October 4, 2021 NHTSA CAMPAIGN NUMBER: 21V774000
HPCM Software May Cause Loss of Drive Power
A loss of drive power increases the risk of a crash.
NHTSA Campaign Number: 21V774
Manufacturer Nissan
North America, Inc.
Components ENGINE AND ENGINE COOLING, HYBRID PROPULSION SYSTEM
Potential Number of Units Affected 7,634
Summary
Nissan North America, Inc. (Nissan) is recalling certain 2014-2015 Nissan Pathfinder Hybrid, 2015-2016 Murano Hybrid, and 2014-2017 INFINITI QX60 Hybrid vehicles. The Hybrid Powertrain Control Module (HPCM) software may shut down the hybrid system and the engine under certain conditions, causing a loss of drive power.
Remedy
Dealers will reprogram the HPCM software, free of charge. Owner notification letters were mailed March 31, 2022. Owners may contact Nissan customer service at 1-800-867-7669 or INFINITI customer service at 1-800-662-6200. Nissan’s numbers for this recall are R21B4 and R21B5.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Nissan has a Recall
Hybrid Powertrain Control Module (HPCM) Reprogram
Voluntary Safety Recall Campaign
Reference: R21B5
Date: February 23, 2022
| Affected Models/Years: | Affected Population: | Dealer Inventory: | SERVICE COMM Activation date: | Stop Sale In Effect |
| MY2014-2015 Pathfinder Hybrid (R52H) | 2,845 | NA | October 5, 2021 |
YES |
| MY2015-2016 Murano Hybrid (Z52H) | 614 |
***** Campaign Summary *****
Nissan is issuing a Voluntary Safety Recall Campaign on specific 2014-2015 Pathfinder Hybrid and 2015-2016 Murano Hybrid vehicles identified in Service Comm to reprogram the Hybrid Powertrain Control Module (HPCM) with updated software to enable Electric Vehicle (EV) only operation in the event of failsafe mode activation.
The Hybrid Powertrain Control Module (HPCM) on certain Nissan Murano and Pathfinder hybrid vehicles may contain software that could cause an engine stall under certain conditions. In the event of bearing damage, the HPCM detects the overheat condition and initiates failsafe mode, which cuts drive power to both the engine and electric motor. Without drivetrain power, the customer may experience an engine stall while driving, increasing the risk of a crash.
Affected vehicles are subject to stop sale.
***** Release Schedule *****
Parts
- Updated Engine Control Module (ECM) software is now available on ASIST.
- No other parts are required for this campaign.
-
- Additional coverage is available in the event the ECM fails during reprogramming.
-
-
- Dealers should contact the Warranty Claims Call Center (800-2587008, option 7) for additional information.
-
Special Tools
CONSULT III+
Repair
Owner Notification
- Nissan sent owners of all potentially affected vehicles an interim notification letter in December 2021, via U.S. Mail.
- Nissan will begin sending owner notification letters to all potentially affected vehicles inviting them to have the remedy completed in March 2022 via U.S. Mail.
Frequently Asked Questions (FAQ):
Q. Is this a recall?
Yes.
Q. Is this a Stop Sale?
Yes.
Q. What is the reason for the recall?
The Hybrid Powertrain Control Module (HCPM) on certain Nissan Murano and Pathfinder hybrid vehicles may contain software that could cause an engine stall under certain conditions.
Q. What is the possible effect of the condition?
In the event of bearing damage, the Hybrid Powertrain Control Module (HPCM) detects the overheat condition and initiates failsafe mode, which cuts drive power to both the engine and electric motor. Without drivetrain power, the customer may experience an engine stall while driving, increasing the risk of a crash.
Q. What will be the corrective action for this voluntary recall campaign?
Dealers will reprogram the Engine Control Module (ECM) with updated software to enable Electric (EV) only operation in the event of failsafe mode activation.
Q. How long will the corrective action take?
This service, which is conducted at no charge to you for parts and labor, could take up to one (1) hour to complete. However, your Nissan dealer may require your vehicle for a longer period of time based upon their work schedule.
Q. When will vehicle owners be notified?
Nissan sent owners of all potentially affected vehicles an interim notification letter in December 2021, via U.S. Mail.
Q. Is my vehicle safe to drive?
If your vehicle is subject to this campaign, you will receive an Owner Notification letter from Nissan, which will provide instructions on how to remedy your vehicle. Affected owners are encouraged to have their vehicles repaired as soon as possible.
