2003 Nissan Maxima

Voluntary Safety Recall Campaign 2001-2003 Nissan Maxima; Front Passenger Air Bag Inflator

by
Classification: Reference: Date:
RS17-045bNTB17-054bJanuary 15, 2020

 

VOLUNTARY SAFETY RECALL CAMPAIGN 

 2001-2003 MAXIMA; FRONT PASSENGER AIR BAG INFLATOR

 

This bulletin has been amended. See AMENDMENT HISTORY on page 26.  Please discard previous versions of this bulletin.

 

CAMPAIGN ID #:R1711 and R1712
NHTSA #:15V-287
APPLIED VEHICLES:2001-2003 Maxima (A33)

 

Check Service COMM or Dealer Business Systems (DBS)  National Service History to confirm campaign eligibility.

 

INTRODUCTION

NissaneBay logo is conducting this Voluntary Safety Recall Campaign on certain specific 2001-2003 Maxima vehicles to replace the front passenger air bag module and inflator. This service will be performed at no charge to customer for parts or labor.

Takata has issued return packaging, shipping labels, documents, and directions that must be used and followed in order to properly carry out this campaign. Takata’s documentation is attached and is part of this bulletin.

 

IDENTIFICATION NUMBER

NissaneBay logo has assigned identification numbers R1711 and R1712 to this campaign.  This number must appear on all communications and documentation of any nature dealing with this campaign.

 

DEALER RESPONSIBILITY

It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory.  Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale.  Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration.  While federal law applies only to new vehicles, NissaneBay logo strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.

 

REPAIR OVERVIEW

Use Service COMM or Dealer Business Systems
(DBS) National Service History to confirm this
campaign applies

↓

Register the new front passenger
air bag inflator and new module

↓

Replace the front passenger
air bag module and inflator

↓

Return the old front passenger air bag inflator

↓

End

 

REQUIRED SPECIAL TOOL (J-51315)

 

REQUIRED SPECIAL TOOL (J-52352)

Quick Scan Tool (J-52352)

 

  • Each retailer has been shipped one Quick Scan Tool (J-52352).

 

  • Additional tools can be obtained from Tech•Mate: nissantechmate.com or  1-800-662-2001.

 

SERVICE PROCEDURE

 

New Inflator and New Module Registration

 

  1. Obtain a new inflator and a new module from your parts department.

 

  • New inflator and new module are listed in the Parts Information.

 

  1. Attach the quick scan tool (J-52352) to your CONSULT PC USB port.

 

  1. On the left side of the ASIST main menu, select Tech Support Info, then Inventory Vehicle Actions.

 

  1. Select CLICK HERE (Air Bag to VIN Registration).

 

Register the New Inflator

 

  1. Use the quick scan tool to scan the bar code (VIN) on the B-pillar label.

 

  • Wipe any dirt/debris from bar code before scanning.

 

NOTE:

  • Some labels may not scan quickly.

 

  • Hold the scan tool approximately 6 inches away from the label.

 

  • Hold the trigger down until the label is read (this may take several seconds).

 

  • VIN will automatically populate (see Figure 5).

 

  • If needed, VIN can be entered manually.

 

  1. Use the quick scan tool to scan the bar code (serial number) on the new inflator shipping box.

 

  • The serial number will automatically populate (see Figure 5 on previous page).

 

NOTE: If needed, the serial number can be entered manually.

 

  1. Select Submit on the ASIST screen (see Figure 5 on the previous page).

 

Register the New Module

 

  1. Use the quick scan tool and scan the bar code (VIN) on the vehicle B-pillar label a second time.

 

NOTE:

 

  • Some labels may not scan quickly.

 

  • Hold the scan tool approximately 6 inches away from the label.

 

  • Hold the trigger down until the label is read (this may take several seconds).               

 

  • If needed, VIN can be entered manually (Figure 8).

 

  1. Open the Module shipping container.

 

  • New module is listed in the Parts Information.

 

  1. Locate the bar code sticker on the new module.

 

      NOTE: The new module will be left in the shipping container until later in this procedure.

