Voluntary Recall Campaign 2018-2019 Nissan Versa Note; AV Control Unit (Infotainment) Software Update

 

Classification: Reference: Date:
EL19-034aNTB19-095aNovember 22, 2019

 

VOLUNTARY RECALL CAMPAIGN 

2018 – 2019 VERSA NOTE; AV CONTROL UNIT (INFOTAINMENT) SOFTWARE UPDATE

 

This bulletin has been amended. See AMENDMENT HISTORY on the last page.  Please discard previous versions of this bulletin.

 

CAMPAIGN ID #:R1911
NHTSA #:19V654
APPLIED VEHICLES:2018 – 2019 Versa Note (E12)

 

Check Service COMM or Dealer Business Systems (DBS)  National Service History to confirm campaign eligibility.

 

INTRODUCTION

Nissan is conducting this voluntary recall campaign on certain specific model year 2018 – 2019 Versa Note vehicles to reprogram the Audio/AV Control Unit. This service will be performed at no charge to the customer for parts or labor.

 

IDENTIFICATION NUMBER

Nissan has assigned identification number R1911 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign.

 

DEALER RESPONSIBILITY

It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory.  Federal law requires that new vehicles in dealer inventory which are the subject of a recall must be corrected prior to sale. Failure to

do so can result in civil penalties by the National Highway Traffic Safety Administration.  While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.

 

REQUIRED SPECIAL TOOL 

 

  • Special tool USB drives have been shipped to each dealer: J-52812-1, J-52812-7, J-52812-8, and J52812-11.

 

 

IMPORTANT:

It is highly recommended that the provided campaign USB drives J-52812-1, J-52812-7,  J-52812-8, and J52812-11 be used.

 

HINT:

  • If unavailable, the reprogramming software may be downloaded onto special tool USB drive J-52727-1 using the Infotainment Software Download procedure.

 

  • Special tool USB drive J-52727-1 has also been shipped to each dealer.

 

  • Click here to access the Infotainment Software Download procedure. After the software has been downloaded, continue to step 1 in this bulletin.

 

SERVICE PROCEDURE

 

  1. Determine which audio unit the vehicle is equipped with.

 

  • If there is a Phone button as shown in Figure 1, then continue to step 2 on the next page.

 

  • If there is a Back button as shown in Figure 2, then skip to step 15 on page 7.

 

  • If there is a NAV MAP button as shown in Figure 3, then skip to step 23 on page 11.

 

Update AV Control Unit

 

HINT: This will require two (2) USB drives.

 

  1. Turn ON the hazard warning lamps to prevent the BCM from going into battery saver mode.

 

  1. Turn ON the ignition.

 

  1. Turn ON the audio.

 

  1. Write down the radio settings.

 

  1. Turn OFF the audio.

 

  1. Insert the special tool USB drive J-52812-7 into the USB media port.

 

HINT: Charging ports are marked in the vehicle with a “lightning bolt” symbol.

 

Do not insert the USB drive into a charging port. If used, the update software and/or USB drive may become damaged. Only insert the USB drive in a USB media port.

 

  1. Select Yes to begin the reprogramming process.

 

HINT:

  • Reprogramming will take about 4-5 minutes.

 

  • Wait until the audio unit reboots before moving to the next step.

 

  1. Remove the USB drive.

 

  1. Insert the special tool USB drive J-52812-8 into the USB media port.

 

  1. Select Yes to continue the reprogramming process.

 

HINT:

  • Reprogramming will take about 4-5 minutes.

 

  • Wait until the audio unit reboots before moving to the next step.

 

  1. Remove the USB drive from the USB port.

 

  1. Perform audio unit initialization.

 

a. Press and hold the “Menu” button.

b. Press and hold the “Audio” button.

c. Press the “Seek right” button 3 times.

 

HINT: A screen similar to the one in Figure 10 will appear.

d.   Select the next button at the bottom right side of the screen.         

e. On the second page of the menu screen, press Factory Cold Start (screen not shown).

f. Select Yes on the confirmation screen shown in Figure 11.

 

NOTE: Initialization is complete after the audio unit reboots.

 

  1. Skip to step 41 on page 16.

 

The repair is complete. Refer to the CLAIMS INFORMATION on page 17.

 

Update AV Control Unit

 

  1. Set the parking brake.

 

  1. Start the engine, and then wait 60 seconds for the system to load.

 

HINT: The engine needs to idle for the duration of the update to retain battery charge.

 

  1. Insert the special USB drive J-52812-1 into the vehicle’s USB media port. (see Figure 13).

 

  • Do not remove the USB drive during the update to the vehicle until instructed to.

 

HINT: Charging ports are marked in the vehicle with a “lightning bolt” symbol.