Q. Is there anything owners can do to mitigate this condition?
No.
Q. Are parts readily available?
The remedy is reprogramming, no other parts are required for this campaign.
Q. Is there any charge for this service?
No. The remedy, once available, will be performed for the customer free of charge for parts and labor.
Q. Will a rental vehicle be provided while the dealer is servicing the vehicle?
Please consult your dealer for alternate transportation availability while the repair procedure is unavailable. Rental is included under the campaign, upon customer request, until remedy is available.
| EXPENSE CODE | DESCRIPTION | AMOUNT |
| 502 | Rental Expense | $1560 (Max) |
| Contact the Warranty claims call center 1-800-258-7008 Option 7, if additional expense is required. Please refer to the Goodwill Rental Guidelines in the APRM for detailed information regarding application of rental reimbursement. | ||
Q. Will I have to take my vehicle back to the selling dealer to have the service performed?
No any authorized Nissan dealer is able to perform the recall campaign.
For Consumer Affairs: Please inform us of the dealer where you would lil<e to have the corrective action completed.
Q. I have lost confidence in the vehicle. Will Nissan replace or repurchase the vehicle?
The remedy will fully correct this condition. As the condition will be corrected, there is no basis for repurchasing or replacing your vehicle.
Q. What model year vehicles are involved?
Certain Model Year 2014-2015 Nissan Pathfinder Hybrid vehicles manufactured from July 18, 2013 to June 21, 2014 at the Smyrna, TN plant and certain Model Year 2015-2016 Nissan Murano Hybrid vehicles manufactured from August 22, 2014 to July 19, 2016 at the Canton, MS plant are affected.
Q. Are you experiencing this condition on any other Nissan (or INFINITI) models?
Yes. Certain Model Year 2014-2017 INFINITI QX60 Hybrid vehicles manufactured from July 18, 2013 to August 4, 2017 at the Smyrna, TN plant are affected.
Chronology of Principal Events:
March 2021 – Nissan became aware of reports of engine stall and power shutdown in the China market involving the subject vehicles.
April 2021 through July 2021 – Nissan focused its investigation on the motor and continuously variable transmission operation, in addition to the failsafe mode activation of the hybrid powertrain control module (HPCM). As part of the investigation, Nissan initiated a parts collection activity in China.
The analysis revealed that the HPCM failsafe mode might potentially disable drive power to the engine and electric motor in the event of bearing damage.
August 2021 to September 2021 – Nissan performed a safety assessment of the failsafe mode to evaluate the potential conditions that could result from a power shutdown of the hybrid powertrain. If both the engine and electric motor are disabled, a stall condition may occur. This failsafe mode condition also reduces power steering assist and braking assist.
In addition, Nissan conducted a warranty review to determine any incidents in markets outside of China. Nissan identified thirty-five (35) claims related to the subject condition in the U.S. market.
September 27, 2021 – Based on the foregoing, Nissan decided to conduct a safety recall campaign to remedy potentially affected vehicles.
DEFECT INFORMATION REPORT
Manufacturer:
Nissan North America Inc., Canton plant
Nissan North America Inc., Smyrna plant
Vehicles Potentially Involved:
Production period of affected vehicles involved:
| Model | Dates of Manufacture |
| MY 2015-2016 Nissan Murano Hybrid | August 22, 2014 (SOP) to July 19, 2016 (EOP) |
| MY 2014-2015 Nissan Pathfinder Hybrid | July 18, 2013 (SOP) to June 21, 2014 (EOP) |
| MY 2014-2017 INFINITI QX60 Hybrid | July 18, 2013 (SOP) to August 4, 2017 (EOP) |
This issue only affects models equipped with the hybrid powertrain produced at the Canton and Smyrna plants. The defect (described in Section 5 below) is unique to these models and dates of manufacture; no other Nissan or INFINITI vehicles are affected.
The name, description and part number of the subject component is below:
| Part Name | Part Description | Part Number(s) |
| Hybrid Power Control
Unit Module | HPCM Module | 237A1 3JV9B
237A1 3JV9C |
| HPCM Software Program Version | HPCM Software | Ver. Ph5.421
Ver. Ph5.801 Ver. Ph5.831 Ver. Ph5.841 |
The software supplier for the subject vehicles:
Hitachi Astemo, Ltd.
