R21B9 – Electrical Connector Under Dash May Corrode – 2014-2016 Nissan Rogue

“This site contains affiliate links for which OEMDTC may be compensated”

January 21, 2022 NHTSA CAMPAIGN NUMBER: 22V024000

Electrical Connector Under Dash May Corrode

Corrosion in the electrical connector can result in power window/seat failure, all-wheel-drive warning light illumination, battery drainage, and electrical connector damage that increases the risk of a fire.

 

NHTSA Campaign Number: 22V024

Manufacturer Nissan North America, Inc.

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 688,946

 

Summary

Nissan North America, Inc. (Nissan) is recalling certain 2014-2016 Rogue vehicles. The electrical connector for the under dash harness may corrode due to water and salt intrusion from the driver’s side foot well.

 

Remedy

Dealers will remove the harness tape and harness covering and replace both connectors and apply white lithium grease to the connectors as necessary, free of charge. Owner notification letters were mailed September 23, 2022. Owners may contact Nissan customer service at 1-800-867-7669. Nissan’s number for this recall is R21B9.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Nissan has a Recall

 


Dash Side Harness
Voluntary Safety Recall Campaign

Reference: R21B9
Date: November 15, 2022

 

IMPORTANT:  It is a violation of Federal law for dealers to sell or deliver vehicles in their inventory covered by this notification until the campaign action is performed. 

 

Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale  In Effect
MY2014-2016 Rogue (T32) 621,709 NA January 25, 2022 YES

 

***** Campaign Summary *****

Nissan is committed to the safety and security of our customers and their passengers. Nissan has notified the National Highway Traffic Safety Administration (NHTSA) that it is recalling certain MY14-16 Nissan Rogue vehicles in the USA to address a dash side harness connector corrosion concern.

In affected vehicles, if water and salt collect in the driver’s side foot well, it may wick up the dash side harness tape and enter the connector.  If this occurs, the dash side harness connector may corrode.  If the connector becomes corroded, electrical current may continue to flow between the connector terminals, potentially causing issues such as driver’s power window or power seat inoperative, All-Wheel Drive (AWD) warning light ON, battery discharge, and/or thermal damage to the connector.  In rare cases, the corrosion could potentially lead to a fire, which may increase risk of injury.

If the customer observes driver’s power window or power seat inoperative, All-Wheel Drive (AWD) warning light illuminated, battery discharge, or if the customer detects any burning odor or smoke, Nissan recommends parking the vehicle outside and contacting Nissan Roadside Assistance (1-800-647-7261 option 1) to have the vehicle towed to an authorized Nissan service department as soon as possible.

 

***** IMPORTANT ***** 

If there is a delay between when the vehicle arrives at the dealer and the repair, park the vehicle outside away from any structures and other vehicles, retrieve any diagnostic trouble codes and attach the print out to the repair order for this vehicle, then DISCONNECT the 12-volt battery until the vehicle can be repaired.

 

***** Release Schedule *****

Parts

The parts restriction will be removed on all parts and dealers will be able to order, as needed, via normal ordering process beginning November 22, 2022.

Part Number Description Quantity 
240R2-6RR0A Kit- Engine Room Harness

(US Built Vehicle, 11th character of VIN is C)

1
240R2-6RR0B Kit- Engine Room Harness

(Korean Built Vehicle, 11th character of VIN is P)

1
60918-6RR0A Grease Tube As Needed

NOTE:  Parts replaced under this campaign activity may be collected. It is important for dealers to return parts applicable specifically to the VIN and repair order identified.

 

Special Tools

  • Flameless Heat Gun (J-46538)
  • Crimpling Pliers (J-48817-8)
  • Terminal Release Tool (J-48817-1)

 

Repair

Nissan mailed interim notification letters to owners of affected vehicles in March 2022, via U.S. Mail.

Nissan will begin sending invitation to repair notifications to owners of potentially affected MY14-16 Rogue vehicles in September 2022, via U.S. Mail.

 


Frequently Asked Questions (FAQ):

 

Is this a safety recall?

Yes.

 

Is this a Stop Sale?

Yes.

 

What is the reason for the voluntary safety recall?

In affected MY14-16 Rogue vehicles, if water and salt collect in the driver’s side foot well, it may wick up the dash side harness tape and enter the connector. If this occurs, the dash side harness connector may corrode.

 

What is the possible effect of the condition?