 

  1. Use the quick scan tool to scan the bar code (serial number) on the new module (see Figures 9 and 10).

 

  • The serial number will automatically populate (see Figure 8).

 

NOTE: If needed, the serial number can be entered manually.

 

  1. Select Submit on the ASIST screen (see Figure 8 on the previous page).

 

Inflator and Module Replacement

 

IMPORTANT:

  • Follow all cautions, warnings, and notes in the Electronic Service Manual (ESM) when working on or near a Supplemental Restraint System (SRS), such as an air bag.

 

  • To help avoid damage, refer to Instrument Panel Removal Tips starting on the next page.

 

CAUTION: Handle interior trim carefully to avoid damage. Work with clean hands and clean tools to avoid dirt and stains. Use protective covers as needed.

 

  1. Turn the ignition ON.

 

  1. Write down the radio settings.

 

  1. Turn the ignition OFF.

 

  1. Disconnect both battery cables, negative cable first.

 

  1. Wait at least 3 minutes.

 

  1. Remove the passenger air bag module (module) from the vehicle.

 

  • Refer to the appropriate Electronic Service Manual (ESM) for module removal information.

 

IMPORTANT: Follow all cautions, warnings, and notes in the Electronic Service Manual (ESM) when working on or near a Supplemental Restraint System (SRS), such as an air bag.

 

CAUTION: Handle interior trim carefully to avoid damage. Work with clean hands and clean tools to avoid dirt and stains. Use protective covers as needed.

 

  1. Set the module in a clean working area.

 

NOTE: Do not set the module with cover facing down.

 

  1. Securely mount the air bag module support (support) in a vice (see Figure 11).

 

WARNING:

  • Work from behind and to the sides of the support.

 

  • Wear safety glasses while performing inflator replacement.

 

  1. Disconnect the harness clip from the module frame.

 

WARNING: Work from behind and to the sides of the support.

 

  1. Attach the support bracket to the module frame.

 

  • Tighten the bolts holding the bracket to the module frame.

 

  • Use bolts supplied with the support.

 

  • Leave the L brackets on each end slightly loose to allow for positioning of the module in the support.

 

  1. Mount the module in the support.

 

  • Use bolts and nuts supplied with the support.

 

  1. Make sure the module is centered in the support.

 

NOTE: Centering the module in the support will allow access to the inflator securing nuts through the slots in the support.

 

  1. Tighten all of the mounting bolts and nuts that hold the module to the support.

 

  1. Carefully cut a few inches of the yellow corrugated harness cover in the area shown.

 

  • Do not cut the wires inside the corrugated cover.

 

  1. Attach 2 shorting pins to the inflator harness as shown.

 

  • Make sure to pair the wires from each end of the inflator.

 

Blue with White

Red with Yellow

 

  • Use an insulation displacement type wire connector as a shorting pin.

 

  • Refer to the Parts Information for additional connector/shorting pin information.

 

  1. Cut off the connector end of the harness.

 

  1. Remove the 4 nuts from the module that hold the inflator in place (see Figures 19 and 20).

 

  • Use a ratchet and extension.

 

  • Remove the 4 nuts.

 

NOTE: These nuts will not be reused.

 

  1. Remove the inflator stopper.

 

  1. Push the right side of the inflator out of the module.

 

  • Twist the inflator to a position that will allow the connector and harness to fit through the opening.

 

  1. Pull the old inflator completely out of the module from the left side.

 

  1. Set the old inflator in the clean working area making sure it does not roll and fall to the floor.

 

  1. Remove the old module from the support and place it on a clean work surface.

 

  1. Remove the support bracket from the old module.

 

  1. Remove the new module from its shipping container.

 

  • New module is listed in the Parts Information.

 

  1. Remove the instrument panel finisher from the old module, and transfer it to the new module as follows.

 

    1. Set the module on the bench with the mounting holes facing you.

 

    1. Use a plastic trim tool to detach the module hooks on the side facing you.

 

    • Detach one hook at a time.

 

    • Start at one end and then work towards the opposite end.

 

    • Detach all 7 hooks.

 

    1. Remove the old module from the finisher.

 

    • Lift out the side facing you.

 

    • Use a tilt/twist motion to detach the hooks on the other side.

