2016 NISSAN MURANO, ROGUE AND PATHFINDER; AROUND VIEW MONITOR MIRROR CAMERA INOPERATIVE

“This site contains affiliate links for which OEMDTC may be compensated”

SERVICE BULLETIN

Classification: Reference: Date:
EL16-027 NTB16-077 August 9, 2016

 

 

2016 MURANO, ROGUE AND PATHFINDER; AROUND VIEW MONITOR MIRROR CAMERA INOPERATIVE

 

APPLIED VEHICLE: 2016 Murano (Z52)
2016 Rogue (T32)
2016 Pathfinder (R52)

 

IF YOU CONFIRM

  • Either the left or right around view monitor door mirror camera is inoperative.

NOTE: The following DTCs may also be present:

  • U111B (Side Camera LH Image Signal Circuit) DTC is stored.

And/or

  • U111D (Side Camera RH Image Signal Circuit) DTC is stored.

 

ACTION

Check the side camera harness connection between the side camera and the mirror harness located inside the inoperative door mirror.

  • If the harness connector is not latched (can be disconnected by a gentle tug), seat the connector, clear the DTC and retest.
  • If the harness connector is latched (cannot be disconnected by a gentle tug) refer to the Electronic Service Manual (ESM) for further diagnostic information.

NOTE: If a side camera requires replacement, do not replace the entire mirror, replace only the side camera.

IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.

 

SERVICE PROCEDURE

For the affected side camera, inspect the side camera harness connector to mirror harness connection inside the mirror and confirm that it is latched completely as follows:

  1. Remove the door mirror glass from the side that has the inoperative camera.
  • Refer to the ESM, section AV – Audio, Visual & Navigation System, for removal information.
  • Do not remove the mirror assembly from the vehicle.

Door mirror glassFigure 1

 

  1. Locate the side camera harness connector to mirror harness connector (Figure 2).
  1. Attempt to separate the camera harness connector from the mirror harness connector with a gentle tug.
    • Did the side camera harness connector separate from the mirror harness connector?
      • YES: Reconnect the harness connector, confirm that is securely latched. Clear DTC, confirm the camera is working correctly, and then proceed to step 4.
      • NO: Refer to the ESM for further diagnostic information.
  1. Reassemble the door mirror in the reverse order of disassembly.

Mirror harness connectorFigure 2

 

CLAIMS INFORMATION

Submit a PP type line claim using the following claims coding:

DESCRIPTION PFP OP CODE SYM DIA FRT
Inspect Side Camera Harness Connection (1) UJ36AA ZE 32 (2)

 

(1) Refer to the electronic parts catalog (FAST) and use the Door Mirror Glass part number as the Primary Failed Part (PFP).

(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated flat rate time.


NTB16-077

https://www.nhtsa.gov/recalls?nhtsaId=10091513

https://static.nhtsa.gov/odi/tsbs/2016/SB-10091513-2280.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [323.26 KB]

 


 

