“This site contains affiliate links for which OEMDTC may be compensated” |
Classification: | Reference: | Date: |
RS23-003 | NTB23-080 | October 26, 2023 |
VOLUNTARY SAFETY RECALL CAMPAIGN
2004-2012 ARMADA, TITAN, AND 2004-2009 QUEST;
DRIVER AIR BAG COVER
CAMPAIGN ID #: | PC944, PC946, PC947, PC949 |
APPLIED VEHICLES: | 2004-2012 Armada (TA60) 2004-2009 Quest (V42) 2004-2012 Titan (A60) |
INTRODUCTION
Nissan is conducting this voluntary safety recall campaign on certain specific model year 2004-2012 Armada, 2004-2012 Titan, and 2004-2009 Quest vehicles, to inspect and if necessary, replace the driver Air Bag Cover. This service will be performed at no charge to the customer for parts or labor.
IDENTIFICATION NUMBER
Nissan has assigned identification numbers PC944, PC946, PC947 and PC949 to this campaign. The vehicle specific number must appear on all communication and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
Driver’s Side Air Bag Cover Emblem May Detach – 2008-2011 Nissan
Driver’s Side Air Bag Cover Emblem May Detach – 2008-2011 Nissan
Remedy Instructions and TSB
RCRIT-23V067-6130.pdf 3854.155KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V067&docType=RCL
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 2024 Top Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will cycle the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed. Follow the instruction step by step, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List. Tips: If a vehicle lacks the auto bleed function, this service will not work on the car.
- More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor, airbag circuits, cable connectors monitor and etc. Note: Scanner can not work on Airbag crash data. If the scanner can not connect to the car unit, please check if there is a good connection of them.
- No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & SRS/Airbag, and also performs daily reset services. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset functions. The issued parts will operate normally with this car scanner after the faults repaired. Note: Some classic vehicles without the electronic control system can not support reset service.
- Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
- 【Buy with Confidence】 As a America's No.1 diagnostic tool brand, Innova stands for innovation, quality, and accessibility in the automotive diagnostic industry. We are known for developing cutting-edge diagnostic tools that are user-friendly, reliable, and made for US by Americans.
- 【Unleash Your Drive's Potential】Much more than a car code reader, the 6100P scanner effectively reads and erases engine, ABS, SRS, and transmission codes for popular US car makes such as Ford, Chevy, Dodge, GM, etc. When the traction light is constantly on, the ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
- 【Your Car's Health Doctor】Easily view procedures or send commands for oil change, mileage or driving time reset for most 1996 and newer OBD2 vehicles. It also monitors your oil level and oil life status, ensuring optimal vehicle health.
- 【Battery & alternator Test】The Innova 6100P scanner is perfect for assessing the performance of the alternator in your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues.
- 【Drive with Confidence and Peace】Quickly identify if your vehicle needs immediate attention with our Code Severity Levels function. This feature helps you understand whether you need to fix an issue immediately or if it can wait until you get home, keeping warning lights at bay.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! It comes with h-igh-quality host with a strong box. Get LAUNCH CRP123 Elite car diagnostic scanner and give your lover a surprise!
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- 【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world,fit for ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- 【Updated New Version AD600】Discover the improved version of TOPDON AD600 OBD2 scanner. Now immerse yourself in a seamlessly diagnostic experience with Android 11.0 OS. With an upgraded 32G ROM, this scan tool offers ample storage and faster performance. The 5-inch display with 1280x720 resolution offers high-definition clarity, ensuring easy readability for every diagnostic detail.
- 【Professional 4 Systems Diagnostics】For car owners dealing with common issues such as engine, transmission, ABS, and SRS, the TOPDON AD600 code scanner delivers professional diagnostic services. It easily reads and clears fault codes, analyzes data streams and more, ensuring a quick identification of problems. Additionally, the DTC Lookup function provides corresponding fault code analysis.
- 【8 Hot Reset Functions】Say goodbye to costly trips to the repair shop for resetting after routine maintenance such as changing oil, replacing tires, or installing new brake pads. The AD600 diagnostic tool effortlessly tackles common automotive challenges with just one click. Cut costs and cut the hassle with its 8 reset functions: Oil/BMS/ABS/SAS/EPB/DPF/TPMS/Throttle.
- 【Support for 10,000+ Car Models】The upgraded AD600 car scanner now supports 67+ global brands and 10,000+ models, ensuring compatibility with a diverse range of vehicles. Whether American, German, French, or Japanese, the AD600 diagnostic scanner has you covered. (Note: Contact TOPDON customer service for vehicle compatibility inquiries before purchase).
- 【Lifetime Free Updates】The AD600 diagnostic tool offers a lifetime of free upgrades with convenient one-click updates via Wi-Fi. Our dedicated TOPDON technical team continuously enhances our product's software, providing users with expanded vehicle support and an improved user experience through regular updates.
- 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only., but not for Mac and ios system.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor, and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
Last update on 2024-04-01 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Classification: Reference: Date:
RS23-003 NTB23-080 October 26, 2023
Bulletins are intended for use by qualified technicians, not ‘do-it-yourselfers’. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/22
VOLUNTARY SAFETY RECALL CAMPAIGN
2004-2012 ARMADA, TITAN, AND 2004-2009 QUEST;
DRIVER AIR BAG COVER
CAMPAIGN ID #: PC944, PC946, PC947, PC949
APPLIED VEHICLES: 2004-2012 Armada (TA60)
2004-2009 Quest (V42)
2004-2012 Titan (A60)
Check Service COMM or Dealer Business Systems (DBS)
National Service History to confirm campaign eligibility.