 

NOTE: The old module will not be reused.

 

    1. Install the new module to the finisher.

 

    • Make sure the mounting bolt holes face the side of the finisher with SRS AIRBAG written on it.

 

    • Make sure all of the hooks are attached correctly.

 

NOTE: SRS ARIBAG is written on the front side of the finisher.  

 

  1. Attach the support bracket to the new module frame.

 

  • Use bolts supplied with the support.

 

  1. Slide the paper tube completely out of the module.

 

IMPORTANT: 

  • The new module contains two inflator stopper brackets – one for each side.

 

  • In the following steps, make sure to install the correct stopper bracket on each side of the inflator.

 

  1. Install the right side inflator stopper bracket with nuts finger tight (see Figure 33).

 

  • Make sure to use new nuts.

 

NOTE: New nuts and new stopper bracket are included with the new module.

 

  1. Mount the new module in the support.

 

  • Use bolts and nuts supplied with the support.

 

  1. Make sure the module is centered in the support.

 

NOTE: Centering the module in the support will allow access to the inflator securing nuts through the slots in the support.  

 

  1. Remove the new inflator from the box.

 

IMPORTANT: 

  • The new inflator has a large plastic end cap and a small plastic end cap.

 

  • When installing, pay close attention to which end is installed first.

 

Install the New Inflator into the New Module

 

  1. Slide the new inflator into the module assembly from the left side; large plastic end cap first.

 

  1. On the Right side, make sure the tab on the end of the inflator fits in the stopper bracket as shown.

 

  1. Install the left side inflator stopper bracket and 2 inflator securing nuts finger tight (see Figure 38).

 

  • Make sure to use new nuts.

 

NOTE: Stopper bracket and new nuts are included with the new module.

 

  1. Make sure the inflator is pushed all the way into its housing – no gap on the right side (see Figure 39).

 

  1. Make sure there is no gap between the inflator stopper and the inflator on the left side (see Figure 39).

 

  1. Torque the 4 inflator securing nuts.

 

  • Torque nuts to:

3.9 Nm (0.39 kg-m, 34 in-lb).

 

  • Torque nuts in the order shown.

 

IMPORTANT:

  • In the next step you will be attaching the new harness to the new inflator.

 

  • Once an inflator connector is attached to the inflator, it cannot be disconnected.

 

  • Make sure to attach the connectors to the correct ends of the inflator (see Figure 41). 

 

    • Left / Right orientation is as shown in Figure 41.

 

  1. Attach the new harness to each end of the inflator.

 

  • Remove the dust proof stickers covering the ends of the inflator.

 

  • A new harness is included with the new module.

 

  • Make sure to attach the correct ends (see Figure 41 on the previous page).

 

  • Refer to Figures 42, 43, and 44.

 

  • Make sure the T shape at the inflator end aligns with the T shape of the connector.

 

 

  • Make sure the inflator connectors are fully engaged / seated (see Figure 44).

 

  1. Remove the module from the support and set it on the clean working area.

 

  1. Remove the support bracket from the module frame.

 

  1. Attach the harness clip to the module frame.

 

  1. Route/attach the harness to the harness guides.

 

  1. Reinstall the module into the vehicle in reverse order of removal.

 

  • Make sure to use the new “one time use” module mounting bolts included with the new module.

 

  1. Re-connect both battery cables – positive cable first.

 

  1. Reset the clock and the radio settings.

 

  1. Turn the ignition ON and observe the air bag warning light:

 

  • Light should illuminate for 7 seconds and then go out.

 

NOTE: If the Air Bag Warning light does not operate as described above there may be an issue not covered by this campaign. Refer to ASIST and the appropriate ESM for additional diagnostic and repair information.

 

  1. Return the removed (old / non-deployed) inflator in the box that the new inflator arrived in.

  

  • Follow the return instructions provided by Takata.

 

  • Return instructions provided by Takata are attached to this bulletin on page 27.