Bestseller No. 1
LAUNCH X431 PRO3S+Smartlink HD Heavy Duty Truck Scanner,2024 Top Diesel&Gasoline Bidirectional Diagnostic Scan Tool with J2534 Reprogramming,Topology Map,60+Service,ECU Coding,CANFD &DOIP,Free Update
  • 【2024 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
  • 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
  • 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
  • 【2024 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
  • 【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
SaleBestseller No. 2
LAUNCH X431 PADVII Elite, ECU Reprogramming Tool, Online Coding, J2534/RP1210/D-PDU/Do-IP/CANFD, Topology Map Diagnostic Scanner, FCA SGW, 60+ Reset, Active Test, 2 Years Free Update Car Scanner
  • [LAUNCH scanner PAD VII, Top 1 of X431 Scan Tool] Upgraded from the LAUNCH X431 PRO5/X431 V+5.0/XTOOL D9S, inherits the excellent functions of its predecessors and optimizes them in efficiency and wider compatibility. 1)ECU programming with backup and restore capabilities for over 30 car brands. 2)ECU/SCN coding. 3)Support J2534, RP1210, D-PDU, Do-IP, and CANFD protocols. 4)With topology mapping, over 60 Reset, guided function, highest hardware configuration, cover 99.99% of cars worldwide.
  • [ECU Programming& Coding, Turn Complexity into Simplicity] The LAUNCH X431 PAD VII ELITE surpasses most competitors with its ECU programming capabilities for over 30 car brands. 1)Program the blank/used ECUs, capable of rep/la//cing the exist software & firmware and programming new ECUs. 2)Upgrade the ECU software version. 3)The diagnostic scanner offers backup and restore data from original ECUs, not found in other tools. 5)Coding features: Recode ECU Data, Personalization, and loads of more.
  • [UNMATCHED COVERAGE, 12/24V Passenger & Commercial vehicles] 2024 LAUNCH diagnostic tool works on 200+ car brands(1987-2024), 1)FCA Secured Gateway Access (SGW) Authorization "OE-level coverage for Asian, Euro, Domestic Cars. 2)This advanced launch scanner supports J2534, RP1210/D-PDU protocols for heavy-duty vehicles, Do-IP for BMW E/F and Land Rover/Jaguar models, and CANFD for new GM models. ✔With frequent updates and optimizations allow LAUNCH X431 PADVII to cover more vehicles.
  • [Intelligent Diagnostics, 200% Efficiency] LAUNCH X431 PAD VII ①Topology mapping feature visually checks DTCs and All-system communication status.②Pin Detection allow detecting DLC pins voltage and accessing protocol types to troubleshoot DLC port.③ Guided Function for V.A.G vehicles offer on-screen prompts for accurate diagnostics, simplifying the process.④Provide Repair tips, DTC Analysis, Component Measurement, and Relevant Cases to help diagnosis and repair efficiency to the greatest extent.
  • [60+ Reset Functions, Constantly Updating] LAUNCH X431 PADII diagnostic tool has packed almost all tasks of a professional automotive scan tool. It can perform Oil Reset, EPB, SAS Calibration, Power Balance, Idle Relearn, ABS/Window Initialization, HVAC Calibration, etc. ✔Full bidirectional scan tool to quickly locate the fault, identifies problems five times faster than traditional methods. like EVAP Tests, A/C Clutch Test, Lane Keeping Assist, window, door, sunroof test etc.
Bestseller No. 3
LAUNCH X431 PAD VII Elite, 2024 Newest Top J2534 Reprogramming Tool, Intelligent Topology Map Bi-Directional Diagnostic Scanner, ECU Coding, 2 Years Free Update, 60+ Services, Upgraded of X431 PRO5
  • 💗💗【WARM NOTICE】✅The "X431 PADVII online programming activation method" & the instruction on how to use VPN to bypass IP restrictions to gain access to online programming feature for more models, not just for Benz & BMW in the U.S. is available if you need; ✅LAUNCH Tech. USA is just one of the dealers located in America, so they won't be responsible for Amazon products. Pls con-tact us If you have any problems.
  • 🥇【LAUNCH X431 PAD VII ELITE, 2024 Top Diagnostic Scanner】 The latest all-around scan tool, upgraded from LAUNCH X431 PRO5/PADIII/V+ 4.0 and rival OEM car scanners. High-end ECU programming backup/restore for 30+ car brands, ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 60+ service functions, guided functions, highest hardware configuration … with 99.99% worldwide car coverage. LAUNCH X431 PAD VII ELITE is a worthwhile investment for repair shops and mechanics.