 

Do not insert the USB drive into a charging port. If used, the update software and/or USB drive may become damaged. Only insert the USB drive in a USB media port.

 

  1. Wait approximately 10-30 seconds for the screen in Figure 15 to appear.

 

  • The screen in Figure 16 may briefly appear. Do not remove the USB. The audio system will detect the USB and continue the update.

 

  1. Wait for the update to complete.

 

  • Follow the on-screen instructions while waiting.

 

HINT: The update lasts 15-25 minutes.

 

  1. Once the update is complete (Figure 18), remove the USB drive; the system will reboot (restart).

 

IMPORTANT: The system will not reboot until the USB drive is removed.

 

  1. Allow the reboot to complete (approximately 30 seconds).

 

  • The Nissan logo will be displayed during the reboot.

 

 

  1. Turn the ignition OFF.

 

The repair is complete. Refer to the CLAIMS INFORMATION on page 17.

 

 

Update AV Control Unit

 

  1. Connect a battery maintainer or smart charger, set to reflash mode or a similar setting.

 

NOTE: This reprogram will take approximately 60 minutes after the Update button has been selected.

 

  1. Set the parking brake.

 

  1. Turn the ignition ON (engine OFF).

 

  1. Turn ON the hazard warning lights to prevent the BCM from going into battery saver mode.

 

NOTE: If at any time during this procedure the status message “Update Failed !” is displayed with the direction to “Insert update media” while a countdown from 60 is displayed or the audio unit continuously reboots (restarts), insert the USB drive, and proceed to step 36. It may take 3-5 minutes for the system to recognize the USB drive.

 

  1. Write down the audio settings.

 

  1. Turn the audio system OFF.

 

  1. Access the SERVICE MENU.

 

  • Press and hold down the APPS or MENU button and at the same time rotate the TUNE-SCROLL knob more than three clicks counter-clockwise and then more than three clicks clockwise (back and forth) until SERVICE MENU displays.

 

NOTE: The audio system must be OFF in order to access the SERVICE MENU.

 

  1. Select Version.

 

  1. Select Update System Software.

 

  1. Insert the special tool USB drive J-52812-11 into the USB media port.

 

HINT: Charging ports are marked in the vehicle with a “lightning bolt” symbol.

 

Do not insert the USB drive into a charging port. If used, the update software and/or USB drive may become damaged. Only insert the USB drive in a USB media port.

 

  1. Select OK.

 

  1. Wait for the APPLICATION screen to appear (Figure 26).

 

  1. Select Update.

 

HINT: After selecting Update, the screen will go black for up to 1 minute. This is a normal part of the update.

 

  1. Wait until the update is complete (this can take up to 60 minutes).

 

  • The screen in Figure 27 will be displayed during the update.

 

  • Figure 28 may display before the update begins. DO NOT remove the USB drive during the update.

 

IMPORTANT: If directed to skip to step 36 due to screen message “Insert update Media”, it may take 3-5 minutes before the USB drive is recognized and for the update to begin.

 

  1. When Figure 29 is displayed, remove the USB drive to complete the update.

 

  • This will cause the system to restart and may take up to 1 minute.

 

  • If the message “No SD card is inserted. Please use a Nissan SD card only” is displayed (Figure 30) proceed to step 38.

 

  • If the APPLICATION screen is displayed (Figure 31), skip to step 39.

 

  • If neither screen is displayed, the update is complete. Skip to step 40 on page 16.

 

   NOTE: Do not turn the ignition OFF.

 

  1. Remove and reinsert the map SD card from the card slot.

 

  • After the map SD card is reinserted, the “APPLICATION” will display (Figure 31).

 

  1. Select Update.

 

  • The update will take about 1 minute to complete and will display Figure 32.

 

  • The message “Download successful. System will reboot now” will display and the audio unit will reboot (Figure 33).

 

  • After the system reboots, the update is complete.

 

  1. Remove J-52812-11 from the USB media port.

 

  1. Turn OFF the hazard warning lights.

 

  1. Restore the radio presets.

 

IMPORTANT: Instruct the customer to go into their Bluetooth phone settings and perform the steps below.

 

  • Delete/erase the car from their phone’s Bluetooth® menu for the current pairing of their phone and vehicle.

 

  • Then re-pair the phone.

 

  • If this is not done, the phone may no longer connect with the vehicle.

 

CLAIMS INFORMATION

Submit a “CM” line claim using the following claims coding:

CAMPAIGN (“CM”) ID MODEL DESCRIPTION OP CODE FRT
R19112018 Versa NoteReprogram AV Control Unit WITHOUT navigationR191100.2 hrs.
Reprogram AV Control Unit WITH navigationR191110.3 hrs.
2019 Versa NoteReprogram Audio/AV Control UnitR191100.2 hrs.