If the connector becomes corroded, electrical current may continue to flow between the connector terminals, potentially causing the driver’s power seat or power window to become inoperative, All-Wheel Drive (AWD) warning light illumination, battery discharge, and/or thermal damage to the connector. In rare cases, the corrosion could potentially lead to a fire.

 

What will be the corrective action for this voluntary safety recall campaign?

On MY14-16 Rogue vehicles the dealer will inspect the main harness and body harness connectors for evidence of corrosion. If there is corrosion present, the dealer will replace both wire harness connectors. Nissan is continuing to develop the remedy for all other VINs included in this campaign.

 

How long will the corrective action take?

This service, which is conducted at no charge to you for parts and labor, could take up to two (2) hours to complete. However, your Nissan dealer may require your vehicle for a longer period of time based upon their work schedule.

 

When will vehicle owners be notified?

Nissan sent interim notification letters to owners of affected vehicles in March 2022, via U.S. Mail.

Nissan will begin sending invitation to repair notifications to owners of potentially affected MY14-16 Rogue vehicles in September 2022 via U.S. Mail.

 

Are parts readily available?

Yes. The parts restriction will be removed on all parts and dealers will be able to order, as needed, via normal ordering process beginning November 22, 2022.

 

Can the customer identify this issue?

In some instances, the customer may experience one or more of the following conditions:

  • Driver’s power window or inoperative
  • Driver’s power seat inoperative
  • All-Wheel Drive (AWD) warning light illuminated
  • Battery discharge
  • A burning odor
  • Smoke under the driver side dash

If any of these conditions are experienced, Nissan recommends parking the vehicle outside and contacting Nissan Roadside Assistance (1-800-647-7261 option 1) to have the vehicle towed to an authorized Nissan dealer as soon as possible.

 

Can affected customers continue to drive their vehicle?

If the customer observes driver’s power window or power seat inoperative, All-Wheel Drive (AWD) warning light illuminated, battery discharge, or if the customer detects any burning odor or smoke, Nissan recommends parking the vehicle outside and contacting Nissan Roadside Assistance to have the vehicle towed to an authorized Nissan dealer as soon as possible.

 

Is there any charge for this service?

No, the remedy will be performed for the customer free of charge for parts and labor.

 

Will a rental vehicle be provided while the dealer is servicing the vehicle?

Please consult your dealer for alternate transportation availability while your vehicle is being serviced. Rental is available upon customer request until repair is available.

EXPENSE CODE DESCRIPTION AMOUNT
502 Rental Expense $1,680 (Max)
Contact the Warranty claims call center 1-800-258-7008 Option 7, if additional expense is required. Please refer to the Goodwill Rental Guidelines in the APRM for detailed information regarding application of rental reimbursement.

 

Is towing covered for vehicles outside of warranty that are no longer eligible for Nissan Roadside Assistance?

Yes, the campaign will cover the towing costs for affected vehicles that are no longer eligible for Roadside Assistance (out of warranty) and are experiencing one or more of the applicable conditions:

EXPENSE CODE DESCRIPTION AMOUNT
501 Towing $100 (Max)
Contact the Warranty claims call center 1-800-258-7008 Option 7, if additional expense is required.

 

Will I have to take my vehicle back to the selling dealer to have the service performed?

No, any authorized Nissan dealer is able to perform the recall campaign.

For Consumer Affairs: Please inform us of the dealer where you would like to have the corrective action completed.

 

I have lost confidence in the vehicle. Will Nissan replace or repurchase the vehicle?

The remedy, will fully correct this condition. As the condition will be corrected, there is no basis for repurchasing or replacing your vehicle.

 

What model year vehicles are involved?

Certain Nissan Rogue vehicles manufactured from July 25, 2013 to December 31, 2016 are included in this campaign.

 

I do not own a MY14-16 Nissan Rogue but I received an Interim Owner Letter, is my vehicle involved in this campaign?

Nissan is continuing to develop the remedy plan for these Rogue vehicles. Nissan will notify you once the remedy is available, anticipated in fall 2022.

 

Are you experiencing this condition on any other Nissan (or INFINITI) models?

No.

 


Voluntary Safety Recall Campaign 2014-2016 Nissan Rogue; Wire Harness Connector Corrosion

 

Voluntary Safety Recall Campaign 2014-2016 Nissan Rogue; Wire Harness Connector Corrosion

 


Dash Side Harness Inspection
Voluntary Safety Recall Campaign

Reference: PC918
Date: September 29, 2022

 

IMPORTANT:  It is a violation of Federal law for dealers to sell or deliver vehicles in their inventory covered by this notification until the campaign action is performed.

Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale  In Effect
MY2017 Rogue (T32) 43,070 NA September 29, 2022 YES

 

***** Campaign Summary *****

Nissan is committed to the safety and security of our customers and their passengers. Nissan previously notified the National Highway Traffic Safety Administration (NHTSA) that it is recalling certain MY2014-16 Nissan Rogue vehicles in the USA to address a potential dash side harness connector corrosion concern related to moisture wicking up the harness tape (campaign ID R21B9).

The R21B9 recall population inadvertently included certain MY2017 Nissan Rogue vehicles.  After consultation with NHTSA, Nissan has prepared an inspection procedure and moved the affected MY17 VINs to new Campaign ID PC918.  Nissan will invite affected MY17 Rogue owners to bring their vehicle into the dealer for inspection to confirm the harness tape condition.

Owners of the MY2017 Nissan Rogue vehicles which were erroneously included with the R21B9 recall will receive an invitation to repair owner letter beginning on October 19, 2022. The letter will instruct owners to bring their vehicle into a Nissan dealer for inspection, where the dealer will inspect the vehicle to confirm the harness tape condition.

 

CAMPAIGN ID: PC918

***** Release Schedule ***** 

 

Repair

  • NTB22-086

 

Owner Notification

Nissan will begin sending invitation to repair notification letters to owners of affected vehicles on October 19, 2022, via U.S. Mail.

 

***** Dealer Responsibility *****

It is the dealer’s responsibility to check Service Comm or DBS National Service History using the appropriate Campaign I.D. for the campaign status on each vehicle falling within the range of this voluntary safety recall campaign, which for any reason enters the service department.  This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in new vehicle inventory.  If a VIN subject to this recall campaign was part of a dealer trade, the letter associated with that VIN should be forwarded to the appropriate dealer for service completion.

 


Frequently Asked Questions (FAQ):

 

Is this a safety recall?

Yes.

 

Is this a Stop Sale?

Yes.

 

What is the reason for the voluntary safety recall?

Certain MY2017 Rogue vehicles were inadvertently included in the MY14-16 Nissan Rogue recall (NHTSA ID 22V024). Nissan will invite affected owners to bring their vehicle into the dealer for inspection and confirmation of the harness tape condition.

 

What is the possible effect of the condition?

In affected MY14-16 Rogue vehicles, if water and salt collect in the driver’s side foot well, it may wick up the dash side harness tape and enter the connector. If this occurs, the dash side harness connector may corrode and possibly cause issues such as driver’s power window or power seat inoperative, AWD warning light ON, battery discharge, and/or thermal damage to the connector.  In rare cases, a fire could potentially occur, increasing the risk of injury.

 

What will be the corrective action for this voluntary safety recall campaign?

The dealer will inspect and confirm the harness tape condition.

 

How long will the corrective action take?

This free service could take up to one (1.0) hour to complete but your Nissan dealer may require your vehicle for a longer period of time based upon their work schedule.

 

When will vehicle owners be notified?

Nissan will begin sending invitation to repair notification letters to owners of affected vehicles on October 19, 2022, via U.S. Mail.

 

Are parts readily available?

Yes.

 

Can the customer identify this issue?

No.

 

Can affected customers continue to drive their vehicle?

Yes.

 

Is there any charge for this service?

No. The remedy will be performed for the customer free of charge.

 

Will a rental vehicle be provided while the dealer is servicing the vehicle?

Please consult your dealer for alternate transportation availability while your vehicle is being serviced. Rental is available upon customer request, until repair is available.

EXPENSE CODE DESCRIPTION AMOUNT
502 Rental Expense $156 (Max)
Contact the Warranty claims call center 1-800-258-7008 Option 7, if additional expense is required. Please refer to the Goodwill Rental Guidelines in the APRM for detailed information regarding application of rental reimbursement.

 

Will I have to take my vehicle back to the selling dealer to have the service performed?

No, any authorized Nissan dealer is able to perform the recall campaign.

For Consumer Affairs: Please inform us of the dealer where you would like to have the corrective action completed.

 

I have lost confidence in the vehicle. Will Nissan replace or repurchase the vehicle?

The remedy will fully correct this condition. As the condition will be corrected, there is no basis for repurchasing or replacing your vehicle.

 

What model year vehicles are involved?

Certain Model Year 2017 Nissan Rogue vehicles manufactured from August 31, 2016 to December 31, 2016 at the Renault plant.