 

PARTS INFORMATION

DESCRIPTION PART # QUANTITY
INFLATOR-AIR BAG (Inflator)98561-7999E1
MODULE KIT-SUB

(Includes module mounting bolts, inflator harness, inflator securing nuts, and stopper brackets)

K8525-4Y90C1
Shorting Pin

(Insulation Displacement Connector for 22-18 gauge wire)

NAPA item # 784566

Grainger Item # 4YT50

or equivalent available from local auto supply

2

 

NOTE: 

  • Make sure to return the removed (old / non-deployed) inflator in the box that the new inflator came in.
  •  Follow the return instructions provided by Takata.
  • Takata supplied return instructions are attached to this bulletin on page 27.

 

CLAIMS INFORMATION

Submit a “CM” line claim using the following claims coding:

 

Maxima

CAMPAIGN  (“CM”) I.D. DESCRIPTION OP CODE FRT
R1711Remove and replace front passenger air bag sub-module and inflatorR171121.0 hrs.
CAMPAIGN  (“CM”) I.D. DESCRIPTION OP CODE FRT
R1712Remove and replace front passenger air bag sub-module and inflatorR171231.0 hrs.

 

EXPENSE CODE

CODE DESCRIPTION MAXIMUM AMOUNT
041Shorting Pin

(Insulation Displacement Connector for 22-18 gauge wire)

$0.50

 

AMENDMENT HISTORY

PUBLISHED DATE REFERENCE DESCRIPTION
July 19, 2017NTB17-054Original bulletin published
March 27, 2018NTB17-054aChanges made throughout
January 15, 2020NTB17-054bCLAIMS INFORMATION revised and Campaign ID # added

 

Takata Document

 

Remedy Instructions and TSB

RCRIT-20V008-0377.pdf 1914.892KB


⬇ Download PDF (1.83 MB)

 

 