 

AMENDMENT HISTORY

PUBLISHED DATE REFERENCEDESCRIPTION
October 29, 2019NTB19-095Original bulletin published
November 22, 2019NTB19-095aCLAIMS INFORMATION section revised

 


Remedy Instructions and TSB

RCRIT-19V654-9426.pdf 2849.923KB

 


Remedy Instructions and TSB

RCRIT-19V654-0531.pdf 2849.683KB

 


 

Nissan Navigation Updates

navigation system map updates and related products for your Nissan vehicle

 

Bestseller No. 1
9HT0B NISSAN Connect SD Card, Navigation GPS MAP Data, NAVTEQ,North America US Canada 2018 Update, 25920-9HT0B,fits 14thru 18 Rogue Juke Altima SENTRA Xterra Frontier and 2015 NV200
  • Genuine OEM Nissan Map Data SD Memory Card
  • Manufacturer Part Numbers: 25920-9HM0A, 25920-9HM0B, 25920-9HS0A, 5920-9HT0A
  • Is A Direct Fit For The Following: 9403-06-8419
  • Nissan Juke 2016-2017 Nissan Rogue Sport 2017-2018 Nissan Versa Note 2015-2017 Nissan Versa 2015-2017 Nissan NV1500 2015-2018
  • Nissan NV2500 2015-2018 Nissan NV3500 2015-2018 Nissan Titan XD 2016-2018 Nissan Titan 2017-2018
Bestseller No. 4
Android 15 Car Radio Stereo for Nissan Altima 2013-2018, 4GB+128GB
  • ✅【Car Radio for 2013-2018 Nissan Altima】Easy to install and use radio dash kit is perfect fits your Nissan Altima 2013 2014 2015 2016 2017 2018 year car model. The package includes Altima radio unit, power cable, free HD 1080P backup camera, external microphone, GPS antenna etc ( If your car has a left and right rearview and 360° panoramic image, the car stereo is not compatible.)
  • ✅【Wireless Carplay and Android Auto】This Altima Upgrade Replacement is compatible with wireless/wire apple CarPlay and Android Auto, you can make calls hands-free with the help of Siri or Goo-gle assistance, easy to get phone contacts, emails, notifications, map navigation, music, videos and more
  • ✅【GPS Navigation & WIFI】The GPS Navigation Head Unit built-in GPS module and external GPS antenna for online or offline map navigation. Offline map data preloaded, ready to use after installation,includes voice and visual turn-by- directions 11 million+ POI library, 2D & 3D routes, fuel tracker. this car radio also supports WIFI Hot-spot connection
  • ✅【Android 15 System and 4GB+128GB】Our Android 15.0 car audio receivers with 9 inch IPS Touch Screen built-in 4G RAM + 128G ROM system, ensures smooth operation and faster response. WiFI, Network, On-line surfing Available. After connected to WiFi or personal Hotspot, this Car Stereo allows you install android Apps from Application Store.
  • ✅【Bluetooth Function& Steering Wheel Control】This Bluetooth5.2 radio supports answering/ making Bluetooth phone calls with hands-free. The built-in microphone picks up your voice and your car speaker can help you hear the person on the other side clearly. Use the steering wheel buttons to control the car audio, which is more convenient for operation and safer for driving
Bestseller No. 5
TTCR-II Screen Protector 8-Inch for Nissan Altima 2.5 SR 2019-2025
  • Compatible Vehicles of Screen Protector: It is compatible with Nissan Altima 2.5 Platinum/SL/SV 2019-2022, 2.5 SR 2019-2025. For Rogue S/SV 2021-2025 2026 and Rogue Rock Creek 2026. Also For Sentra SR/SV 2020-2025 2026, which comes with 8-inch touchscreen (Not For Rogue Sport and Rogue Platinum/SL).
  • Advanced Screen Protector Nissan Sentra: Advanced anti-explosion effect, strengths the hardness to 9H, enables to mitigate the wallop and prevent from scratching. It does not cause fragmentation and damage to the human body and the screen even if it ruptures, and still remain the whole one piece.
  • Upgraded Nissan Sentra Screen Protector : The effect of anti-fingerprint has significant enhanced by contrast the traditional screen protector. No longer fingerprint leaves on the screen protector.
  • Easy Installation: Aligning the four corners and install it, then Nissan Altima screen protector can be effectively installed to the screen, without any air bubbles leaving.
  • Great Structure: The Nissan Rogue screen protector could always keep wet and have a smooth touch feel, in addition, it can reduce the glare due to there is a layer of scrub coating.

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...