PC669 – Fuel Feed Hose Retainer – 2019 Nissan Altima

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 18V922
Manufacturer Nissan North America, Inc.
Components FUEL SYSTEM, GASOLINE
Potential Number of Units Affected 23,903

 

Fuel Tube may Leak or Disconnect

If the retainer clip is unlocked, the fuel tube may shift and cause a fuel leak, increasing the risk of a fire. If the fuel tube fully disconnects, the engine can stall, increasing the risk of a crash.

 

Summary

Nissan North America, Inc (Nissan) is recalling certain 2019 Altima vehicles. The retainer clip connecting the low pressure fuel tube to the high pressure fuel pump may not have been locked into position.

 

Remedy

Nissan has notified owners, and dealers will route the fuel hose into the holding clip and lock the retainer clip into place, as necessary, free of charge. The recall began February 11, 2019. Owners may contact Nissan customer service at 1-800-867-7669.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov

 

Check if your Nissan has a Recall

 


CAMPAIGN BULLETIN

SAFETY RECALL

 

Fuel Feed Hose Retainer
Dealer Inventory               

Reference: PC669
Date: December 21, 2018

 

 Attention: Dealer Principal, Sales, Service & Parts Managers 

Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM
Activation date:
Stop Sale  In Effect
MY2019 Altima (L34) 23,903 3,156 December 21, 2018 YES

 

*~ 9,238 vehicles were repaired under the Quality Action (PC669) announced on November 21, 2018. 

 

***** Campaign Summary *****

Nissan is escalating a previously announced new vehicle quality action and issuing a Voluntary Safety Recall to require dealers to inspect the Fuel Feed Hose Retainers and, if necessary, lock the retainer in the proper lock position on ~23,903 specific 2019 Altima vehicles identified in Service Comm.

Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer.  Dealers must complete this inspection and if necessary, repair, prior to sale.  The inspection and, if necessary, repair; will take approximately fifteen (15) minutes to complete and no parts are required.

 

***** What Dealers Should Do**** 

  1. Verify if vehicles are affected by this Voluntary Safety Recall Campaign using Service Comm or DBS National Service History Campaign I.D. PC669.
    • New vehicles in dealer inventory can be also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign).
    • Refer to NPSB 15-460 for additional information 
  1. Dealers must not sell, lease, trade, rent or loan any vehicles in dealer inventory affected by this recall campaign until after the vehicle has been repaired.
  1. Dealers should use NTB18-088 to correct any vehicles subject to this campaign.
  1. Once repaired, dealers should submit the claim using the claims coding provided, and release the vehicle.

 

***** Release Schedule *****

Parts
  • No parts are required for this campaign
Repair
  • NTB18-088
Owner
Notification 
Nissan will begin notifying owners of all potentially affected vehicles in February 2019 via U.S. Mail.   

 

***** Dealer Responsibility *****

It is the dealer’s responsibility to check Service Comm or DBS National Service History using the appropriate Campaign I.D. for the campaign status on each vehicle falling within the range of this voluntary safety recall campaign which for any reason enters the service department.  This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in dealer inventory.  If a VIN subject to this recall campaign was part of a dealer trade, the letter associated with that VIN should be forwarded to the appropriate dealer for service completion.

 

NISSAN NORTH AMERICA, INC.

Aftersales DIVISION

 

Frequently Asked Questions (FAQ):

 

Q. Is this a safety recall?
A. Yes, a Stop Sale is in effect.

 

Q. What is the reason for recall?
A. Due to an assembly issue at the plant, which has since been corrected, the fuel feed hose retainer may not be placed in the fully locked position. If the fuel feed hose retainer is not properly locked into position, a fuel leak could occur which may result in fuel odor or, in rare circumstances, in an engine stall condition.

 

Q. What is the possible effect of the condition?
A. If the fuel feed hose retainer is not properly locked into position, a fuel leak could occur, which may result in fuel odor or, in rare circumstances, an engine stall condition.

 

Q. What will be the corrective action for this voluntary recall campaign?
A. Nissan dealers will inspect the low-pressure fuel feed hose retainer lock and fuel hose-holding clip and, if necessary, properly route the fuel hose into the holding clip and lock the red retainer into place.

 

Q. How long will the corrective action take?
A. This service, which is conducted at no charge to you for parts and labor, should take less than one (1) hour to complete.

