CAM BOLTS FOR FRONT WHEEL ALIGNMENT – 2005-2009 Nissan Titan & Armada

NTB05-097b
January 12, 2009

 

2005-2009 TITAN AND ARMADA;  CAM BOLTS FOR FRONT WHEEL ALIGNMENT

 

This bulletin has been amended. The Applied Vehicles model year range has been expanded.  Please discard all previous copies of this bulletin.

APPLIED VEHICLES:	2005 – 2009 Titan (A60) 2005 – 2009 Armada (TA60)
APPLIED VINS	2005 Titan built after 1N6AA0(***)5N 566358 2005 Armada built after 5N1AA08(**)5N 733885 2006 – 2009 vehicles: All VINs
APPLIED DATE	Vehicles built after June 2, 2005

 

 

IF YOU CONFIRM

An Applied Vehicle needs to have the front wheel alignment adjusted,

 

NOTE: Applied Vehicles listed above come from the factory with non-adjustable bolts  (Not Cam Bolts) for the lower link (lower control arm) mounting.

 

ACTIONS

1. Remove the original lower link mounting bolts (cam bolts) and washers – 2 per side.
   • Refer to section FSU in the Electronic Service Manual (ESM) for lower link mounting bolt locations.
2. Install the new bolts (cam bolts) and cam washers listed in the Parts Information section of this bulletin.
   • Reuse the nuts you removed from the old bolts. 

NOTE: Cam bolts are used to adjust caster and camber.

3. Perform front wheel alignment adjustment per the ESM.

  

PARTS INFORMATION

DESCRIPTION	PART #	QUANTITY
Cam Bolt	54580-7S005	4
Cam Washer (Eccentric)	54559-7S005	4

 

CLAIMS INFORMATION

Submit a Primary Failed Part (PP) line claim using the following claims coding: 

DESCRIPTION	PFP	OP CODE	SYM	DIA	FRT
Install Cam Bolts	(1)	MX09AA	(2)	44	0.5

 

1. Reference the Parts Information Table and use the Cam Bolt P/N as the PFP.
2. Reference the current Nissan Warranty Flat Rate Manual and use the symptom code that best matches the vehicle incident.

NOTE: This repair can only be used in conjunction with a claim for Front Wheel Alignment (Op-Code WD44AA) and must be submitted on a separate work order line.