“This site contains affiliate links for which OEMDTC may be compensated” |
July 18, 2023 NHTSA CAMPAIGN NUMBER: 23V496000
Loss of power steering assist can increase the steering effort required, especially at low speeds, and increase the risk of a crash.
NHTSA Campaign Number: 23V496
Manufacturer Nissan North America, Inc.
Components STEERING
Potential Number of Units Affected 11,824
Summary
Nissan North America, Inc. (Nissan) is recalling certain 2021 Versa and Kicks vehicles. An intermittent electrical connection in the electric power steering (EPS) torque sensor can disable the power steering assist.
Remedy
Dealers will inspect the steering column torque sensor lot code and replace the steering column assembly, if necessary, free of charge. Owner notification letters are expected to be mailed September 8, 2023. Owners may contact Nissan’s customer service at 1-800-867-7669. This recall involves vehicles that were previously inspected, but did not receive a steering column replacement, under recall number 22V-693. These vehicles will need to be reinspected for this recall.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Nissan has a Recall
Steering Column
Voluntary Safety Recall Campaign
Reference: PMA25/PMA26
Date: July 26, 2023
IMPORTANT: It is a violation of Federal law for dealers to sell or deliver new vehicles in their inventory covered by this notification until the campaign’s final remedy action is performed.
PMA25 (Vehicles not previously inspected or remedied under PMA10)
Affected Models/Years: | Affected Population: | Dealer Inventory: | SERVICE COMM Activation date: | Stop Sale In Effect |
MY2021 Versa (N18) | 2,291 | NA | July 26, 2023 | YES |
MY2021 Kicks (P15) | 4,004 | NA |
PMA26 (Vehicles previously inspected and released under PMA10)
Affected Models/Years: | Affected Population: | Dealer Inventory: | SERVICE COMM Activation date: | Stop Sale In Effect |
MY2021 Versa (N18) | 2,820 | NA | July 26, 2023 | YES |
MY2021 Kicks (P15) | 9,005 | NA |
***** Campaign Summary *****
Nissan is committed to the safety and security of our customers and their passengers. Nissan has notified the National Highway Traffic Safety Administration (NHTSA) and Transport Canada that it is issuing a recall for vehicles previously inspected and released under campaign PMA10 because it has received notification from the supplier of additional steering column torque sensor lot codes that were not previously provided. Nissan is conducting a recall campaign to re-inspect all vehicles that were previously inspected and released without steering column replacement under campaign PMA10.
The specific vehicles subject to these campaign ID’s have been removed from campaign ID PMA10, which is being closed, and are being relaunched under new campaign ID’s PMA25 and PMA26. Campaign ID PMA25 will include vehicles that were not previously inspected or remedied under PMA10, and PMA26 will include vehicles that were inspected and released without steering column replacement under PMA10.
Due to a supplier manufacturing concern, which since has been corrected, an intermittent electrical connection in the electric power steering (EPS) torque sensor can disable the EPS assist in affected vehicles. In the event of an EPS failure, the Power Steering Warning Light will illuminate in the instrument cluster to alert the driver and the steering system will default to manual steering mode. The mechanical steering linkage is maintained at all times. However, loss of EPS will require higher steering effort, especially at low speeds, which may increase the risk of a crash.
Dealers will inspect the lot code on the EPS torque sensor and, if necessary will replace the steering column assembly.
***** Release Schedule *****
Parts
If inspection results indicate that parts replacement is needed, part 48935-3BA0A is on restriction and may be ordered through DBS. Remaining parts ordered via normal process.
Part Number | Description | Quantity |
01125-N6061 | BOLT (Knee Air Bag Module) | 2 |
48935-3BA0A | BOLT (Steering Wheel) | 1
(If Needed) |
48810-5EE0A | COLUMN ASSY – STEERING, UPPER | 1
(If Needed) |
NOTE: Parts replaced under this activity may be collected through the Nissan Part Return Program. If a Part Return Required Notification is received by the dealer, it is important for dealers to return parts applicable specifically to the VIN and repair order identified.
Special Tools
- White Crayon
Repair
- NTB22-079
Owner Notification
Owners of all previously inspected vehicles that were judged not to need a steering column replacement under PMA10 will be notified beginning on September 8, 2023, to bring their vehicle to the dealer for re-inspection.
Frequently Asked Questions (FAQ):
Is this a Safety recall?
Yes.
Is this a Stop Sale?
Yes.
What is the reason for the Voluntary Safety Recall?
Due to a supplier manufacturing concern, which since has been corrected, an intermittent electrical connection in the electric power steering (EPS) torque sensor can disable the EPS assist. In the event of an EPS failure, the Power Steering Warning Light will illuminate in the instrument cluster to alert the driver and the steering system will default to manual steering mode. The mechanical steering linkage is maintained at all times. However, loss of EPS will require higher steering effort, especially at low speeds, which may increase the risk of a crash.