 

Are you experiencing this condition on any other Nissan (or INFINITI) models?

Certain MY14-16 Nissan Rogue vehicles are subject to NHTSA Recall 22V-024.

 


Voluntary Safety Recall Campaign 2017 Nissan Rogue; Wire Harness Inspection

 

Voluntary Safety Recall Campaign 2017 Nissan Rogue; Wire Harness Inspection

 


DEFECT INFORMATION REPORT

Manufacturer:

Nissan North America, Inc., Smyrna Plant
Renault Samsung Motors (RSM) Co., Ltd.

 

Vehicles Potentially Involved:

Certain Model Year 2014-2016 Nissan Rogue vehicles as shown in the table below:

Model Dates of Manufacture Plant
MY 2014-2016 Nissan Rogue July 22, 2014 to September 28, 2016 Renault
MY 2014-2016 Nissan Rogue  July 25, 2013 to September 27, 2016 Smyrna

Based on production records, this issue is unique to these models and dates of manufacture listed above.  Nissan Rogue vehicles manufactured after this date are unaffected because a change was made after MY 2016 at each of the plants to remove the harness tape.  No other Nissan or INFINITI vehicles are affected because the harness layout and tape used are specific to the Nissan Rogue.

The name, description and part number of the subject components are below:

 

Smryna Left Body Harness Part Numbers

Part Name Part Description Part Number(s)
HARNESS-BODY Dash Side Harness 24017-4BA0A
HARNESS-BODY Dash Side Harness 24017-4BA0B
HARNESS-BODY Dash Side Harness 24017-4BA0C
HARNESS-BODY Dash Side Harness 24017-4BA0D
HARNESS-BODY Dash Side Harness 24017-4BA0E
HARNESS-BODY Dash Side Harness 24017-6FL0B
HARNESS-BODY Dash Side Harness 24017-6FL1A
HARNESS-BODY Dash Side Harness 24017-6FL1B
HARNESS-BODY Dash Side Harness 24017-6FL1C
HARNESS-BODY Dash Side Harness 24017-6FL1D
HARNESS-BODY Dash Side Harness 24017-6FL2B
HARNESS-BODY Dash Side Harness 24017-6FL2D
HARNESS-BODY Dash Side Harness 24017-7FA7A
HARNESS-BODY Dash Side Harness 24017-7FA7B
HARNESS-BODY Dash Side Harness 24017-7FA7C
HARNESS-BODY Dash Side Harness 24017-7FA7D
HARNESS-BODY Dash Side Harness 24017-7FA8D
HARNESS-BODY Dash Side Harness 24017-9TA0E
HARNESS-BODY Dash Side Harness 24017-9TA5E
HARNESS-BODY Dash Side Harness 24017-9TB0C
HARNESS-BODY Dash Side Harness 24017-9TB0D
HARNESS-BODY Dash Side Harness 24017-9TB0E
HARNESS-BODY Dash Side Harness 24017-9TB6A
HARNESS-BODY Dash Side Harness 24017-9TB6B
HARNESS-BODY Dash Side Harness 24017-9TB6C
HARNESS-BODY Dash Side Harness 24017-9TB6D
HARNESS-BODY Dash Side Harness 24017-9TB7E

 

RSM Left Body Harness Part Numbers

HARNESS-BODY Dash Side Harness 24017-5HA0A
HARNESS-BODY Dash Side Harness 24017-5HA0C
HARNESS-BODY Dash Side Harness 24017-5HA1A
HARNESS-BODY Dash Side Harness 24017-5HA1B
HARNESS-BODY Dash Side Harness 24017-5HA1C
HARNESS-BODY Dash Side Harness 24017-5HA1D
HARNESS-BODY Dash Side Harness 24017-5HA2A
HARNESS-BODY Dash Side Harness 24017-5HA2B
HARNESS-BODY Dash Side Harness 24017-5HA3A
HARNESS-BODY Dash Side Harness 24017-5HJ0A
HARNESS-BODY Dash Side Harness 24017-5HJ0B
HARNESS-BODY Dash Side Harness 24017-5HJ0C
HARNESS-BODY Dash Side Harness 24017-5HJ0D
HARNESS-BODY Dash Side Harness 24017-5HJ1A
HARNESS-BODY Dash Side Harness 24017-5HJ1B

 

Total Number of Vehicles Potentially Involved:

Approximately 664,779 Nissan Rogue vehicles may be affected.

