“This site contains affiliate links for which OEMDTC may be compensated” |
NTB06-065C
September 4, 2007
POWER WINDOW “AUTO UP” INOPERATIVE
This bulletin amends NTB06-065b. The Applied Vehicles has been expanded. Please discard all previous versions of this bulletin.
APPLIED VEHICLES:
2007 – 2008 Versa (C11)
2007 – 2008 Altima Sedan (L32)
2007 – 2008 Altima Hybrid (HL32)
2008 – Altima Coupe (CL32)
2004 – 2008 Armada (TA60)
2005 – 2008 Frontier (D40)
2004 – 2008 Maxima (A34)
2003 – 2007 Murano (Z50)
2005 – 2008 Pathfinder (R51)
2004 – 2008 Quest (V42)
2007 – 2008 Sentra (B16)
2004 – 2008 Titan (A60)
2005 – 2008 Xterra (N50)
2003 – 2008 350Z (Z33)
2008 Rogue (S35)
IF YOU CONFIRM
A power window “Auto Up” will not work.
ACTION
Perform the following initialization procedure:
- Turn the ignition switch ON.
- Open the window—all the way DOWN.
- Pull all the way UP on the switch and hold (close the window).
- Continue holding the switch all the way UP for 4 seconds after the window is closed.
- Confirm the window is now operating correctly.
NOTE:
- If the window is still not operating correctly, refer to ASIST and the Service Manual for further diagnosis and repair information.
- The above initialization procedure must be performed if any of the following occur:
- Battery cable is disconnected
- Power window switch connector is disconnected
- Power window regulator is replaced
- Power window motor is replaced
- Window glass is removed
- Window glass run rubber is replaced
- Power window fuse is blown
- Window is partly opened and/or closed many times without being fully closed.