Nissan is conducting a recall campaign to re-inspect all vehicles that were previously inspected and released under Recall 22V693 (campaign PMA10) to inspect for additional affected lot codes, and replace the steering column assembly if necessary.
What is the possible effect of this condition?
If this condition occurs, the Power Steering Warning Light will illuminate in the instrument cluster to alert the driver and the steering system will default to manual steering mode. The mechanical steering linkage is maintained at all times. However, loss of EPS will require higher steering effort, especially at low speeds, which may increase the risk of a crash.
What will be the corrective action for this voluntary recall campaign?
Dealers will inspect the lot code on the torque sensor and, if necessary will replace the steering column assembly.
How long will the corrective action take?
This free service could take up to one and a half (1.5) hours to complete but your Nissan dealer may require your vehicle for a longer period of time based upon their work schedule.
When will vehicle owners be notified?
Owners of all previously inspected vehicles that were judged not to need a steering column replacement under PMA10 will be notified beginning on September 8, 2023, to bring their vehicle to the dealer for re-inspection.
Nissan notified owners of all vehicles that were potentially affected by PMA10 in November 2022, Via U.S. Mail.
Is my vehicle safe to drive?
If your vehicle is subject to this campaign, you will receive an Owner Notification letter from Nissan, which will provide instructions on how to remedy your vehicle. Affected owners are encouraged to have their vehicles repaired as soon as possible upon notification.
Is there anything owners can do to mitigate this condition?
No.
Are parts readily available?
Yes, parts are currently on restriction and may be ordered through DBS.
Will a rental vehicle be provided while the dealer is servicing the vehicle?
Please consult your dealer for alternate transportation availability while your vehicle is being serviced. Rental is available upon customer request, while parts are on order.
EXPENSE CODE | DESCRIPTION | AMOUNT |
502 | Rental Expense | $156 (Max) |
Contact the Warranty claims call center 1-800-258-7008 Option 7, if additional expense is required. Please refer to the Goodwill Rental Guidelines in the APRM for detailed information regarding application of rental reimbursement. |
Is there any charge for the repair?
No. The remedy will be performed for the customer free of charge for parts and labor.
Will I have to take my vehicle back to the selling dealer to have the service performed?
No, any authorized Nissan dealer is able to perform the service.
For Consumer Affairs: Please inform us of the dealer where you would like to have the service completed.
I have lost confidence in the vehicle. Will Nissan replace or repurchase the vehicle?
The remedy will fully correct this condition. As the condition will be corrected, there is no basis for repurchasing or replacing your vehicle.
What model year vehicles are involved?
Certain MY2021 Nissan Versa and Kicks vehicles manufactured from July 19, 2021 to September 27,
Are you experiencing this condition on any other Nissan (or INFINITI) models?
No.
Description of the Defect:
In some of the affected vehicles, an intermittent electrical connection in the electric power steering (EPS) torque sensor can disable the EPS assist. In the event of an EPS failure, a Power Steering Warning Light will illuminate in the instrument cluster to alert the driver and the steering system will default to manual steering mode. The mechanical steering linkage is maintained at all times. However, loss of EPS will require higher steering effort, especially at low speeds, which may increase the risk of a crash.
Chronology of Principal Events:
December 2021 – Nissan opened an investigation for a field incident alleging sudden loss of EPS assist on a Model Year 2021 Nissan Versa vehicle. This incident appeared to be similar to an incident that occurred in Mexico market on a Nissan Kicks in September 2021. Nissan launched an investigation, together with the supplier, into the issue.
January 2022 – During the investigation, it was unclear if this was the same issue that caused the EPS failure in Mexico market. In order to better understand the issue, Nissan launched a dealer action on January 31, 2022 to collect parts. In parallel, Nissan launched a study to investigate the effect of EPS loss on steering effort.
February 2022 -As part of the study, Nissan collected 7 parts for analysis. Initial examination pointed to a potential issue with the torque sensor.
March 2022 through May 2022 – The supplier’s investigation confirmed poor weld penetration at the terminal within the torque sensor that may have led to a disconnection of the terminal welds within the affected steering column torque sensor. The supplier worked to identify the potentially affected population based on internal production records. The supplier identified lot codes for potentially affected torque sensors.
Nissan initiated a pre-delivery inspection on in-transit vehicles and within dealer inventory to check for the potentially affected torque sensors. These parts were collected and sent to the supplier for analysis.
June 2022 through August 2022 – Nissan worked with the supplier to identify potentially affected vehicles.
September 8, 2022 – In an abundance of caution, Nissan decided to conduct a Voluntary Safety Recall Campaign to inspect all potentially affected vehicles and replace the steering column if an affected lot code was identified on the torque sensor.
May 2023 through June 2023 – Nissan received notification from the supplier indicating that certain steering column torque sensor lot codes were not provided at the time of the original recall (Recall 22V-693). Nissan reviewed the additional lot codes the supplier provided and investigated the impact of these missing lot codes on the steering column torque sensor inspection procedure for Recall 22V-693.