8th Floor, Minatomirai Grand Central Tower 4-6-2 Minato Mirai
Nishi-ku, Yokohama-shi, Kanagawa, 220-0012 Japan
Mr. Keishiro Kihira, Product Sales Group
+81 70-3985-0801
[email protected]
Total Number of Vehicles Potentially Involved:
Approximately 7,634 vehicles are potentially affected:
| Make/Model | Number of Vehicles |
| MY 2015-2016 Nissan Murano Hybrid | 614 |
| MY 2014-2015 Nissan Pathfinder Hybrid | 2,845 |
| MY 2014-2017 INFINITI QX60 Hybrid | 4,175 |
Percentage of Vehicles Estimated to Actually Contain the Defect:
0.42%
1% is used here because submission within NHTSA’s safety portal will not allow a value under 1%.
Description of the Defect:
The Hybrid Powertrain Control Module (HPCM) on certain Nissan Murano Hybrid, Pathfinder Hybrid and INFINITI QX60 Hybrid vehicles may contain software that can cause an engine stall under certain conditions. In the event of bearing damage, the HPCM detects the overheat condition and initiates failsafe mode, which cuts drive power to both the engine and electric motor. Without drivetrain power, the customer may experience an engine stall while driving, increasing the risk of a crash.
Chronology of Principal Events:
March 2021 – Nissan became aware of reports of engine stall and power shutdown in the China market involving the subject vehicles.
April 2021 through July 2021 – Nissan focused its investigation on the motor and continuously variable transmission operation, in addition to the failsafe mode activation of the hybrid powertrain control module (HPCM). As part of the investigation, Nissan initiated a parts collection activity in China.
The analysis revealed that the HPCM failsafe mode might potentially disable drive power to the engine and electric motor in the event of bearing damage.
August 2021 to September 2021 – Nissan performed a safety assessment of the failsafe mode to evaluate the potential conditions that could result from a power shutdown of the hybrid powertrain. If both the engine and electric motor are disabled, a stall condition may occur. This failsafe mode condition also reduces power steering assist and braking assist.
In addition, Nissan conducted a warranty review to determine any incidents in markets outside of China. Nissan identified thirty-five (35) claims related to the subject condition in the U.S. market.
September 27, 2021 – Based on the foregoing, Nissan decided to conduct a safety recall campaign to remedy potentially affected vehicles.
Description of Corrective Action:
Nissan will notify all owners of potentially affected vehicles beginning December 3, 2021. Dealers were notified October 5, 2021. Dealers will reprogram the HPCM with updated software to enable EV only operation in the event of failsafe mode activation.
Nissan will not include a statement in the Part 577 owner notification concerning reimbursement for the cost of obtaining a pre-notification remedy since the repair is a reprogram.
Copy of Notices:
Copies of all notices will be provided to NHTSA as they become available.
2016 Nissan Murano Hybrid & 2014-2015 Pathfinder Hybrid Powertrain Control Module Reprogram
2014-2015 Nissan Pathfinder Hybrid & 2015-2016 Murano Hybrid HPCM Software May Cause Loss of Drive Power
8 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| INFINITI | QX60 HYBRID | 2014-2017 |
| NISSAN | MURANO HYBRID | 2015-2016 |
| NISSAN | PATHFINDER HYBRID | 2014-2015 |
17 Associated Documents
Defect Notice 573 Report
RCLRPT-21V774-1411.PDF 215.917KB
October 4, 2021 DEFECT INFORMATION REPORT
RMISC-21V774-4979.pdf 117.077KB
Recall Acknowledgement
RCAK-21V774-6899.pdf 820.166KB
Manufacturer Notices(to Dealers,etc) – Nissan REVISION 1 R21B5 2014-16 Pathfinder HEV_Murano HEV HPCM Reprogram – Dealer Announcement
RCMN-21V774-7025.pdf 152.565KB
Manufacturer Notices(to Dealers,etc) – INFINITI CAMPAIGN BULLETIN Hybrid Powertrain Control Module (HPCM) Reprogram Voluntary Recall Campaign Reference:R21B4 Date: December 9, 2021
RCMN-21V774-6625.pdf 147.592KB
