“This site contains affiliate links for which OEMDTC may be compensated” |
Classification: | Reference: | Date: |
EL21-002 | NTB21-057 | June 23, 2021 |
VOLUNTARY RECALL CAMPAIGN 2020-2021 VERSA FRONT TURN SIGNAL BULB INSPECTION
CAMPAIGN ID #: | PM986 |
APPLIED VEHICLES: | 2020-2021 Versa (N18) |
Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility.
INTRODUCTION
Nissan is conducting this voluntary recall campaign, on certain specific model year 20202021 Versa models, to inspect the right front and left front turn signal bulbs and, if necessary, replace them. This service will be performed at no charge to the customer for parts or labor.
IDENTIFICATION NUMBER
Nissan has assigned identification number PM986 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
SERVICE PROCEDURE
- Open the hood.
- Locate the front driver side combination lamp (Figure 1).
- Refer to the Electronic Service Manual (ESM): Section DRIVER CONTROLS > EXTERIOR LIGHTING SYSTEM > HALOGEN HEADLAMP (or) LED HEADLAMP > REMOVAL AND INSTALLATION > FRONT COMBINATION LAMP > Bulb Replacement.
HINT: The front turn signal lamp bulbs do not need to be removed from the sockets for the inspection.
- Locate the four character alpha numeric “lot code” of the bulb (Figure 3), and then write it on the repair order.
- Use of a light source may help to read the lot code.
- Is the lot code in Table 1 below?
NOTE: Only replace the bulb if it is in Table 1 below.
IMPORTANT: If the replacement bulb lot code is in Table 1 it CANNOT be used.
- Inspect the lot code on the new replacement bulb before it is installed, and confirm that it is not in Table 1.
- If the new replacement bulb is in Table 1, choose a different bulb and recheck against Figure 3 Table 1 until one is found that is not NG.
Table 1
NG LOT CODES |
X9ZR, X01M, X01N, X9ZQ, X998 |
- Reassemble the combination lamp with the known-good or replacement bulb.
NOTICE
After installing the bulb, install the bulb socket securely for water-tightness to prevent bulb damage.
- Perform steps 2-7 on the passenger side front turn signal bulb, and then proceed to step 9.
- Confirm that both left side and right side front turn signal bulbs operate correctly.
- Close the hood.
PARTS INFORMATION
DESCRIPTION | PART NUMBER | QUANTITY |
Turn Signal Lamp Bulb | 26717-9B91D | (1) |
(1) Order the number of bulbs needed based on the inspection result.
CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
CAMPAIGN (“CM”) ID | DESCRIPTION | OP CODE | FRT |
PM986 | Inspect both front turn signal lamp bulbs
OK Condition | PM9860 | 0.2 Hrs |
Inspect both front turn signal lamp bulbs and
Replace 1 Bulb | PM9861 | 0.2 Hrs | |
Inspect both front turn signal lamp bulbs and
Replace 2 Bulbs | PM9862 | 0.2 Hrs |
AMENDMENT HISTORY
PUBLISHED DATE | REFERENCE | DESCRIPTION |
June 23, 2021 | NTB21-057 | Original bulletin published |
Remedy Instructions and TSB
RCRIT-21V471-6624.pdf 714.616KB
Latest Recalls Documents
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs
- The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- 【Fitment For Nissan
】For Nissan
Altima 2009-2022; For Nissan
Rogue 2014-2022; For Nissan
Armada 2017-2021; For Nissan
Frontier 2008-2021; For Nissan
Pathfinder 2008-2020; For Nissan
Maxima 2016-2018; For Nissan
Murano 2015-2018.
- 【OE Number】26243-9B91A; 262439B91A
- 【Function】Made of copper, corrosion resistant, not easy to rust.Function - Harness plug Connector Holder with clasps can hold and provides a connection to the car bulb tight to solve the problem of very low light or non-working, socket short circuit, burned or melted.
- 【Easy to Install】Replace damaged lamp holders without the need For additional tools.
- 【Package Include】2 Pcs turn signal light sockets.
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high brightness chips per bulb, Working Voltage: 9v-30v (fit 12V, 24V vehicles).
- Fits: 3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3356 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc. Easy installation, plug and play.
- Application: Turn Signal Lights, Brake Lights, Tail Lights, Side Marker Lights, Corner Lights, Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Non-polarity design, more than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you. (New design launched in 2019, US Patent number US-D908272-S)
- 【Fitment】: FCNFLZF's turn signal light socket compatible with Nissan
Toyota 4Runner Lexus select models.(For compatible models and years, please see picture 2)
- 【Compatibility】:This turn socket with connector can replacement the related part number: 262439B91A, 93872237, 26243-5HA0A, 9007560083.Perfect match for the original one.