  • 【Huge-Upgraded ECU Programming & Coding】 Beyond the reach of most competitors, LAUNCH X431 PAD VII ELITE features ECU Programming working on upmost 30+ car brands: 1) Backup/Restore data from original ECUs, you won't find this in any other tools; 2) Programming offline or online, manual or automatic to meet more needs; 3) R-etrofit, e.g. replace halogen lamp. 4) ECU Upgrade, e.g for Fuel quality defect firmware. Coding features: Recode ECU Data, Personalization, and loads of more.
  • 【LAUNCH X431 PAD VII ELITE, 60+ Services & Topology】 LAUNCH X431 PAD VII ELITE bidirectional scan tool has 60+ service functions, like Oil Reset/ABS Bleeding/Injector Coding… to win more business. Topology mapping checks DTCs and all-system communication status visually in LAUNCH X431 PAD VII ELITE top scanner. The actuation test detects problems 5X faster than tearing autoparts apart. Multiple protocols: J2534, RP1210/D-PDU (for HD cars), Do-IP (BMWs E/F, Land Rover/Jaguar), CANFD (new GM).
  • 【Intelligent Diagnose & Guided Functions】LAUNCH X431 PAD VII ELITE scan tool has Intelligent Diagnose to free you from tedious works: easily get VIN data, guide you to vehicle information page without menu selection, and display all diagnostic records. Guided Function (for V.A.G) allows on-screen prompts for proper diagnostics, simple & convenient. Pin Detection allows detecting DLC pins voltage and accessing protocol types to troubleshoot your DLC port.
Bestseller No. 4
LAUNCH X431 PRO5 Diagnostic Scanner, J2534 Reprogramming Tool with ECU Coding, Upgrade of X431 PRO3/V+, 50+ Service, Intelligent Diagnostics, Guided Functions, CAN FD/DoIP, 2-Year Free Update
  • 👍[New & Outstanding X431 PRO5 Scanner] LAUNCH X431 PRO5 scan tool, upgrade of LAUNCH X431 PRO3 & X431 V+ PRO, configures a SmartBox 3.0 VCI (J2534/DoIP/CAN FD compliant) that performs online programming for BMW & Benz models as OEM level. More powerful features: Online Coding for Porsche/Audi, Heavy-duty Truck Diagnostics, VAG Guided Functions, 50+ Services, etc., bring ease & efficiency. Powerful software even covers online diagnostics for FCA cars & newer model data.
  • [J2534 Programming with Smartbox3.0] If you’re seeking all-in-one solutions for car ECU tuning needs, LAUNCH X431 PRO5 programming tool is ready to work for you. Support online programming for BMW&Benz and hold exclusive programming backup/restoration. Come with a Smartbox 3.0 device of J2534 standard and pair with a PC to download OEM software to upgrade the ECU software, which maximizes the vehicle performance and minimizes diagnostic problems.
  • [ECU Coding Customizes All You Want] With top of the tech instruction and vehicle data, LAUNCH X431 PRO5 diagnostic scanner performs well in ECU Coding and makes everything easier 1) recode adaptive data after ECU replacement 2) personalization/retrofit to improve car comfort: deactivate auto start-stop or change interior lights 3) coding data backup/reserve 4) online coding for BMW/Benz/Porsche/VW/Skoda/Seat 5) online matching/calibration for VW/for Audi, etc.
  • [Huge Vehicle Software Database] LAUNCH scanner PRO5 can be nominated as a powerful troubleshooter for 99% of post 1996-automobiles. Provide abundant exclusive functions for effortless diagnostics: Benz/BMW Data Backup/Restoration; Benz/BMW Manual Mode Programming; Benz SCN Coding/Variant Coding; BMW Coding (with newer data to 2022.03); AutoAuth for FCA SGW(2018 later); Various Online Coding Data for VW/for Audi, etc. 2-Year free updating will keep renewing the data for more vehicles.
  • [AutoAuth Access & 50+ Services] Partnered AutoAuth FCA US, LAUNCH scanner can directly login to the AutoAuth account and secure check (reading DTC, active test, reset functions, etc.) for FCA vehicles. 50+ services that are needed for repair shops have been packed in X431 PRO5 auto scanner, such as Hot functions (Oil Reset, EPB Reset, SAS Reset, ABS Bleeding, etc.) and Comprehensive functions (High Voltage Battery Diagnostics, Transport Mode),