July 71, 2023 – Nissan decided to conduct a recall campaign out of an abundance of caution to re-inspect all 77,824 vehicles that were previously inspected and judged not to need a steering column replacement under Recall 22V-693, to determine if steering column replacement is necessary.
NTB22-079 – 2021 Nissan Kicks & Versa; Steering Column
2 Affected Products
Vehicles
MAKE | MODEL | YEAR |
NISSAN | KICKS | 2021 |
NISSAN | VERSA | 2021 |
5 Associated Documents
Recall Acknowledgement
RCAK-23V496-1283.pdf 645.976KB
Defect Notice 573 Report
RCLRPT-23V496-5221.PDF 214.596KB
Nissan – Defect Investigation Report – July 2023
RMISC-23V496-7557.pdf 1189.525KB
Nissan – 2021 Versa Kicks Steering Column Dealer Announcement – July 2023
RCMN-23V496-9505.pdf 136.612KB
Remedy Instructions and TSB
RCRIT-23V496-1463.pdf 2568.473KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V496&docType=RCL
- 【Wifi Upgrade】- After you receive our products, for better product experience as well as car diagnositic, please connect to wifi/phone hotspot and accept or take the initiative to update APP operating system and car brand diagnostic software.
- 【Professional 6 System Diagnosis】- This OBD2 scanner has the most commonly system: ABS, SRS, Transmission, Engine, BCM and TPMS, which offers solution to pinpoint troubles of your cars.
- 【7 Most Useful Reset Services】- The car scanner can provides 7 hot maintenance reset: Oil EPB SAS ETS TPMS ABS DF. These powerful reset functions will make your car safer and more reliable.
- 【5" Large HD Touchscreen】- This car diagnostic scanner is equipped with a 5" color HD touchscreen: Compared with other screens, the displayed data and charts will be clearer.
- 【4 in 1 Live Data Display】- The car scanner tool shows live data of each control module by text or graphs, up to 4 parameters can be displayed at the same time. Test reports are easy to share and print.
- 💗💗【WARM NOTICE】✅We can provide the "X431 PADVII online programming activation method" & the instruction on how to use VPN to bypass IP restrictions to gain access to online programming feature for more models, not just for Benz & BMW in the U.S.; ✅LAUNCH Tech. USA is one of the dealers located in America, so they won't offer help for our products. We take responsibility for the problems.
- 🥇【LAUNCH X431 PAD VII ELITE, 2024 Top Diagnostic Scanner】 The latest all-around scan tool, upgraded from LAUNCH X431 PRO5/PADIII/V+ 4.0 and rival OEM car scanners. High-end ECU programming backup/restore for 30+ car brands, ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 60+ service functions, guided functions, highest hardware configuration … with 99.99% worldwide car coverage. LAUNCH X431 PAD VII ELITE is a worthwhile investment for repair shops and mechanics.
- 【Huge-Upgraded ECU Programming & Coding】 Beyond the reach of most competitors, LAUNCH X431 PAD VII ELITE features ECU Programming working on upmost 30+ car brands: 1) Backup/Restore data from original ECUs, you won't find this in any other tools; 2) Programming offline or online, manual or automatic to meet more needs; 3) R-etrofit, e.g. replace halogen lamp. 4) ECU Upgrade, e.g for Fuel quality defect firmware. Coding features: Recode ECU Data, Personalization, and loads of more.
- 【LAUNCH X431 PAD VII ELITE, 60+ Services & Topology】 LAUNCH X431 PAD VII ELITE bidirectional scan tool has 60+ service functions, like Oil Reset/ABS Bleeding/Injector Coding… to win more business. Topology mapping checks DTCs and all-system communication status visually in LAUNCH X431 PAD VII ELITE top scanner. The actuation test detects problems 5X faster than tearing autoparts apart. Multiple protocols: J2534, RP1210/D-PDU (for HD cars), Do-IP (BMWs E/F, Land Rover/Jaguar), CANFD (new GM).
- 【Intelligent Diagnose & Guided Functions】LAUNCH X431 PAD VII ELITE scan tool has Intelligent Diagnose to free you from tedious works: easily get VIN data, guide you to vehicle information page without menu selection, and display all diagnostic records. Guided Function (for V.A.G) allows on-screen prompts for proper diagnostics, simple & convenient. Pin Detection allows detecting DLC pins voltage and accessing protocol types to troubleshoot your DLC port.
- 【2024 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- 【2024 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- 【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- 👍[New & Outstanding X431 PRO5 Scanner] LAUNCH X431 PRO5 scan tool, upgrade of LAUNCH X431 PRO3 & X431 V+ PRO, configures a SmartBox 3.0 VCI (J2534/DoIP/CAN FD compliant) that performs online programming for BMW & Benz models as OEM level. More powerful features: Online Coding for Porsche/Audi, Heavy-duty Truck Diagnostics, VAG Guided Functions, 50+ Services, etc., bring ease & efficiency. Powerful software even covers online diagnostics for FCA cars & newer model data.