 

Q. When will vehicle owners be notified?
A. Nissan will begin notifying owners of all potentially affected vehicles in February, 2019 via U.S. Mail.

 

Q. Are parts readily available?
A. No parts are required.

 

Q. Is my vehicle safe to drive?
A. Nissan strongly encourages affected customers to have their vehicle inspected at their earliest convenience. No parts are required for this campaign and the inspection and, if necessary repair, can be completed quickly.

 

Q. Will a rental vehicle be provided while the dealer is servicing the vehicle?
A. No. Parts are not required for this campaign and the inspection (and if necessary repair) will take less than one (1) hour.

 

Q. I have lost confidence in the vehicle. Will Nissan replace or repurchase the vehicle?
A. No. The remedy will fully correct this condition.

 

Q. Is there anything owners can do to mitigate the condition?
A. No. If you receive a recall notification letter, please schedule an appointment with your Nissan dealer to have the vehicle inspected as soon as possible.

 

Q. Is there any charge for the repair?
A. No, the remedy will be performed for the customer free of charge.

 

Q. Will I have to take my vehicle back to the selling dealer to have the service performed?
A. No, any authorized Nissan dealer is able to perform the voluntary safety recall campaign.

For Consumer Affairs: Please inform us of the dealer where you would like to have the corrective action completed.

 

Q. How many vehicles are involved in the campaign?
A. Approximately 23,903 vehicles are potentially affected. 

Make/Model Dates of Manufacture
MY2019 Altima (L34) May 25, 2018 through October 30, 2018

 

 

Q. Are you experiencing this condition on any other Nissan (or INFINITI) models?
A. No.

 

 

Revision History: 

Date Announcement Purpose
December 21, 2018 Original Launch Recall; supersedes Quality Action PC669 launched November 21, 2018

 


NHTSA RECALL 18V-922

 

OWNER NOTIFICATION
NOTIFICACIÓN PROPRIETARIO

 

Dear Nissan Altima owner:

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.

Nissan has decided that a defect which relates to motor vehicle safety, exists in certain Model Year 2019 Nissan Altima vehicles.  Our records indicate you own or lease a Nissan vehicle subject to this recall as identified by the Vehicle Identification Number (VIN) on the inside of this notice.

 

Reason for Recall

On some of the affected vehicles, the low pressure fuel tube retainer clip may not have been locked into position during installation.  As a result, a fuel leak may occur. If the fuel leak continues, the check engine light will illuminate to warn the driver.  However, if the fuel tube disconnects completely, the fuel leak may increase and potentially cause the engine to stop running unexpectedly.

 

What Nissan Will Do

Your Nissan dealer will inspect, and secure if necessary, both the low pressure fuel tube retainer clip and fuel hose holding clip.  This repair will be made free of charge and should take less than an hour to complete.  However, your dealer may require your vehicle for a longer period of time based upon their work schedule.

 

What You Should Do
Qué Debes Hacer

Contact any Nissan dealer at your earliest convenience to have your vehicle remedied.  Please bring this notice with you to your service appointment.

Para reparar tu vehículo, comunícate con cualquier concesionario Nissan a la mayor brevedad. Se requiere que traigas esta notificación el día de tu cita.

If the dealer fails to, or is unable to make the necessary repairs free of charge, you may contact the National Consumer Affairs Department, Nissan North America, Inc. P.O. Box 685003, Franklin, TN 37068-5003. The toll free number is 1-800-NISSAN1 (1-800-647-7261).

Si el concesionario no cumple, o no le es posible realizar las reparaciones necesarias sin cargos, puedes contactar al Departamento Nacional de Asuntos del Consumidor a: National Consumer Affairs Department, Nissan North America, Inc. P.O. Box 685003, Franklin, TN 37068-5003. El número libre de cargos es 1-800-NISSAN1 (1-800-647-7261).

You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.   Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.

Thank you for your cooperation.  We appreciate your Nissan ownership and apologize for any inconvenience this may cause you.

 

Gracias por tu cooperación. Agradecemos tu patrocinio como dueño de un Nissan y te ofrecemos nuestras disculpas por cualquier inconveniente que esto pueda ocasionar.


