Can
  • Minimal decrease of boiling point due to excellent water locking properties
  • Non-foaming when filling and bleeding the brake system
  • Excellent corrosion protection due to selected additives
  • High safety tolerance against steam bubbles
  • Makes brake fluid changing intervals of up to 3 years possible
Bestseller No. 10
Wagner DOT 3 21B Brake Fluid, 32 oz; 946 ml
  • Maintains proper movement for safe, effective stopping performance
  • Helps deliver a quieter braking system
  • Produces smoother pedal travel
  • Provides longer brake life and performance
  • Install Wagner with total confidence

Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

1
Share to...