- [J2534 Programming with Smartbox3.0] If you’re seeking all-in-one solutions for car ECU tuning needs, LAUNCH X431 PRO5 programming tool is ready to work for you. Support online programming for BMW&Benz and hold exclusive programming backup/restoration. Come with a Smartbox 3.0 device of J2534 standard and pair with a PC to download OEM software to upgrade the ECU software, which maximizes the vehicle performance and minimizes diagnostic problems.
- [ECU Coding Customizes All You Want] With top of the tech instruction and vehicle data, LAUNCH X431 PRO5 diagnostic scanner performs well in ECU Coding and makes everything easier 1) recode adaptive data after ECU replacement 2) personalization/retrofit to improve car comfort: deactivate auto start-stop or change interior lights 3) coding data backup/reserve 4) online coding for BMW/Benz/Porsche/VW/Skoda/Seat 5) online matching/calibration for VW/for Audi, etc.
- [Huge Vehicle Software Database] LAUNCH scanner PRO5 can be nominated as a powerful troubleshooter for 99% of post 1996-automobiles. Provide abundant exclusive functions for effortless diagnostics: Benz/BMW Data Backup/Restoration; Benz/BMW Manual Mode Programming; Benz SCN Coding/Variant Coding; BMW Coding (with newer data to 2022.03); AutoAuth for FCA SGW(2018 later); Various Online Coding Data for VW/for Audi, etc. 2-Year free updating will keep renewing the data for more vehicles.
- [AutoAuth Access & 50+ Services] Partnered AutoAuth FCA US, LAUNCH scanner can directly login to the AutoAuth account and secure check (reading DTC, active test, reset functions, etc.) for FCA vehicles. 50+ services that are needed for repair shops have been packed in X431 PRO5 auto scanner, such as Hot functions (Oil Reset, EPB Reset, SAS Reset, ABS Bleeding, etc.) and Comprehensive functions (High Voltage Battery Diagnostics, Transport Mode),
- LAUNCH X431 PAD VII Elite,2024 Top Diagnostic Scanner: High-end ECU programming backup/restore for 30+ car brands scan tool, ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 60+ Reset, guided functions.
- Huge-Upgraded ECU Programming & Coding: Working on 30+ car brands:1) Backup/Restore data from original ECUs;2) Online Programming;3) R-etrofit;4) ECU Upgrade.Coding features:Recode ECU Data, Personalization and loads of more.
- UNMATCHED COVERAGE: Launch X431 PADVII diagnostic tool works on over 200 car brands, support 12/24V passenger cars and commercial vehicles;Secured Gateway Access (SGW). and J2534/D-PDU/RP1210 and CAN2.0/CAFD/DoIP protocols.
- TOP INTELLIGENT DIAGNOSTIC: LAUNCH X431 PADVII offer topology mapping overview all-systems status.Pin detection to detect pin volt, data rate.Guided functions,repair tips,DTC Analysis,Component Measurement,and Relevant Cases.
- [ Pin Detection & Guided Functions] LAUNCH X431 PAD VII scan tool with Guided Function (for V.A.G) allow on-screen prompts for proper diagnostic. Pin Detection allow detecting DLC pins voltage and access protocol types to troubleshoot your DLC port.
- ✅【2022 Update Obd2 Scanner Diagnostic Tool】ANCEL V6 Plus+ OBD2 Scanner Diagnostic Tool is an improved version of V6 Pro, upgraded from wired to wireless Bluetooth connection, while adding 10 advanced functions. V6 Plus+ supports bidirectional control, active testing, OE-level full diagnosis, 25 services, key programmer, auto VIN& Scan, and free updates 2 years.
- ✅【 25+ Special Service Hot Functions】ANCEL V6 Plus+ obd2 scanner diagnostic tool covers almost all commonly used services include Bidirectional Control, Active Test, key programmer, Oil Reset, ABS Brake Bleeding, EPB Service, SAS, DPF, BMS Reset, Throttle Reset, Injector Coding, Headlight, Transmission, A/F Settings, GEAR, NOX Set, PUMP, Seat Set, Stop/Start Reset, Tire Set, UREA Set,Sunroof, etc. 📣More new features will get after the update. ANCEL V6 Plus+ obd2 scanner diagnostic tool is to spend your less time and money to solve more problems.
- ✅【Car Key Programmer Tool】ANCEL V6 Plus+ is not only a car diagnostic tool, it is also a Car Key Programmer Tool, If your car key is lost or the key fob is broken, getting a replacement can be a hassle and cost you much money. ANCEL V6 Plus+ Bluetooth key fob programming tool allows you to Add a key/ new key programming, All keys replaced, Read keys from IMMO memory, Key cloning, etc., ❗Only some specific vhicles available now, pls confirm before purchase.