Reference: PC669
Date: December 21, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCMN-18V922-1367.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [540.97 KB]

 


Owner Notification Letter

https://static.nhtsa.gov/odi/rcl/2018/RCONL-18V922-4347.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [163.36 KB]

 


DEFECT INFORMATION REPORT

December 20, 2018

https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V922-4923.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [415.34 KB]

 


Recall Acknowledgement

February 22, 2019

https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V922-2292.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.13 KB]

 


Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V922&docType=RCL


 

Bestseller No. 1
CRC GDI IVD Intake Valve & Turbo Cleaner
  • Proven to clean intake valves on GDI engines and turbo systems
  • Easily installed through the air intake system
  • Highest concentration PEA (Polyether Amine) detergency available
  • Proven to remove up to 46% of GDI Intake Valve deposits in 1 hour
  • 150X more concentrated than fuel additives
Bestseller No. 2
Gumout 540028 Foaming Intake Valve & Turbo Cleaner, 11 oz
  • Deep Cleans GDI (Gasoline Direct Injection) / PFI (Port Fuel Injection) Intake Valves, As Well As, The Throttle Body, Intake Ports, Fuel Injectors and Combustion Chambers
  • Helps Restore Fuel Economy and Maximize Horse Power
  • Removing Carbon and Fuel Deposits From Gasoline Engines Intake Valves, Intake Ports and Turbos Is Essential to Ensuring Optimal Vehicle Performance.
  • Made with Carbon Clear and Trade, the Most Advanced P.E.A. Cleaning Agent Available
  • Strong Enough to Cut Through Thick Carbon Deposits, Even at Extreme Engine Temperatures
Bestseller No. 3
Bestseller No. 4
Bestseller No. 5
Bestseller No. 6
Berryman Products 2611 Intake Valve and Combustion Chamber Cleaner, 16-Ounce Aerosol
  • Formulated for Use In All Fuel-Injected Gasoline Engines, Including GDI
  • Contains Polyetheramine (“PEA”) to Dissolve Carbon Buildup in Combustion Chambers
  • Cleans ALL Types of Intake Valves, Including Those Found in PFI, TBI, and GDI Engines
  • Safe On Catalytic Converters and Oxygen Sensors
  • Not For Use In Diesel Engines
Bestseller No. 7
FIRSTINFO A1601 4 In 1 Intake Valve Cleaner Combustion Chamber Cleaner/Vacuum System Cleaner/Vacuum System Pressure Tester Kit
  • 【 Maintain Engine Performance 】 Perfect for air intake system, combustion chamber, EGR Valves, intake valves and oxygen sensors. Easy operation for making the fuel injectors spray smoothly and properly.
  • 【 Easy to Use 】 Simply fill with air intake cleaning liquids and connect the vacuum hose of vehicle vacuum system. Reduce carbon deposits easily.
  • 【 Multiple Applications 】 Use to clean the intake valve, combustion chamber, vacuum system and test the vacuum system pressure. Provides more thorough cleaning than other methods. Effectively remove engine carbon deposits and increase gas mileage performance.
  • 【 Equipped with Negative Pressure Gauge 】 The liquid-filled gauge for accurate vacuum pressure reading and monitoring chemical flow.
  • 【 Gasoline Engine / Petrol Cars Use 】 Used for gasoline engine injection and petrol cars. "NOT" for diesel injector. And solution liquid is "NOT" included.
Bestseller No. 8
CRC Industries, Inc. Intake Valve Cleaner (11 oz) Bundled with Latex Gloves (3 Items)
  • Bundle comes with:
  • 2 - CRC 05319 Industries Intake Valve Cleaner (11 oz)
  • 2 Pairs (4 Gloves) of CLC2316L Latex Gloves - Large
  • Fit type: Universal
Bestseller No. 9
Smilyeez BG GDI Air Intake & Valve Cleaner PN 260 With Pocket Screwdriver (1)
  • Restores MPG
  • Restores engine performance
  • Restores power
  • Reduces harmful emissions
  • Requires pressurized tool
SaleBestseller No. 10
ATP AT-100 Intake Blast Complete Intake System Cleaner, 7.5 oz, 1 Pack
  • Cleans intake system by dissolving carbon and oil deposits
  • Helps eliminate rough idle, hard starting, loss of power and pinging
  • Smoke free, catalytic converter and O2 sensor safe formula
  • Recommended for fuel injected engines, critical for direct injected engines
  • Easy to use aerosol application, Includes vacuum Hose and multi-adapter fitting

Last update on 2024-04-03 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...