Model Volume of Production Plant
MY 2014-2016 Nissan Rogue  281,053 Renault
MY 2014-2016 Nissan Rogue 383,726 Smyrna

 

Percentage of Vehicles Estimated to Actually Contain the Defect:

Approximately 0.01%.

 

Description of the Defect:

In affected vehicles, if water and salt collect in the driver’s side foot well, it may wick up the dash side harness tape and enter the connector.  If this occurs, the dash side harness connector may corrode and possibly cause issues such as driver’s power window or power seat inoperative, AWD warning light ON, battery discharge, and/or thermal damage to the connector.  In rare cases, a fire could potentially occur, increasing the risk of injury.

 

Chronology of Principal Events:

March 2017, Nissan received a report of a MY2015 Rogue located in Canada that experienced localized deformation of the harness connector in the driver’s side foot well.  Nissan conducted an investigation of the subject vehicle, but could not assess all aspects of the subject vehicle because the damaged area was previously disassembled by the dealer.   As a result, Nissan was unable to identify the root cause of the incident.

In July 2018, Nissan received a field report related to harness connector damage located in the driver’s side kick panel area of a MY2018 Rogue.  The body and main harness were sent to the supplier for investigation into the root cause of the customer concern. Nissan and the supplier conducted an investigation and determined that the connector had experienced water infiltration. However, the actual root cause was undetermined in this case.

On December 13, 2019, Nissan received an Information Request (2019-3211) from Transport Canada concerning a thermal event on a MY2014 Nissan Rogue that could be related to harness corrosion.  Nissan responded to the Transport Canada Information Request (2019-3211) on January 30, 2020, provided the requested information and continued discussions over the following months.

July 2020 through January 2021 – Transport Canada elevated the Information Request to a Preliminary Evaluation (3280-11-39) on July 28, 2020.  During this time period, Nissan held several discussions with Transport Canada about the details of its investigation related to connector harness concerns and alleged thermal events in Canadian market.  Nissan provided a formal response to the Preliminary Evaluation on January 21, 2021.

February 2021 through August 2021 – Nissan received an additional information request related to the Preliminary Evaluation (3280-11-39) and responded to Transport Canada on April 9, 2021, stating that its investigation determined that damage to the connector does not occur in normal operating conditions.  Nissan initiated an in-use vehicle inspection activity in Canada to collect more harnesses for analysis.  During this time, Nissan provided ongoing feedback to Transport Canada.

September 2021 through December 2021 – Nissan initiated a parts collection activity in the U.S. market in order to further study whether corrosion of the connector was a concern on Rogue vehicles in the U.S.   Nissan concluded its inuse vehicle inspection activity in Canada in November 2021 and provided the results of their survey to Transport Canada the following month.  Nissan confirmed two (2) thermal incidents and two (2) incidents with localized thermal damage to the connector in the Canadian market.  After discussion with Transport Canada, Nissan reconsidered the information internally.

January 13, 2022 – Nissan decided to conduct a Voluntary Safety Recall in Canada and the U.S. out of an abundance of caution.

Nissan is aware of three (3) unconfirmed incidents in the U.S. that may relate to the subject condition.  There are no injuries in the U.S. related to the subject condition.

September 28, 2022 – Upon further review of the VIN file, Nissan determined two errors within the VIN file for vehicles manufactured at the Renault plant:

Approximately 24,167 VINs contained a sequencing error that made the VINs invalid. Nissan corrected the error, which resulted in removal of 24, 167 invalid VINs from the Renault plant population.

Approximately 43,070 Model Year 2017 VINs were inadvertently included in the VIN file. MY 2017 Rogue vehicles are not subject to this condition because the harness tape and harness covering were no longer used in production.  Therefore, they should not be included in the recall population.  However, since these owners received an interim letter prior to discovery of the file error, Nissan will notify these owners with a final invitation to repair letter and advise them to bring their vehicles into the dealer for inspection and confirmation that the production countermeasure was applied.

Nissan has implemented a process for reviewing future VIN files to prevent this type of issue from reoccurring.

 

Description of Corrective Action:

Dealers were notified beginning January 25, 2022.  Owners of all potentially affected vehicles received an interim notification beginning on March 2, 2022 and ending on March 16, 2022.  An updated dealer announcement was provided to dealers on August 26, 2022 informing them of the population change.

Owners of all MY2014-16 potentially affected vehicles received a final invitation to repair notification beginning on September 23, 2022. The letter instructed owners to bring their vehicle into a Nissan dealer for inspection, where the dealer will perform one of the following repairs:

If corrosion is present on either of the connectors, the dealer will remove the harness tape and harness covering, replace both connectors and apply white lithium grease to the connectors.