Nissan November 24, 2021 DEFECT INFORMATION REPORT
RMISC-21V774-6510.pdf 117.713KB
Manufacturer Notices(to Dealers,etc) – INFINITI R21B4 2014-17 QX60 Hybrid HPCM Reprogram – Retailer Announcement
RCMN-21V774-4639.pdf 319.807KB
Manufacturer Notices(to Dealers,etc) – Nissan R21B5 2014-15 Pathfinder HEV 2015-16 Murano HEV HPCM Reprogram – Dealer Announcement
RCMN-21V774-5042.pdf 1036.533KB
Recall 573 Report: November 24, 2021
RCLRPT-21V774-5314.PDF 216.046KB
Interim Owner Notification Letter(Part 577)
RIONL-21V774-6194.pdf 72.567KB
Manufacturer Notices(to Dealers,etc) – INFINITI CAMPAIGN BULLETIN Hybrid Powertrain Control Module (HPCM) Reprogram Voluntary Recall Campaign Reference:R21B4 Date: February 23, 2022
RCMN-21V774-0967.pdf 157.332KB
Manufacturer Notices(to Dealers,etc) – Nissan REVISION 2 R21B5 2014-16 Pathfinder HEV_Murano HEV HPCM Reprogram – Dealer Announcement
RCMN-21V774-2965.pdf 173.917KB
Remedy Instructions and TSB
RCRIT-21V774-4154.pdf 6796.611KB
Remedy Instructions and TSB
RCRIT-21V774-7077.pdf 6413.454KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V774-8939.pdf 340.431KB
ISSUED Owner Notification Letter(Part 577) – Spanish
RCONL-21V774-4306.pdf 305.37KB
Recall Quarterly Report #1, 2022-1
RCLQRT-21V774-0919.PDF 211.152KB
Latest Recalls Documents
Reprogramming
J2534-1 Re/Programming
Tutorial for Purchasing NERS Software
Software updated April 26, 2019 to version # 04.03.00. It is recommended the latest version of NERS be installed before connecting to a vehicle.
This NERS software supports reprogrammable Engine and Transmission control units from 1999 to 2019 model year vehicles, and 2005 MY and later VIN writing into ECUs, when using a Nissan validated pass-through device. Click the Reprogramming Tab for additional information on reprogramming. This software only provides ECU reprogramming, blank programming and VIN writing capability. It does not provide diagnostic or key programming capability. For Engine and Transmission control unit reprogramming and VIN writing capability on 2020 MY & newer, please use CONSULT-III plus or CONSULT-III plus R2R software.
Vehicle reprogramming requires the use of the following:
- Nissan validated J2534-1 device
- Nissan ECU Reprogramming Software (NERS)
- Personal computer running Windows XP (SP2 or later) or Windows 7 or 10 64Bit
- Applicable reprogram file
Nissan tested and validated the below listed devices. Nissan does not recommend the use of any other J2534-1 device not listed here.
| Manufacturer | Models |
| Actia | PassThru +XS |
| Autel | MaxiFlash Elite (with firmware v3.01) |
| Bosch | Mastertech VCI (SFP v5.11.9) |
| Dearborn Group | VSI-2534 |
| Drew Technologies/OPUS IVS | CarDAQ Plus, CarDAQ M, Mongoose ISO/CAN |
| Hella Gutmann Solutions | Mega Macs 42 SE (DT VCI), Mega Macs 66 (DT66) |
| Texa | TEXA Navigator TXTs Series |
Click the below link to purchase NERS diagnostic software.
Download Purchased ECU Data File(s)
Once you have purchased ECU data file(s) and your order is completed, your ECU files can be downloaded. Please verify that you are logged in to your account before proceeding.
Purchase of ECU data enables file download access for a period of 24 hours, after which time the file will no longer appear in your list of purchased data files. Be sure to download all data files immediately following your purchase.
When you purchase a J-2534 reprogramming file, you will get a zip file containing a data file (.dat, .pdx, .xcal, .7z), a .csv or .xml file and a Reprog_readme.pdf. Please review the readme file for information on where to place the files in your PC.
Please Note that J2534-1 supports reprogramming on 1999 MY and later vehicles.
How to find the proper J-2534 Reprogramming ECU file:
In order for you to locate the proper ECU file, you will need to look up the applicable Technical Services Bulletin(TSB) for your vehicle. Instructions in the TSB will pinpoint and advise you of the ECU part # to enter below.