Bestseller No. 5
MUCAR OBD2 Scanner, Car Scanner Diagnostic Tool with 6 Systems (ABS SRS ECM TCM BCM TPMS) and 7 Reset Services (Oil EPB SAS ETS TPMS ABS DF), 5" HD Touchscreen and Update Free Lifetime
  • 【Wifi Upgrade】- After you receive the OBD2 Scanner Diagnostic Tool for better product experience as well as car diagnositic, please connect to wifi/phone hotspot and accept or take the initiative to update APP operating system and car brand diagnostic software.
  • 【Professional 6 System Diagnosis】- This OBD2 scanner has the most commonly system: ABS, SRS, Transmission, Engine, BCM and TPMS. With its professional diagnostic services you will have the ability to read codes and make sure all safety measures are in place. Not only will you receive the code definition, but you will also be able to view possible causes and reported fixes for specific vehicle codes.
  • 【7 Most Useful Reset Services】- You will have 7 additional fixed resets for lifetime free use: Oil/EPB/SAS/ETS/ABS Bleeding/Filte/TPMS. If you have recently changed or installed new equipment on your vehicles such as an ABS module or master cylinder, the ABS bleeding function can help remove air by performing an auto bleed. Moreover, the code reader comes with multiple maintenance features.
  • 【Enhanced OBD2 Functions】- This car scanner can support all 10 OBD2 test modes. Read Codes, Erase Codes, MIL Fault Indicator Light, Live Data, EVAP System Test, On-Board Monitor Test, View Freeze Frame, O2 Sensor Test, Vehicle Info, I/M Readiness, DTC Code Look-up, perform oxygen sensor tests and carbon canister tests to ensure your vehicle is ready for all emission services.
  • 【Large HD Touchscreen and 4 in 1 Live Data Display】- This car diagnostic scanner is equipped with a 5" color HD touchscreen: Compared with other screens, the displayed data and charts will be clearer. It shows live data of each control module by text or graphs, up to 4 parameters can be displayed at the same time.
SaleBestseller No. 6
Thinkdiag OBD2 Scanner Bluetooth, All System Bidirectional scan Tool OE Level Diagnostic Tool with ECU Coding,15+ Service Functions, FCA AutoAuth, All Software 1 Year Free fits for iPhone & Android
  • 【Tips:】 Recommend to contact us via Amazon mesasge to get quick response if you have any issues. Once the device can't be registered please contact us with device SN to get new activation code. When you met the device charge extra fee, please clean the cookies in setting and sign out app, then re-log in all the software will be available for free. Thinkdiag comes with 15 Reset functions one year free. Please connect with WIFI to download thinkdiag Software to save mobile data.
  • 【15+ Maintenance Functions】Thinkcar Thinkdiag Scanner has 15 reset functions menu and more maintenance function under the exact car menu: Oil Reset, ABS Bleeding, Injector coding, SAS Reset, TPMS Reset, BMS Reset, Reset Gearbox, AFS Reset, SUNROOF, Break Reset, Suspension Rest, Elec. Throttle Relearn, SEAT Calibration. Thinkdiag is a professional diagnostic tool for mechanics. ECU coding is not suitable for every car models, please check with us.
  • 【All Vehicle Systems Bluetooth OBD2 Scanner】 Thinkdiag OBD2 Scanner supports all Systems diagnostic function, it can read/clear fault codes, read live data, read control module information, actuation tests and maintenance functions for ECM, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc... It works with most car models after 1996, cover more than 120+ car brands, All software with 1 year free update, much valuable than other scanners in the market.
  • 【Bi-Directional Test + ECU Coding】 Thinkdiag car code reader actuates solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls which saves much time to identify malfunction causes. ECU CODING allows you to match the replaced components with ECU, flash hidden functions for BMW, for GM, for Benz etc. No matter you are private owner or professional technician, Thinkdiag is a powerful and handy scanner in your repair tool list.