If corrosion is not present on either of the connectors, the dealer will remove the harness tape and harness covering and apply white lithium grease to the connectors.

Owners of the MY2017 vehicles which were erroneously included in the recall VIN file will receive an invitation to repair owner letter beginning on October 19, 2022. The letter will instruct owners to bring their vehicle into a Nissan dealer for inspection, where the dealer will inspect the vehicle to confirm that the production countermeasure has been applied.

Nissan will include a statement in the Part 577 owner notification concerning reimbursement for the cost of obtaining a pre-notification remedy because the subject vehicles are no longer under warranty.

 

Copy of Notices:

Copies of all notices will be provided to NHTSA as they become available.

 


3 Affected Products

Vehicle

MAKE MODEL YEAR
NISSAN ROGUE 2014-2016

 


18 Associated Documents

Recall Acknowledgement

RCAK-22V024-1224.pdf 645.352KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.23 KB]

 


January 21, 2022 DEFECT INFORMATION REPORT

RMISC-22V024-8768.pdf 58.056KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [56.70 KB]

 


Defect Notice 573 Report

RCLRPT-22V024-6166.PDF 216.649KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.57 KB]

 


Manufacturer Notices(to Dealers,etc) – Nissan R21B9 2014-16 Rogue Dash Side Harness – VSRC – Dealer Announcement

RCMN-22V024-1667.pdf 1235.46KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.18 MB]

 


ISSUED Interim Owner Notification Letter(Part 577)

RIONL-22V024-5861.pdf 143.595KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [140.23 KB]

 


July 14, 2022 AMENDMENT DEFECT INFORMATION REPORT

RMISC-22V024-9609.pdf 75.737KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [73.96 KB]

 


Recall 573 Report – July 15, 2022

RCLRPT-22V024-3229.PDF 216.723KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.64 KB]

 


Nissan – Dealer Announcement – July 2022

RCMN-22V024-3347.pdf 151.906KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [148.35 KB]

 


Recall 573 Report-Amendment 2 – 08/25/2022

RCLRPT-22V024-8270.PDF 216.752KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.67 KB]

 


Remedy Instructions and TSB

RCRIT-22V024-7750.pdf 4476.529KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [4.27 MB]

 


Nissan – Dealer Announcement – August 2022

RCMN-22V024-2796.pdf 162.147KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [158.35 KB]

 


September 28, 2022 DEFECT INFORMATION REPORT

RMISC-22V024-1786.pdf 74.043KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [72.31 KB]

 


Recall 573 Report-Amendment 3 – 09/28/2022

RCLRPT-22V024-6814.PDF 220.015KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [214.86 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V024-6939.pdf 115.056KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [112.36 KB]

 


Remedy Instructions and TSB

RCRIT-22V024-6541.pdf 457.044KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [446.33 KB]

 


Nissan – Campaign Bulletin – September 2022

RCMN-22V024-0414.pdf 139.607KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [136.33 KB]

 


-Manufacturer Notices(to Dealers,etc) – Nissan CAMPAIGN BULLETIN Dash Side Harness Voluntary Safety Recall Campaign Reference: R21B9 Date: November 15, 2022 UPDATE

RCMN-22V024-4653.pdf 163.049KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [159.23 KB]

 


Recall Quarterly Report #1, 2022-3

RCLQRT-22V024-0357.PDF 211.146KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.20 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V024&docType=RCL

 


 