Download Purchased ECU Data File(s)
Once you have purchased ECU data file(s) and your order is completed, your ECU files can be downloaded. Please verify that you are logged in to your account before proceeding.
Purchase of ECU data enables file download access for a period of 24 hours, after which time the file will not longer appear in your list of purchased data files. Be sure to download all data files immediately following your purchase.
Special Note: Nissan and Infiniti vehicle uses a high level of security when Re/programming or Configuration is performed to the vehicle ECUs. With the release of NERS software version 04.00.01 or greater, technicians will be required to login with their Nissan or Infiniti Techinfo website user ID and password to perform Re/programming and Configuration in NERS.
Login Instruction Guide
September 2013, Nissan and Infiniti began the phase in of “Blank” Service Parts ECUs and TCMs. Depending upon the model and model year, replacement modules come WITHOUT software. When a replacement module is installed in an applicable vehicle for any reason, it will need to be programmed.
When you purchase a J-2534 Blank programming file, you will get a zip file containing a data file (.dat, .pdx, .xcal, .7z), a .csv or .xml file and a Reprog_readme.pdf. Please review the readme file for information on where to place the files in your PC.
How to find the proper J-2534 Blank Programming ECU file:
- Obtain the blank ECU part number when you purchase the replacement ECU. Nissan’s and Infiniti’s parts catalog provides both the blank ECU part number and the ROM-DATA ID part number (after programming part number) to be used. Enter this blank ECU part number in the field below.
or
- Using C-III plus software, retrieve the blank ECU part number from the new ECU. Enter this blank ECU part number in the field below.
Please note: Take care after making your selection that the listed vehicle information matches the vehicle you are programming.
- Special Note: NERS Version 03.08 or higher supports Blank RWD, 5 speed TCM programming.
Download Purchased ECU Data File(s)
Once you have purchased ECU data file(s) and your order is completed, your ECU files can be downloaded. Please verify that you are logged in to your account before proceeding.
Purchase of ECU data enables file download access for a period of 24 hours, after which time the file will not longer appear in your list of purchased data files. Be sure to download all data files immediately following your purchase.
Special Note: Nissan and Infiniti vehicle uses a high level of security when Re/programming or Configuration is performed to the vehicle ECUs. With the release of NERS software version 04.00.01 or greater, technicians will be required to login with their Nissan or Infiniti Techinfo website user ID and password to perform Re/programming and Configuration in NERS.
Login Instruction Guide
www.nissan-techinfo.com
- Advanced VCI Box, Industry-leading J2534 Pass-Thru Technology: This J2534 Pass-Thru Programmer is designed espically for technicians, independent shop owners, and DIY enthusiasts, enables fast, reliable computer-based programming. It supports all J2534 protocols—including the latest DoIP and CAN FD—ensuring full compatibility with both legacy and next-generation vehicles.
- High-Speed OEM-Level Diagnostics & Programming: Unlock true OEM functionality with comprehensive system diagnostics, guided troubleshooting, coding, adaptations, resets, and programming—all designed to slash repair time. This all-in-one tool eliminates the need for multiple OEM devices, boosting efficiency and cutting costs. Equipped with High-Speed USB, it delivers 10x more data per second than competing solutions
- Coverage for 17 Car Brands & Ultra Reliability: Works seamlessly for Chrysler, for Ford(Forscan), for GM, for Nissan, for Toyota, for Honda, for Subaru(SSM4), for Land Rover/Jaguar, for Volvo, for Wuling, for Volkswagen, for Mercedes-Benz, and for BMW. Backed by over 10000 real vehicle tests and benefit from a wealth of practical experience, this OEM reprogramming tool guarantees stable and exceptional performance
- User-Friendly RLink Platform & Expert Support: TOPDON’s proprietary driver management platform offers a clean interface and lifetime free updates. Access a rich library of real-world case studies to stay ahead of the curve. Backed by a support team with 10+ years of J2534 and automotive repair experience, we provide one-on-one assistance to resolve any technical issue.
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J2534 diagnostic tool features a 6.6ft USB 2.0 Cable and a 1.2 ft OBDII Extension Cable, allows to connection your computer easily outside the vehicle. The included handled carry case offers easy portability, storage, and hanging options—keeping your gear clean and ready to go, anywhere.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- 💯【Conta.ct us for Support Directly】For any issues experienced after purchase, please reach out to: 📞autelsupply@ outlook. com🛣️. Our team will provide perfect solution for you. For tech support or [explore additional accessory], please cont.act our team: 📞autelsupply@ outlook. com🛣️.