  • 【Intelligent Diagnostic Tool with Auto-VIN】Thinkdiag Bluetooth OBD2 scanner makes your smart phone device become a professional vehicle diagnostic tool, it compatible with Android and iOS system. Auto-VIN function supports the Thinkdiag identifies the most car models automatically. Full system Vehicle health report will be automatically created after diagnosis, report can be shared. Live Data Stream combined Graphing+Data Record better for monitoring vehicle performance and analyze the abnormal parameter.
SaleBestseller No. 7
Ballmers MDI2 Multiple Diagnostic Interface Scanner EL-52100-AM GM Multiple Diagnostic Interface 2 Kit WiFi Version with OBD2 USB 2.0 for DLC Cable Plug
  • 【Interchange Part Number】: EL-52100-AM, MDI 2. PLEASE NOTE:Software requirements for operating system: Win XP, Win 7, Win 8. NOT compatible Windows 10. You need to turn off your anti-virus software before installation, otherwise you will not be able to install the software.
  • 【Application】: MDI 2 vehicle communication interface for use on gm vehicles (VCI) with wireless J2534 reprogramming and diagnostics.
  • 【Easy to Use】: Simply connect the host PC computer application to the vehicle and use the MDI 2 scanner for data transfer and Electronic Control Unit ECU reprogramming; quick and effortless for everyday use.
  • 【Packing List】: 1 X MDI 2 device, 1 X DLC Cable, 1 X USB Cable.
  • 【Excellent Maintenance】: Worry-Free Return And Refund Policy, Buy with Confidence! If you have any questions, please contact us with the frame number, and we will provide you with the most correct advice.
Bestseller No. 8
LAUNCH X431 PRO 5 Scan Tool: 2024 J2534 Reprogramming Tool, ECU Online Coding, Topology Mapping, Upgraded of X431 V+, Bi-Directional Diagnostic Scanner, with SmartBox 3.0 CANFD & DOIP, 2 Years Update
  • 【Why Choose LAUNCH scanner X431 PRO5】It is the original LAUNCH X431 scan tool, the 2024 upgraded version of PROS V+, X431 PRO3 and V+ 4.0, which is a worthwhile investment for repair shops and mechanics. LAUNCH X431 PRO 5, all is set to OE-level standards with 1) J2534 ECU Programming & 50+ service same as PAD Series; 2) Bi-directional control + All system diagnostics as Snap-on scanner; 3) Online Coding functions directly connect to OEM server; 4) Top-notch Topology Mapping function
  • 【J2534 Programming with Smart Box 3.0】 What is super SmartBox 3.0 VCI? Worth 1000$, Smart Box 3.0 is backed on new ISO9141/J1850/SAE J2610/CANFD/DOIP, which enables you to run 14x quicker data trans and advanced OEM J2534 reprogramming for B-MW, Ben-z, F-ord, Jaguar, Land Rover, GW, Volvo, etc. (please reach to us for more details). It also serves as a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
  • 【New Released Topology Mapping】Update your X431 PRO 5 to V 7.03.014 to gain Topology Mapping function. This advanced feature, typically found only on tools costing over $3000, provides a comprehensive view of a vehicle's data bus configurations, improving repair efficiency by up to 90%. With just one click, you can gain insights into the layout of a vehicle's system and clear any troubles. Compatibility with your vehicle's brand should be verified by checking the VIN before purchasing.
  • 【LAUNCH X431 PRO 5 with Powerful 50+ Services】Especially designed for pro mechanics and big repair shops, Launch X431 scanner PRO5 is equipped with 50+ hot reset functions for 150 car makes which same as X431 PAD serious. Easy to navigate and help you do ABS Bleeding, TPMS Reset, Oil Reset, EPB Reset, Suspension, BMS, Injector Coding, IMMO, Power balance, Throttle Matching and more. 🚩Notice: we offer 2-year f ree update while other brands generally 1 year.
  • 【A-ctive Test + ECU Coding】Come with appealing bi-directional control to troubleshoot all possible problems for full systems within 5 min.This LAUNCH X431 PRO scanner even develops all practical functions needed by all technicians:1) ECU Coding for replacing, match, relearn, recode new ECU modules;2) Online Coding for B-MW, VW, Porsche, Ben-z to surf OEM data;3) VAG Guided functions ease complex issues;4) Personalization & ADAS improving car performance and driving safety.
Bestseller No. 9
TOPDON ArtiDiag Pro Bidirectional Scan Tool, ECU Coding OBD2 Scanner Diagnostic Tool, 2 Years Free Update(Worth 300)/FCA Autoauth/31+ Services/All System Diagnosis