- 【High Quality】:Manufactured from high quality synthetic plastic,excellent electrical conductivity,stable characteristic and high reliability.Durable against harsh road and weather conditions, including winter salt and water intrusion.
- 【Feature】: 12-24 volt power entry socket,DC port plug,dual filament,directly replaced.Perfect match for the original one.
- 【After Sales 】 If you have any problem, please feel free to contact us. We will solve your problem within 24 hours or less.
- Practical Function: This turn signal bulb socket wiring harness set can directly replace the old turn signal lamp in the car. There will be no looseness after installation, resulting in a stable beam effect.
- Scope of Application: This turn signal harness kit part number is 26243-5HA0A and is compatible with the Nissan
Rogue Altima Pathfinder. If you are not sure whether your model year is compatible, you can send an email consultation in time.
- Excellent Performance: This lamp holder is made of plastic material, which is stable and insulating, wear-resistant and high-temperature resistant. The wire harness has excellent conductivity and bending performance, is not easy to break, and is reliable and durable. The bulb glows steadily and the filament is precise.
- Package Content: You will receive 1 amber dual filament bulb, 1 lamp holder, 1 wire harness connector. If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
- Easy to Install: To use, just connect the lamp holder and wiring harness plug, install the amber bulb and it's ready to use. Easy to install, helping you save time. The connector has sophisticated workmanship, stable performance, meets and exceeds OEM specifications, and can be used with confidence.
- Excellent Material Selection: This lamp holder is made of plastic material, which is stable and insulating, wear-resistant and high-temperature resistant. The wire harness has excellent conductivity and bending performance, is not easy to break, and is reliable and durable. The bulb glows steadily and the filament is precise.
- Function: This turn signal bulb socket wiring harness set can directly replace the old turn signal lamp in the car. There will be no looseness after installation, resulting in a stable beam effect.
- Easy to Install: To use, just connect the lamp holder and wiring harness plug, install the amber bulb and it's ready to use. Easy to install, helping you save time. The connector has sophisticated workmanship, stable performance, meets and exceeds OEM specifications, and can be used with confidence.
- Compatibility: This turn signal harness kit part number is 26243-5HA0A and is compatible with the Toyota Nissan
Rogue Altima Pathfinder. If you are not sure whether your model year is compatible, you can send an email consultation in time.
- Package Included: You will receive 1 amber dual filament bulb, 1 lamp holder, 1 wire harness connector. If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high brightness chips per bulb, Working Voltage: 9v-30v (fit 12V, 24V vehicles).
- Fits: 1157 BAY15D 1016 1034 1157 1157A 2057 2057A 2357 2357A 2357NA 2397 3496 7528 p21/5w etc. Easy installation, plug and play.
- Application: Turn Signal Lights, Brake Lights, Tail Lights, Side Marker Lights, Corner Lights, Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Exclusive design, more than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you. (New design launched in 2019, US Patent number US-D908272-S)
- 【Specially Compatible with Nissan
Altima 2010-2012 (Coupe), 2013-2020 & 2022 Front】 Designed for Mid-Size Sedans, these LED bulbs are optimized for Nissan
Altima models from 2010-2012 (Coupe), 2013-2020 and 2022 (front turn signal bulbs), providing a smooth and straightforward upgrade.
- 【Visibility & Safety Upgrade】 Emitting a bright amber light, these bulbs significantly increase the visibility of your turn signals, promoting safer driving interactions.
- 【Energy Efficiency】 Employing advanced LED technology, these bulbs shine brighter, last longer, and consume less power compared to standard bulbs.
- 【Durability and Reliability】 Designed to withstand rigorous use, ensuring consistent and dependable illumination under all driving conditions.
- 【Dedicated Support】 We are committed to your satisfaction and offer comprehensive customer service to address any questions or installation guidance. If you have any questions please contact us.
- 【Compatible】Replacement For Nissan
Rogue Altima Pathfinder Headlight Turn Signal Bulb Socket Harness Set
- 【Replacement Part Number】Headlight Turn Signal Bulb Socket Wire Harness Replace 262439B91A, 93872237, 26243-5HA0A, 9007560083.
- 【Features】Headlight Turn Signal Bulb Wiring Harness Socket Connector with low beam + high beam dual filament DC port plug, a 12-24 volt power socket, used to indicate the direction of the vehicle's turn, to attract the attention of others and improve the safety of the vehicle
- 【Customer Service】Please feel free to contact with us if there is any question about anything , we will reply in 24 hours to help solve the problem.
- 【Package includes】Signal Bulb Socket and Connector Pigtail Kit 1*Lampholder, 1*Wire connector, 1*Amber double filament bulb.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.