- ✅【Bi-Directional Control / Active Test】V6 Plus+ professional bi-directional scan tool can send commands and receive information to and from a vehicle’s onboard computer. Those commands will make the module perform specific tests and functions. Such as Window/Mirror/Door Lock Test, Fuel Pumps test, EGR test, Modulate the throttle and more. It is preferred by many car repair shop owners and professional mechanics, advanced DIYers to make it even easier to correctly repair vehicles.
- ✅【OE-Level Full System Diagnostics for Over 120+ Car Makers】ANCEL V6 Plus+ OBD2 Scanner works with 120+ car manufacturers and It works on 99% cars models made in 1996-2022, Let you more comprehensive and professional to diagnose ABS, SRS, Engine, Transmission, TPMS, Brake System, Suspension System, BODY and much more Possible cause of failure, And allows you can to quickly and accurately read and clear fault codes. if you meet any questions Give us your car’s VIN data and consult us anytime pls.
- 🔥【2024 NEW RELEASE XTOOL DIAGNOSTIC TOOL】XTOOL InPlus IP616 OBD2 scanner diagnostic scan tool has packed ✅Lifetime Free Updates, ✅Android 10✅31 Services✅Up To 8 Live Data Graphing✅All Systems Diagnosis✅Key Programming✅CAN FD ✅Reflash Hidden Functions✅Export Data to CSV ✅Data View, etc, into this portable 7-Inch tablet, which makes it a great choice for DIYers, Car Owners, Retired Mechanics who need a portable add-on scan tool. 🚩Getting responsive answers via 📧 xtoolstore @ outl ook . c om📧
- 🔥【31 SERVICES】IP616 car diagnostic scanner covers 31 popular special functions of car service tools in the market, such as ABS Bleed, Oil Reset, DPF, EPB, BMS Reset, HV Battery, Power Balance, SAS, A/C Relearn, VGT Relearn Injector Coding, TPMS Reset, Throttle, Headlight, Crankshaft sensor Relearn, Suspension, Transmission Match, Tire Upgrade, etc 🚩Functions vary across vehicles. Come to us with VIN and functions to check the compatibility via QA or 📧 xtoolstore @ outl ook .c om📧.
- 🔥【ECU CONFIGURATION &KEY PROGRAMMING】XTOOL IP616 capable of both of these functions typically cost more than $600. Get the most out of your car today! Unlock hidden features and customize your car with ECU Configuration function. Say goodbye to annoying functions like daytime running lights and seat belt chimes. And that's not all; with key programming functions, like adding new keys and remote learning,etc. But remember, compatibility is key, so check your vehicle's VIN # before purchasing.
- 🔥【ALL SYSTEMS DIAGNOSIS & UP TO 8 LIVE DATA GRAPHING】InPlus IP616 car scanner tool can perform complete system diagnoses to read / clear trouble codes, view / graph live data PIDs like oil temperature, transmission fluid temperature, coolant temperature, engine speed, etc, retrieve freeze frame and read ECU Information. Graph up to 8 live data PIDs into one chart or display up to 8 individual graphs on one screen🚩NO Active tests and and Live data streams on each vehicles might be different.
- 🔥【CAN FD & 10,000+ VEHICLES COVERAGE & MULTILINGUAL】IP616 OBD2 scanner works on more than 10,000 vehicles globally, including brands of America, Europe, Asia, Australia, China and the coverage will grow continuously with frequent updates. IP616 also supports CAN FD protocol(for GM 2020+ MY), no need for adapters. Besides, IP616 is equipped with 14 languages, no worry about the language barrier.
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on, quickly read and clear diagnostic trouble codes, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. Instead of taking car to mechanic shop, you can use it to check the trouble code and show code definition by yourself.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed device with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble codes in seconds. If you want to find out the cause of the check engine light, this device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. This is not the case with the AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Check compatibility with your vehicle model before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- 🎁🎁【Professional but Easier-to-use for Home】Tired of going to Autozone or other store to run codes, or having to pay the dealer to do it for you? IFIX435 code scanner is your ticket to happiness.Compared to the complexity of the car diagnostics available on the market with unit prices above $200, BOSSCOMM IFIX435 code reader is one of the best investments you can make!
- 🚘🚘【OE-Level All System Diagnostic Tool】Whether you're troubleshooting engine problems, abs, airbag, transmission issues, Bosscomm diagnostic tool easily find and fix the problem with your vehicle. IFIX435 obd2 scanner supports not only Engine, ABS, Transmission, but also EPB, TPMS, SAS, A/C, chassis and other system scans. By reading the ECU version information of each system, providing a🔥 live data stream, 🔥reading the trouble codes and🔥 retrieves freeze-frame, saving home repairers a lot of time and money in maintenance.