  • Advanced online ECU coding►►Maximize the capabilities of your vehicles with the ArtiDiag Pro ECU Coding tool. This scan tool, seamlessly compatible with renowned models such as VW, AUDI, SKODA, SEAT, BENZ, and more, empowers you to uncover hidden features, deactivate annoying functions, and code retrofitted components for peak performance. Ensure a backup before coding and steer clear of coding sessions on low battery levels.
  • Efficient Diagnostics with Bidirectional Control►►Say goodbye to uncertainty, streamline diagnostics, and reclaim valuable time with ArtiDiag Pro scan tool. This bidirectional scan tool exceeds expectations, enabling targeted tests on individual actuators to swiftly identify and resolve issues. Covering lights, door locks, fuel and coolant systems, windows, wipers, EVAP, and more in vehicle components.
  • 31+ Services Resolve 90% of Repair Challenges►►Unleash maximum productivity with the ArtiDiag Pro, a scan tool that tackles 90% of maintenance issues through its 31 special functions. Effortlessly clear oil maintenance indicators with oil reset. Engage the EPB Reset for brake system management and establish precise alignment with the Steering Angle Reset to define the straight-line reference position for your vehicle.
  • FCA Autoauth&Full Sets of Adapters►►This diagnostic tool supports Autoauth for FCA SGW, Chrysler, Jeep, Dodge, Fiat etc. 2017 and later. Equipped with the Chrysler 12+8 adapter, the BMW-20 Adapter and Benz BZ-38 Adapter, this scanner saves you the hassle of sourcing adapters separately.
  • Professional Customer Support►►At TOPDON, your satisfaction is our unwavering commitment. Experience hassle-free support and a lifetime of expert assistance. Should you encounter any challenges, reach out to us at 833-629-4832. For returns, please damage the packaging to prevent Amazon from reselling it. Please be advised that after two years, a fee of 249 Bucks will apply for software updates.
Bestseller No. 10
ZMOON ZM301 OBD2 Scanner Diagnostic Tool, Car Code Reader OBDII/EOBD Diagnostic Scan Tool for All Cars After 1996
  • Full OBDII Modes Scanner for Car: A professional car scanner diagnostic tool can help you a lot. Read and clear codes, turn off engine lights or MIL, view freeze frames, read I/M readiness, retrieve vehicle VINs, conduct battery voltage tests, and provide live data streams with graphing displays. With a built-in database of 50,000+ DTCs, it also performs O2 sensor tests, onboard monitoring, and component testing, among other functions.
  • Enhanced Cloud Printing: Combined with real-time data, freeze frame and DTC playback functions, ZM301 can generate QR codes from these data and save them by scanning screenshots with your mobile phone. Simplifying the installation software printing process gives you more convenience and prevents auto repair shops from overcharging, saving you money and time.
  • 50,000+ DTC Lookup: Unlike older models that typically only have 3,000-10,000 DTCs, the ZM301 car code reader is equipped with a database of 50,000+ DTCs. This substantial advantage enables the scanner to better diagnose and resolve vehicle faults, making it an excellent choice for replacing or upgrading existing car scanners.
  • Convenient Shortcut Functions: More shortcut keys for more convenient operation. Equipped with 4 commonly used function shortcut keys, you can check the car's VIN number and view the DTC fault code definition. I/M can quickly retrieve the car's MIL status. PT is performance test, which can help you check the car's acceleration, braking distance and horsepower test.
  • Compatible with 98% of Vehicles: ZM301 OBDII scanner diagnostic tool is compatible with most cars manufactured after 1996 in the USA, 2002 in Europe, and 2008 in Asia. If your car features a 16-pin OBD2 port and was produced within the specified timeline, it is likely compatible. However, please note that it is not compatible with new energy vehicles, hybrid vehicles, or models that do not comply with the OBD2 protocol.

Last update on 2024-06-08 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

1
Share to...