SaleBestseller No. 1
WD-40 Specialist Contact Cleaner Spray, 11 oz.
  • WD-40 Specialist Contact Cleaner is ideal for removing oil, dirt, flux residue, and condensation from sensitive electrical equipment. This quick drying, residue-free formula is safe on metal and plastic
  • Cleans sensitive electric equipment. Quick drying. Safe to use on most plastics 1, rubbers and metals. 1 Test on plastic before using, and avoid adhesives, device screens, and keyboards
  • WD-40 Specialist offers easy solutions for specific problems. WD-40 Specialist line is designed with industrial strength quality for your tough jobs
  • Blast away oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment with pinpoint precision. It's ideal for use on printed circuit boards, controls, switches, precision instruments and electric panels
  • WD-40 Brand believes in creating high-quality products that will not fail in extreme conditions. Professionals rely on WD-40 Specialist to get the job done right
SaleBestseller No. 2
CRC 05103 QD Electronic Cleaner -11 Wt Oz
  • QD ELECTRONICS CLEANER: A precise cleaner made from petroleum distillate and alcohol that is fast evaporating and leaves no residue.
  • FORMULA: With quick-drying, plastic safe, residue-free features, this cleaner is ideal for even the most sensitive electronics and will help to prevent contact failure.
  • APPLICATIONS: QD Electronic Cleaner is ideal for use on computer components, circuit breakers, circuits, coin mechanisms, contacts, flux removal, sockets, lighting, plastics, nylon, plugs, relay switches, PVC, and more!
  • PRODUCT SPECIFICATIONS: QD Electronic Cleaner is available in a 11 wt. oz. aerosol can.
  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment.
Bestseller No. 3
Camrusic 3Pcs Diamond Grip Terminal Cleaner Set, Electrical Terminal Cleaner for Small Electrical Spade Pin Connector
  • Premium Quality:High-quality clean flat terminals and paddle-shaped terminals. The three-piece set is suitable for the most common electrical connectors. Suitable for male and female connectors. Used to clean small electric spade pin connectors.
  • High Performance:The terminal cleaner set is made of high-quality metal materials, which have high hardness, rust and wear resistance, and are not easy to deform or break. High-quality products provide you with quality assurance and a longer service life.
  • Easy To Use: High quality, strong stability, high quality, electrical connector tweezer can be used directly,which is a wonderful tool for daily cleaning.
  • Useful Tool: The car terminal cleaning kit is designed to provide maximum efficiency for your daily maintenance. Save time and effort, no complicated steps.
  • Note:We are responsible for the product and believe in the quality of the product. Professional functions and high reliability will bring you a different experience and ensure the satisfaction of every customer.
SaleBestseller No. 4
CAIG LABORATORIES DeoxIT D100L-2DB Brush Applicator, More Than A Contact Cleaner, 7.4mL, Pack of 1
  • SEE IMAGES FOR FULL DESCRIPTION AND INFORMATION
  • Improves Conductivity without Shorting, Cleans, Deoxidizes, Lubricates and Protects, Reduces Intermittent Connections
  • Reduces Arcing & RFI, Reduces Wear & Abrasion
  • Ideal for applications in all industries; Audio/Video, Computers, Heavy Equipment, Automotive, Communications, Marine, Electrical, Energy, Photography, Security, Medical, Avionics, etc.
  • USES - ELECTRICAL: ALL Metal Connections; Batteries, Light Bulbs, Switches and Relays, Jacks and Plugs, Harnesses, Grounding Blocks, RCA jacks, XLRs, USB, HDMI, Ethernet, etc.
Bestseller No. 5
Hosa D5S-6 CAIG DeoxIT 5% Spray Contact Cleaner, 5 oz.
  • Cleans, protects, lubricates, and improves conductivity: rejuvenates and enhances electrical connections for clearer audio and better performance
  • Fast-acting deoxidizing solution: removes dust, debris, oxidation, and corrosion from metal surfaces, restoring contact and reducing noise
  • Safe for use on all metal connectors and contacts: will not harm plastics or other materials, and non-returnable due to hazmat safety reasons
  • Versatile and compatible with any audio equipment: ideal for use on connectors, contacts, switches, potentiometers, and other metal surfaces in musical instruments, pedals, amps, mixers, and more
  • Convenient and easy to use: comes in a 5 oz. aerosol spray can with an adjustable valve applicator, providing flushing action and evaporating within 2-3 minutes
Bestseller No. 6
Ambro-Sol - M200 Dry Cleaner for Electrical Contacts, Dry Cleaner for Electrical Contacts, Spray Suitable for Cleaning and Maintenance of Electrical Contacts, 100% Recyclable, NET WT. 9.4 Oz. 400ml.
  • DRY CLEANER SPRAY FOR ELECTRICAL CONTACTS - Specific product for thorough cleaning of electrical, electronic and electromagnetic contacts. Instantly removes moisture and greasy substances on the surface such as grease, oil, sludge, wax and glue, leaving the treated part clean and degreased. If used on particularly delicate surfaces, it may be aggressive, affecting them.