- 📈📈【Real Deal-LIVE DATA】Real-time, dynamic data is sure to streamline your work! BOSSCOMM IFIX435 car diagnostic scanner for all cars can get instant access to key information about your vehicle's RPM, oil temperature, and more, making diagnosis easier than ever before. Permitting you to see live information streams an even take previews and record this information for later playback.👍Easy to use without space limitations,and actuators to quickly uncover and solve any issues.
- 👍👍【Lifetime F-ree One-Click Update 】How much have you spent on car maintenance?The code reader is permanently updated for f-ree, which save you a lot of money in the long-term.You can connect to your home WiFi or personal hotspot to update it to get newest software and more car coverage.Buy once and be set for life with this device.
- 👍👍【Wide Vehicle Coverage Global Mechanics】The BOSSCOMM IFIX435 code reader for cars and trucks can diagnose over 10000+ vehicles(60+ car brands) worldwide mainstream car makes(USA/ASIA/EUROPE), works on OBDII most after 1996 vehicles including the latest 2023 models.It supports 13 different languages at the same time, which can satisfy users all over the world.
- ✔Full OBDII Modes Scanner for Car: As professional car scanner, ZM201 has all the OBD2 functions you need.🔎Read & clear codes, 💡turn off engine light or MIL, ❄view freeze frame, 📋read I/M readiness, 🚕retrieve vehicle VIN, 🔋battery voltage test, 📈live data stream (with graphing display), ✅built-in 35901 DTCs, O2 sensor test, onboard monitoring mode, and perform component testing etc.
- ✔Enhanced OBD2 Scanner Diagnostic Tool: Live data and DTC replay combined with printing function, you can connect it to a computer for fault data printing, prevent auto repair shops from charging randomly, save money and time. ZM201 obd scanner also comes with free-lifetime software updates, ensuring you always have the latest features and improvements.
- ✔35,901 DTC Lookup: ZM201 car code reader built-in 35,901 DTCs, the old model obd2 usually only have 3,000-10,000. So the ZM201 car scanner has a huge advantage, which means that this obd2 scanner can better help diagnose and solve your vehicle faults. This is a great option if you want to replace or upgrade an existing car scanner.
- ✔Compatible with 98% Vehicles: ZM201 OBD2 scanner for car is compatible with most cars after 1996(USA)/2002(EU)/2008(Asia). If your car has an OBD2 port (16Pin), and the production time meets the above timeline, then your vehicle is compatible. But it is not compatible with new energy vehicles, hybrid vehicles, and models that do not comply with the OBD2 protocol.
- ✔Convenient Shortcut Functions: The addition of shortcut keys enhances the user experience. Pressing F1 enables you to quickly retrieve trouble codes, while F2 provides instant access to I/M readiness information. We've also introduced left and right navigation buttons (the previous model had only up and down buttons), making operation even more convenient.
Last update on 2024-04-09 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
~ NISSAN ‘-…./ July 78, 2023 Dr. Cem Hatipoglu Acting Associate Administrator for Enforcement National Highway Traffic Safety Administration Attn: Recall Management Division (NVS-275) Room W48-302 7200 New Jersey Avenue, SE Washington, D.C. 20590 Dear Dr. Hatipoglu: Nissan North America, Inc. One Nissan Way Franklin, TN 37067 Mailing Address: PO Box 685001 Franklin, TN 37068 We are transmitting the enclosed Defect Information Report in accordance with 49 CFR Part 573. This Defect Information Report concerns MY2027 Versa and l
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-496 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Nissan North America, Inc. Submission Date : JUL 18, 2023 NHTSA Recall No. : 23V-496 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Nissan North America, Inc. Address : P. O. BOX 685001 Franklin TN 37068-5009 Company phone : 800-647-7261 Population : Number of potentially involved : 11,824 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2021-2021 Nissan Versa Vehicle Type : LIGHT VEHICLES Body Style : 4-DOOR Power Train : GAS Descriptive Information : The vehicles subject to this report were previously recalled vehicles that were judged not to need a steering column replacement. The production period for the previously inspected vehicles includes certain Model Year 2021 Nissan Versa and Nissan Kicks vehicles manufactured from July 19, 2021 to September 27, 2021 at the Aguascalientes plant. This issue (as described in Section 5 below) is specific to Nissan Versa and Kicks vehicles produced on a specific production line during the specified production period. No other Nissan or INFINITI vehicles are affected. Production Dates : JUL 19, 2021 – SEP 27, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 23V-496 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 2 : 2021-2021 Nissan Kicks Vehicle Type : LIGHT VEHICLES Body Style : HATCHBACK Power Train : GAS Descriptive Information : The vehicles subject to this report were previously recalled vehicles that were judged not to need a steering column replacement. The production period for the previously inspected vehicles includes certain Model Year 2021 Nissan Versa and Nissan Kicks vehicles manufactured from July 19, 2021 to September 27, 2021 at the Aguascalientes plant. This issue (as described in Section 5 below) is specific to Nissan Versa and Kicks vehicles produced on a specific production line during the specified production period. No other Nissan or INFINITI vehicles are affected. Production Dates : JUL 19, 2021 – SEP 27, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : In some of the affected vehicles, an intermittent electrical connection in the electric power steering (EPS) torque sensor can disable the EPS assist. In the event of an EPS failure, a Power Steering Warning Light will illuminate in the instrument cluster to alert the driver and the steering system will default to manual steering mode. The mechanical steering linkage is maintained at all times. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : However, loss of EPS will require higher steering effort, especially at low speeds, which may increase the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : In the event of an EPS failure, a Power Steering Warning Light will illuminate in the instrument cluster to alert the driver and the steering system will default to manual steering mode. Involved Components : Component Name 1 : COLUMN ASSY – STEERING Component Description : Upper Steering Column Component Part Number : 48810-5EE0A Part 573 Safety Recall Report 23V-496 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : JTEKT AUTOMOTIVE MEXICO Address : Avenida Montecillo #100 Parque Industria Villa de Pozos San Luis Potosi Foreign States 78423 Country : Mexico Chronology : See attached Part 573 for chronology. Description of Remedy : Description of Remedy Program : The dealer will re-inspect the steering column torque sensor lot code and replace the steering column assembly, if necessary. All inspections and repairs will be performed free of charge for parts and labor. Nissan will not include a statement in the Part 577 owner notification concerning reimbursement for the cost of obtaining a pre-notification remedy for the subject vehicles because they are still under warranty How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : Dealers will be notified beginning July 25, 2023 of the new recall. Owners of all previously inspected vehicles that were judged not to need a steering column replacement will be notified beginning on September 9, 2023, to bring their vehicle to the dealer for re-inspection. Planned Dealer Notification Date : JUL 26, 2023 – NR Planned Owner Notification Date : SEP 08, 2023 – NR * NR – Not Reported
**************************************************************************************************************
CAMPAIGN BULLETIN Steering Column Voluntary Safety Recall Campaign Reference: PMA25/PMA26 Date: July 26, 2023 Attention: Dealer Principal, Sales, Service & Parts Managers SAFETY RECALL CAMPAIGN ID: PMA25/PMA26 | Original Document IMPORTANT: It is a violation of Federal law for dealers to sell or deliver new vehicles in their inventory covered by this notification until the campaign’s final remedy action is performed. PMA25 (Vehicles not previously inspected or remedied under PMA10) PMA26 (Vehicles previously inspected and released under PMA10) ***** Campaign Summary ***** Nissan is committed to the safety and security of our customers and their passengers. Nissan has notified the National Highway Traffic Safety Administration (NHTSA) and Transport Canada that it is issuing a recall for vehicles previously inspected and released under campaign PMA10 because it has received notification from the supplier of additional steering column torque sensor lot codes that were not previously provided. Nissan is conducting a recall campaign to re-inspect all vehicles that were previously inspected and released without steering column replacement under campaign PMA10. The specific vehicles subject to these campaign ID’s have been removed from campaign ID PMA10, which is being closed, and are being relaunched under new campaign ID’s PMA25 and PMA26. Campaign ID PMA25 will include vehicles that were not previously inspected or remedied under PMA10, and PMA26 will include vehicles that were inspected and released without steering column replacement under PMA10. Due to a supplier manufacturing concern, which since has been corrected, an intermittent electrical connection in the electric power steering (EPS) torque sensor can disable the EPS assist in affected vehicles. In the event of an EPS failure, the Power Steering Warning Light will illuminate in the instrument Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale In Effect MY2021 Versa (N18) 2,291 NA July 26, 2023 YES MY2021 Kicks (P15) 4,004 NA Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale In Effect MY2021 Versa (N18) 2,820 NA July 26, 2023 YES MY2021 Kicks (P15) 9,005 NA CAMPAIGN ID: PMA25/PMA26 | Original Document cluster to alert the driver and the steering system will default to manual steering mode. The mechanical steering linkage is maintained at all times. However, loss of EPS will require higher steering effort, especially at low speeds, which may increase the risk of a crash. Dealers will inspect the lot code on the EPS torque sensor and, if necessary will replace the steering column assembly. ***** What Dealers Should Do**** 1. Verify if vehicles are affected by this Voluntary Recall Campaign using Service Comm or DBS National Service History Campaign I.D. PMA25 or PMA26. 2. Dealers must not sell, lease, trade, rent, or loan any vehicles in dealer inventory affected by this recall campaign until after the vehicle has been repaired. 3. Dealers should use NTB22-079 to remedy any vehicles subject to this campaign. 4. Once remedied, dealers should submit the claim, using the claims coding provided, and release the vehicle. 