- 🌎【Autel J2534 Pass-Thru Progra.mmer】As an OEM Pass-Thru Progra.mmer Vehicle interface for multiple makes, Autel MaxiFlash J2534 support all J2534 protocols, D-PDU, CAN-FD and DoIP protocols. 2026 newer Autel MaxiFlash J2534 VCI can works with P-C and download OEM vehicle software, seamlessly conduct OE-level diagnostic-progra.mming-c0ding. Also, Work with Elite II Pro/ Ultra Lite/ MS909/ MS909CV/ MS909EV to directly pro.gram on Merce.des-Be.nz & BM.W. Autel J2534 Progr.ammer is a multi-functional device and supports 10+ major brands, including for Hond.a, G.M, LandRo.ver, BM.W, Chrysl.er, For.d, Hyun.dai, Ki.a, Merc.edes B.enz, Toyot.a, Volksw.agen etc.
- 🌎【Enhanced Protocol: J2534/D-PDU/RP1210/CAN FD/DoIP】Autel MaxiFlash JVCI is a blueto.oth communicate device, it supports latest CAN FD DoIP CAN protocols, compliant with automotive D-PDU/ J2534/ RP1210 standards. It can perform standard PassThru J2534 functions: compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar Land Rover IDS and BM.W 3G for OEM diagnostics. CAN FD protocol is mainly for GM 2019+, DoIP protocol is mainly for Volvo 2018+, for L-and Rover/for Jaguar 2017+, for BM.W F chassis and G chassis.
- 🌎【Compatible with P-C/ WIND.OWS 】The Autel J2534 VCI can be connected to a compu.ter via a data cable; once the corresponding OEM software is installed, it enables do advanced progr.amming and c0ding on your vehicles. Easy Steps: 1) Connect to P-C via a USB cable 2) download OEM vehicle software 3) Start Diagnose. Take For.d for example, you can download OEM software on mot.orcraft.erservi.ce website, such as: For.d Diagnostic Software downloads, As B.uilt Data, Updated Cali.bration information, then use different software do relevant features.
- 🌎【Work with Autel Elite II Pro/ Ultra Lite/ MS909/ MS909CV/ MS909EV】This 2026 latest Autel J2534 Pass-Thru VCI is 100% compatible with Autel Elite II Pro Ultra Lite MS909 MS909CV MS909EV to perform advanced functions from diagnose to progra.mming.
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, Subaru, & VW/Audi.
- Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
- [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
- [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Mercedes-Benz and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
- [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
- [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
- [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land Rover/Jaguar, BMW F/G chassis, GM, etc.; 2) FCA Autoauth, covering 2018+ Chrysler/Dodge/Fiat, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
November 24, 2021 Mr. Jeff Giuseppe Associate Administrator for Enforcement National Highway Traffic Safety Administration Attn: Recall Management Division (NVS-215) Room W48-302 1200 New Jersey Avenue, SE Washington, D.C. 20590 Dear Mr. Giuseppe: We are transmitting the enclosed supplement to the Defect Information Report filed on October 26, 2021. This supplement updates section(s) 2 and 7: Vehicles Potentially Involved and Description of Corrective Action, respectively. Very truly, Derek Latta Manager, Technical Compliance Encl. Nissan North America, Inc. One Nissan Way Franklin, TN 37067 Mailing Address: PO Box 685001 Franklin, TN 37068 DEFECT INFORMATION REPORT 1. Manufacturer: Nissan North America Inc., Canton plant Nissan North America Inc., Smyrna plant 2. Vehicles Potentially Involved: Production period of affected vehicles involved: Model Dates of Manufacture MY 2015-2016 Nissan Murano Hybrid August 22, 2014 (SOP) to July 19, 2016 (EOP) MY 2014-2015 Nissan Pathfinder Hybrid July 18, 2013 (SOP) to June 21, 2014 (EOP) MY 2014-2017 