SaleBestseller No. 1
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission, Check Engine Code Reader for Cars and Trucks, Diagnostic Scan Tool with SRS Airbag, Automotive Diagnostic Tool with Live Data
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission, Check Engine Code Reader for Cars and Trucks, Diagnostic Scan Tool with SRS Airbag, Automotive Diagnostic Tool with Live Data
  • [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
  • [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
  • [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
  • [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
  • [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
$169.99 −$34.03 $135.96
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 2
OBDMATE OBD2 Scanner with ABS SRS Transmission, Reset Fault Lights | Check Engine Code Reader with Full OBDII Functions | DLC Pin Test | Battery Voltage Check, Car Diagnostic Tool
OBDMATE OBD2 Scanner with ABS SRS Transmission, Reset Fault Lights | Check Engine Code Reader with Full OBDII Functions | DLC Pin Test | Battery Voltage Check, Car Diagnostic Tool
  • 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
  • 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
  • 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
  • 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by monitoring current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
  • 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
$139.99 −$30.00 $109.99
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 3
BlueDriver Pro Next Gen OBD2 Scanner – No Subscription, Bluetooth Car Code Reader for iPhone & Android – Diagnose 8000+ Issues, ABS SRS TPMS, Repair Reports, Vehicles 1996+
BlueDriver Pro Next Gen OBD2 Scanner – No Subscription, Bluetooth Car Code Reader for iPhone & Android – Diagnose 8000+ Issues, ABS SRS TPMS, Repair Reports, Vehicles 1996+
  • [Diagnose Like a Pro] BlueDriver Pro Next-Gen is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
  • [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission, and more on supported vehicles, including expanded coverage on newer model years.
  • [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
  • [Expanded Make & Model Coverage] Optimized for today’s vehicles with strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, NissaneBay logo, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW. Enhanced communication on select 2024+ NissaneBay logo and Mazda models (see compatibility chart).
  • [Gas Vehicles 1996+ & Select Light-Duty Trucks] Works with all gas-powered vehicles made in 1996 or newer, plus select light-duty trucks and diesels, including F-250, RAM 2500, Silverado, and Sierra. Built for daily drivers, family vehicles, and real-world truck use.
$129.95 −$35.00 $94.95
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 4
FOXWELL NT614 Elite OBD2 Scanner for DIY Mechanics, Upgrade of NT604, 4 System Diagnostic Tool with 5 Resets (ABS Bleeding, EPB, Oil, SAS, Throttle), Read/Clear Engine/ABS/SRS/Transmission Fault Codes
FOXWELL NT614 Elite OBD2 Scanner for DIY Mechanics, Upgrade of NT604, 4 System Diagnostic Tool with 5 Resets (ABS Bleeding, EPB, Oil, SAS, Throttle), Read/Clear Engine/ABS/SRS/Transmission Fault Codes
  • PAID FOR ITSELF ON FIRST USE - SAVE ON EVERY DIAGNOSIS: Avoid expensive shop fees and take control of vehicle repairs at home. The NT614 Elite delivers professional-level diagnostics for Engine, ABS, SRS Airbag, and Transmission systems, helping you quickly identify the real cause of warning lights and avoid unnecessary repairs. With 5 essential service resets including Oil Reset, EPB, ABS Bleeding, SAS Calibration, and Throttle Relearn, you can complete everyday maintenance and repairs without paying dealership visit. Features WiFi updates, no registration required, and plug-and-play setup with no extra power cord
  • 5 ESSENTIAL RESETS FOR REAL DIY MAINTENANCE: More than just a diagnostic tool, the NT614 Elite gives you the service functions DIYers actually need to avoid expensive shop visits. Perform Oil Reset, EPB brake service, ABS bleeding, steering angle calibration, and throttle relearn to fix common maintenance issues at home with confidence. Reset warning lights, replace brake pads, restore throttle performance, and complete essential maintenance without paying dealership labor costs. Note: Function availability varies by vehicle make, model, year, engine type, and system configuration. Please confirm compatibility before purchase.
  • SAME 4-SYSTEM DIAGNOSTICS AS NT604: Built on the trusted NT604, the NT614 Elite delivers full diagnostics for Engine, ABS, SRS Airbag, and Transmission systems-helping you identify the root cause behind warning lights instead of guessing. Read and clear codes, view live data graphs, monitor engine temperature, wheel speed sensors, transmission temperature, and more for accurate troubleshooting at home
  • LIVE DATA GRAPHING - FIND PROBLEMS BEFORE THEY GET EXPENSIVE: See what basic scanners miss with real-time data displayed in easy-to-read graphs. Monitor fuel trims, oxygen sensors, engine load, RPM, battery voltage, and transmission temperature to detect intermittent or hidden problems before they become costly repairs. Diagnose faster and make smarter repair decisions with visual data insights
  • AUTO VIN + LIFETIME WI-FI UPDATES + WIDE COVERAGE: AutoVIN instantly identifies your vehicle for faster setup and fewer errors. Generate professional vehicle health reports for maintenance tracking, used car inspections, or sharing with mechanics. Stay updated with lifetime free Wi-Fi updates-no subscriptions or hidden fees. Supports 90+ brands and 10,000+ models including Ford, Toyota, BMW, Mercedes-Benz, Honda, NissaneBay logo, Volkswagen, Hyundai, Subaru, and more for long-term reliable use
$189.99 −$34.00 $155.99 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 5
BLCKTEC 460T OBD2 Scanner Car Code Reader Engine ABS SRS Transmission Diagnostic Tool, 12 Reset Services, Oil/TPMS/EPB/BMS/SAS/DPF/Throttle Reset, ABS Bleeding, Battery Test, Auto VIN, Free Update
BLCKTEC 460T OBD2 Scanner Car Code Reader Engine ABS SRS Transmission Diagnostic Tool, 12 Reset Services, Oil/TPMS/EPB/BMS/SAS/DPF/Throttle Reset, ABS Bleeding, Battery Test, Auto VIN, Free Update
  • [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
  • [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
  • [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
  • [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
  • [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
$249.99 −$50.00 $199.99
Buy on Amazon Price incl. tax, excl. shipping

Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API

 

This product presentation was made with AAWP plugin.

BufferCopyFlipboardHacker NewsLinkedInMessengerMixPinterestPrintRedditSMSTelegramTumblrVKWhatsAppLineXing

Leave a Comment

Share to...
BufferCopyFlipboardHacker NewsLineLinkedInMessengerMixPinterestPrintRedditSMSTelegramTumblrVKWhatsAppXing