5. Nissan is requesting that dealers submit any open claims for remedies under PMA10 by August 15, 2023. ***** Release Schedule ***** Parts If inspection results indicate that parts replacement is needed, part 48935-3BA0A is on restriction and may be ordered through DBS. Remaining parts ordered via normal process. Part Number Description Quantity 01125-N6061 BOLT (Knee Air Bag Module) 2 48935-3BA0A BOLT (Steering Wheel) 1 (If Needed) 48810-5EE0A COLUMN ASSY – STEERING, UPPER 1 (If Needed) NOTE: Parts replaced under this activity may be collected through the Nissan Part Return Program. If a Part Return Required Notification is received by the dealer, it is important for dealers to return parts applicable specifically to the VIN and repair order identified. Special Tools • White Crayon CAMPAIGN ID: PMA25/PMA26 | Original Document Repair • NTB22-079 Owner Notification Owners of all previously inspected vehicles that were judged not to need a steering column replacement under PMA10 will be notified beginning on September 8, 2023, to bring their vehicle to the dealer for re-inspection. ***** Dealer Responsibility ***** It is the dealer’s responsibility to check Service Comm or DBS National Service History using the appropriate Campaign I.D. for the campaign status on each vehicle falling within the range of this voluntary safety recall campaign, which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in dealer inventory. If a VIN subject to this recall campaign was part of a dealer trade, the letter associated with that VIN should be forwarded to the appropriate dealer for service completion. NISSAN NORTH AMERICA, INC. Total Customer Satisfaction Frequently Asked Questions (FAQ): Q. Is this a Safety recall? A. Yes. Q. Is this a Stop Sale? A. Yes. Q. What is the reason for the Voluntary Safety Recall? A. Due to a supplier manufacturing concern, which since has been corrected, an intermittent electrical connection in the electric power steering (EPS) torque sensor can disable the EPS assist. In the event of an EPS failure, the Power Steering Warning Light will illuminate in the instrument cluster to alert the driver and the steering system will default to manual steering mode. The mechanical steering linkage is maintained at all times. However, loss of EPS will require higher steering effort, especially at low speeds, which may increase the risk of a crash. Nissan is conducting a recall campaign to re-inspect all vehicles that were previously inspected and released under Recall 22V693 (campaign PMA10) to inspect for additional affected lot codes, and replace the steering column assembly if necessary. CAMPAIGN ID: PMA25/PMA26 | Original Document Q. What is the possible effect of this condition? A. If this condition occurs, the Power Steering Warning Light will illuminate in the instrument cluster to alert the driver and the steering system will default to manual steering mode. The mechanical steering linkage is maintained at all times. However, loss of EPS will require higher steering effort, especially at low speeds, which may increase the risk of a crash. Q. What will be the corrective action for this voluntary recall campaign? A. Dealers will inspect the lot code on the torque sensor and, if necessary will replace the steering column assembly. Q. How long will the corrective action take? A. This free service could take up to one and a half (1.5) hours to complete but your Nissan dealer may require your vehicle for a longer period of time based upon their work schedule. Q. When will vehicle owners be notified? A. Owners of all previously inspected vehicles that were judged not to need a steering column replacement under PMA10 will be notified beginning on September 8, 2023, to bring their vehicle to the dealer for re-inspection. Nissan notified owners of all vehicles that were potentially affected by PMA10 in November 2022, Via U.S. Mail. Q. Is my vehicle safe to drive? A. If your vehicle is subject to this campaign, you will receive an Owner Notification letter from Nissan, which will provide instructions on how to remedy your vehicle. Affected owners are encouraged to have their vehicles repaired as soon as possible upon notification. Q. Is there anything owners can do to mitigate this condition? A. No. Q. Are parts readily available? A. Yes, parts are currently on restriction and may be ordered through DBS. CAMPAIGN ID: PMA25/PMA26 | Original Document Q. Will a rental vehicle be provided while the dealer is servicing the vehicle? A. Please consult your dealer for alternate transportation availability while your vehicle is being serviced. Rental is available upon customer request, while parts are on order. EXPENSE CODE DESCRIPTION AMOUNT 502 Rental Expense $156 (Max) Contact the Warranty claims call center 1-800-258-7008 Option 7, if additional expense is required. Please refer to the Goodwill Rental Guidelines in the APRM for detailed information regarding application of rental reimbursement. Q. Is there any charge for the repair? A. No. The remedy will be performed for the customer free of charge for parts and labor. Q. Will I have to take my vehicle back to the selling dealer to have the service performed? A. No, any authorized Nissan dealer is able to perform the service. For Consumer Affairs: Please inform us of the dealer where you would like to have the service completed. Q. I have lost confidence in the vehicle. Will Nissan replace or repurchase the vehicle? A. The remedy will fully correct this condition. As the condition will be corrected, there is no basis for repurchasing or replacing your vehicle. Q. What model year vehicles are involved? A. Certain MY2021 Nissan Versa and Kicks vehicles manufactured from July 19, 2021 to September 27, 2021. Q. Are you experiencing this condition on any other Nissan (or INFINITI) models? A. No. Revision History: Date Announcement Purpose July 26, 2023 Original Document New campaign announcement; and new campaign number announcement
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END