  • TECHNICAL CHARACTERISTICS - Color Transparent; Relative density: at 68°F 0.60 ÷ 0.64 g/ml; flash point 32°F; pressure at 68°F 4/6 bar; Odor threshold 47.5 mg/m3; Vapor pressure 240 hPa (68°F); Viscosity at 25ºC 0.700 mm2/s SIO D445 (ASTM D445); Dry Point 779°F Flammable product, do not use on live equipment. Store in a dry place and not at temperatures below 32°F and above 113°F.
  • CFS GAS FREE - All our spray cans do not contain gases harmful to the ozone and atmosphere instead we use LPG gas.Store the product in a dry place at a temperature between 32 and 113 ºF. If stored in the original packaging, the product can be conserved for 24 months. The product doesn’t expire. Keep out of the reach of children.
  • MADE IN ITALY - Ambro-Sol S.r.l. is one of the few companies in the industry nationwide and in Europe to directly manufacture and distribute its products under its own brand name. In full respect of 100% Made in Italy, Ambro-Sol's branded products are safe and innovative. The peculiarities that have made the company great can be summarized in the following concepts: qualitative and technological development, best value for money, professional and efficient service.
  • METAL RECYCLES FOREVER - Metal packaging satisfies all aspects of sustainability by ensuring total protection from contact with oxygen, gases, light, moisture or other contamination and preserves product characteristics for a long time, thus avoiding waste. Ambro-Sol is active in policies to raise awareness of the use of metal packaging as it provides huge energy savings on recycling the same and drastically reduces greenhouse emissions.
SaleBestseller No. 7
DeoxIT D100L-25C Precision Needle Applicator, More Than A Contact Cleaner, 25 mL, Pack of 1
  • SEE IMAGES FOR FULL DESCRIPTION AND INFORMATION
  • Improves Conductivity without Shorting, Cleans, Deoxidizes, Lubricates and Protects, Reduces Intermittent Connections
  • Reduces Arcing & RFI, Reduces Wear & Abrasion
  • Ideal for applications in all industries; Audio/Video, Computers, Heavy Equipment, Automotive, Communications, Marine, Electrical, Energy, Photography, Security, Medical, Avionics, etc.
  • USES - ELECTRICAL: ALL Metal Connections; Batteries, Light Bulbs, Switches and Relays, Jacks and Plugs, Harnesses, Grounding Blocks, RCA jacks, XLRs, USB, HDMI, Ethernet, etc.
Bestseller No. 8
BW-100 Non-Flammable Electronic Contact Cleaner Aerosol Spray- Safely Cleans Joycons, Computers, PCB and More - Removes dust, Dirt and contaminants on Contacts - Quick Dry|8oz/225g |
  • Improves conductivity by blasting away dust and cleaning sensitive electrical equipment
  • Non-flammable, quick evaporation, and zero residue
  • Prevent contact failure by regularly cleaning
  • Safe to use on rubber, metal, and most plastics. Compatibility test on small area is recommended before use
  • Extension straw attached for hard to reach areas enabling pinpoint precision
Bestseller No. 9
Innovative Products of America #8048 HD Fleet Technician's Electrical Terminal Maintenance Set
  • An assortment of tools specially designed for cleaning all vehicle electrical connections found in commercial heavy duty fleets
  • Cleans and restores male and female terminals on fleet connections
  • Remove corrosion and extends harness life and ensure proper diagnostic connectivity
  • Connector types: Deutsch, Connon, 7-way round pin, Bullet, Weather Pack, common ABS sensor and power connectors, trailer light connectors, common plow connections, etc.
  • Includes: Large and small spade termianl cleaners, 7-way round pin terminal cleaners, ABS sensor/power connector cleaner, (10) Diamond Micro Round Files, Trailer light bullet connecotr cleaner, 2 ml DeaxIT Contact Cleaner
SaleBestseller No. 10
CRC QD Contact Cleaner, 11 Wt Oz, Industrial Strength, Quick Drying, No Residue, Plastic-Safe Electronics Cleaner, Safe For Sensitive Electronics, Aerosol Spray
  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools and electrical equipment
  • QD Contact Cleaner: Helps to effectively eliminate dust, light oil, grease, and dirt from sensitive electronics and electrical equipment. This cleaner evaporates quickly, leaving no residue behind, and is safe to use on all plastics
  • FORMULA: QD Contact Cleaner evaporates quickly, leaving no residue behind and is safe to use on all plastics. Use where lower flashpoint cleaners are acceptable
  • APPLICATIONS: This liquid contact cleaner is ideal for use on telephones, PCs, relays, edge connectors, tape heads, busbars, circuits, contacts, printed circuit boards, switches and breakers
  • PRODUCT SPECIFICATIONS: QD Contact Cleaner is available in an 11 wt. oz. aerosol can. This product is NSF K2 Registered

Last update on 2024-03-26 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...