INFINITI QX60 Hybrid July 18, 2013 (SOP) to August 4, 2017 (EOP) This issue only affects models equipped with the hybrid powertrain produced at the Canton and Smyrna plants. The defect (described in Section 5 below) is unique to these models and dates of manufacture; no other Nissan or INFINITI vehicles are affected. The name, description and part number of the subject component is below: Part Name Part Description Part Number(s) Hybrid Power Control Unit Module HPCM Module 237A1 3JV9B 237A1 3JV9C HPCM Software Program Version HPCM Software Ver. Ph5.421 Ver. Ph5.801 Ver. Ph5.831 Ver. Ph5.841 The software supplier for the subject vehicles: Hitachi Astemo, Ltd. 8th Floor, Minatomirai Grand Central Tower 4-6-2 Minato Mirai Nishi-ku, Yokohama-shi, Kanagawa, 220-0012 Japan Mr. Keishiro Kihira, Product Sales Group +81 70-3985-0801 [email protected] 3. Total Number of Vehicles Potentially Involved: Approximately 7,634 vehicles are potentially affected: Make/Model Number of Vehicles MY 2015-2016 Nissan Murano Hybrid 614 MY 2014-2015 Nissan Pathfinder Hybrid 2,845 MY 2014-2017 INFINITI QX60 Hybrid 4,175 4. Percentage of Vehicles Estimated to Actually Contain the Defect: 0.42% 1% is used here because submission within NHTSA’s safety portal will not allow a value under 1%. 5. Description of the Defect: The Hybrid Powertrain Control Module (HPCM) on certain Nissan Murano Hybrid, Pathfinder Hybrid and INFINITI QX60 Hybrid vehicles may contain software that can cause an engine stall under certain conditions. In the event of bearing damage, the HPCM detects the overheat condition and initiates failsafe mode, which cuts drive power to both the engine and electric motor. Without drivetrain power, the customer may experience an engine stall while driving, increasing the risk of a crash. 6. Chronology of Principal Events: March 2021 – Nissan became aware of reports of engine stall and power shutdown in the China market involving the subject vehicles. April 2021 through July 2021 – Nissan focused its investigation on the motor and continuously variable transmission operation, in addition to the failsafe mode activation of the hybrid powertrain control module (HPCM). As part of the investigation, Nissan initiated a parts collection activity in China. The analysis revealed that the HPCM failsafe mode might potentially disable drive power to the engine and electric motor in the event of bearing damage. August 2021 to September 2021 – Nissan performed a safety assessment of the failsafe mode to evaluate the potential conditions that could result from a power shutdown of the hybrid powertrain. If both the engine and electric motor are disabled, a stall condition may occur. This failsafe mode condition also reduces power steering assist and braking assist. In addition, Nissan conducted a warranty review to determine any incidents in markets outside of China. Nissan identified thirty-five (35) claims related to the subject condition in the U.S. market. September 27, 2021 – Based on the foregoing, Nissan decided to conduct a safety recall campaign to remedy potentially affected vehicles. 7. Description of Corrective Action: Nissan will notify all owners of potentially affected vehicles beginning December 3, 2021. Dealers were notified October 5, 2021. Dealers will reprogram the HPCM with updated software to enable EV only operation in the event of failsafe mode activation. Nissan will not include a statement in the Part 577 owner notification concerning reimbursement for the cost of obtaining a pre-notification remedy since the repair is a reprogram. 8. Copy of Notices: Copies of all notices will be provided to NHTSA as they become available.
**************************************************************************************************************
INTERIM OWNER NOTIFICATION NHTSA Recall 21V-774 NOTIFICACIÓN PROVISIONAL AL PROPIETARIO Dear Nissan Murano Hybrid Owner: This interim notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Nissan has decided that a defect which relates to motor vehicle safety exists in certain 2015 Model Year Nissan Murano Hybrid vehicles. Our records indicate that you own or lease the Nissan vehicle identified by the VIN on the inside of this notice. Reason for Recall Motivo del Retiro The Hybrid Powertrain Control Module (HCPM) on your Murano Hybrid vehicle may contain software that could cause an engine stall under certain conditions. In the event of bearing damage, the HPCM detects the overheat condition and initiates failsafe mode, which cuts drive power to both the engine and electric motor. Without drivetrain power, you may experience an engine stall while driving, increasing the risk of a crash. What Nissan Will Do Qué Hará Nissan The software is currently being developed by Nissan to remedy your vehicle. The remedy for this recall is anticipated to be available in March 2022. When the remedy is available, Nissan will send you a second letter asking you to bring your vehicle to a dealer to have the HPCM reprogrammed with updated software, at no cost to you. What You Should Do Qué Debes Hacer For more information about the recall, please visit https://nna.secure.force.com/recall?camp=R21B5. Para obtener más información sobre el retiro, visite https://nna.secure.force.com/recall?camp=R21B5. If the dealer fails to, or is unable to make the necessary repairs free of charge, you may contact the National Consumer Affairs Department, Nissan North America, Inc. P.O. Box 685003, Franklin, TN 37068-5003. The toll free number is 1-800-867-7669. Si el concesionario no cumple, o no le es posible realizar las reparaciones necesarias sin cargos, puedes contactar al Departamento Nacional de Asuntos del Consumidor a: National Consumer Affairs Department, Nissan North America, Inc. P.O. Box 685003, Franklin, TN 37068-5003. El número libre de cargos es 1-800-867-7669. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. Thank you for your cooperation. We appreciate your Nissan ownership and apologize for any inconvenience this may cause you. Gracias por tu cooperación. Agradecemos tu patrocinio como dueño de un Nissan y te ofrecemos nuestras disculpas por cualquier inconveniente que esto pueda ocasionar.
**************************************************************************************************************
FINAL – Murano Pathfinder Hybrid HPCM Recall Invitation to Repair owner letter – R21B5 OWNER NOTIFICATION NHTSA Recall 21V-774 NOTIFICACIÓN PROPIETARIO Dear Nissan [Murano Pathfinder] Hybrid Owner: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Nissan has decided that a defect which relates to motor vehicle safety exists in certain [2014 2015 2016] Model Year Nissan [Murano Pathfinder] Hybrid vehicles. Our records indicate that you own or lease the Nissan vehicle identified by the VIN on the inside of this notice. Reason for Recall Motivo del Retiro The Hybrid Powertrain Control Module (HCPM) on your [Murano Pathfinder] Hybrid vehicle may contain software that could cause an engine stall under certain conditions. In the event of bearing damage, the HPCM detects the overheat condition and initiates failsafe mode, which cuts drive power to both the engine and electric motor. Without drivetrain power, you may experience an engine stall while driving, increasing the risk of a crash. What Nissan Will Do Qué Hará Nissan Software is now available to repair your vehicle. Your Nissan dealer will reprogram the HPCM with updated software to enable EV only operation in the event of failsafe mode activation, at no cost for labor. This free service should take less than an hour to complete. However, your Nissan dealer may require your vehicle for a longer period of time based upon their work schedule What You Should Do Qué Debes Hacer Please contact your Nissan dealer in order to arrange an appointment to have your vehicle repaired as soon as possible. Please bring this notice with you when you keep your service appointment. Por favor, póngase en contacto con su concesionario Nissan para concertar una cita para reparar su vehículo lo antes posible. Se requiere que traigas esta notificación el día de tu cita. For more information about the recall, please visit https://nna.secure.force.com/recall?camp=R21B5. Para obtener más información sobre el retiro, visite https://nna.secure.force.com/recall?camp=R21B5. If the dealer fails to, or is unable to make the necessary repairs free of charge, you may contact the National Consumer Affairs Department, Nissan North America, Inc. P.O. Box 685003, Franklin, TN 37068-5003. The toll free number is 1- 800-867-7669. Si el concesionario no cumple, o no le es posible realizar las reparaciones necesarias sin cargos, puedes contactar al Departamento Nacional de Asuntos del Consumidor a: National Consumer Affairs Department, Nissan North America, Inc. P.O. Box 685003, Franklin, TN 37068-5003. El número libre de cargos es 1-800-867-7669. FINAL – Murano Pathfinder Hybrid HPCM Recall Invitation to Repair owner letter – R21B5 If you have previously paid for repairs related to this issue, you may be eligible for reimbursement of the related expenses. For questions or more information please visit https://nissanassist.com. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800- 424-9153); or go to http://www.safercar.gov. Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. Thank you for your cooperation. We appreciate your Nissan ownership and apologize for any inconvenience this may cause you. Gracias por tu cooperación. Agradecemos tu patrocinio como dueño de un Nissan y te ofrecemos nuestras disculpas por cualquier inconveniente que esto pueda ocasionar.
SEOCONTENT-END
This product presentation was made with AAWP plugin.