INTRODUCTION
Nissan is conducting this voluntary safety recall campaign on certain specific model year
2004-2012 Armada, 2004-2012 Titan, and 2004-2009 Quest vehicles, to inspect and if
necessary, replace the driver Air Bag Cover. This service will be performed at no charge to
the customer for parts or labor.
IDENTIFICATION NUMBER
Nissan has assigned identification numbers PC944, PC946, PC947 and PC949 to this
campaign. The vehicle specific number must appear on all communication and
documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS)
National Service History for the campaign status on each vehicle falling within the range of
this voluntary safety recall which for any reason enters the service department. This
includes vehicles purchased from private parties or presented by transient (tourist) owners
and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer
inventory which are the subject of a safety recall must be corrected prior to sale.
Failure to do so can result in civil penalties by the National Highway Traffic Safety
Administration. While federal law applies only to new vehicles, Nissan strongly
encourages dealers to correct any used vehicles in their inventory before they are retailed.
2/22 NTB23-080
REQUIRED SPECIAL TOOL(S)
New or replacement Essential Tools are available from Tech Mate online:
www.techmatetools.com, or by phone: 1-833-397-3493.
When ordering, keep in mind that the tool part number prefix has changed from “J” to “NI”.
For example, J-52352 is now NI-52352.
Quick Scan Tool (J-52352)
Each dealer has been previously shipped one Quick Scan Tool (J-52352).
Figure 1
3/22 NTB23-080
SERVICE PROCEDURE
Remove the Driver’s Air Bag Module Assembly from the Vehicle
IMPORTANT: Follow all cautions, warnings, and notices in the ESM when working on or
near the SRS, such as an air bag.
Handle interior trim carefully to avoid damage. Work with clean hands and clean tools to
avoid dirt and stains. Use protective covers as needed.
1. Write down the radio settings.
Presets 1 2 3 4 5 6
AM
FM 1
FM 2
SAT 1
SAT 2
Bass Treble Balance Fade Speed Sen. Vol.
2. Turn the ignition OFF.
3. Disconnect both battery cables, negative cable first.
4. Wait at least 3 minutes.
5. Remove the Driver Air Bag Module.
Refer to the vehicle specific ESM: H: RESTRAINTS > SR – SRS Airbag >
REMOVAL AND INSTALLATION > DRIVER AIR BAG MODULE > Removal and
Installation
6. Place the Air Bag Module on a clean, flat, cloth covered surface.
7. Attach the Quick Scan Tool to a CONSULT PC’s USB port.
4/22 NTB23-080
8. Open ASIST on the CONSULT PC.
9. On the left side of the ASIST main menu, select TECH SUPPORT INFO, and then
Bulletin Support Items.
Figure 2
10. Select CLICK HERE… next to PC944/PC945/PC946/PC947/PC948/PC949 –
DRIVER AIR BAG MODULE.
Figure 3
TECH SUPPORT INFO
Bulletin Support Items
5/22 NTB23-080
11. Locate the Driver Air Bag Module serial number (Figure 4).
Figure 4
12. Scan the Driver Air Bag Module serial number bar code, and then select Submit.
If the serial number result is OK, no further action is needed. Skip to step 36 on
page 21.
If the serial number result is NG (Figure 5), continue to step 13 on page 6 to
Remove Driver Air Bag Module Cover.
Figure 5
Scan upper or
lower bar code
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
6/22 NTB23-080
Remove the Driver Air Bag Cover
IMPORTANT: Be careful not to damage the Driver Air Bag Module during Air Bag Cover
removal, as the supply of replacement Air Bag Modules is limited and replacement requires
authorization under this campaign.
13. Locate the fifteen (15) plastic locking tabs (Figure 6 and Figure 7) that retain the Air
Bag Cover to the metal housing.
Figure 6
Figure 7
Locking tabs (15)
Plastic locking tab
(1 of 15)
Air Bag Cover
Metal housing
7/22 NTB23-080
14. Using suitable needle nose pliers, disengage all fifteen (15) Air Bag Cover plastic
locking tabs (Figure 8 and Figure 9).
Rotate each Air Bag Cover plastic locking tab 180 degrees away from each of the
metal housing hooks.
IMPORTANT: Ensure that the cushion material under each plastic locking tab is not
grabbed or twisted by the needle nose pliers.
Figure 8
Figure 9
Metal housing hook
(1 of 15)
1 of 15 plastic locking tab disengaged
from metal housing hook
Metal housing hook
(1 of 15)
Plastic locking tab
(1 of 15)
8/22 NTB23-080
15. Using suitable needle nose pliers, pull the Air Bag Cover completely away from the
metal housing flange (Figure 10) at four (4) locations around its perimeter (Figure 11).
HINT: This will allow the metal housing hooks to be pushed down into the Air Bag
Cover, and then be disengaged.
Figure 10
Figure 11
Metal housing flange
Air Bag Cover
Metal housing
flange locations
9/22 NTB23-080
16. Compress the metal housing into the Air Bag Cover until ten (10) of the fifteen (15)
metal housing hooks, located at the 3 o’clock, 6 o’clock and 9 o’clock locations shown
in Figure 14, move into their locking tab windows (Figure 12 and Figure 13) and are
disengaged.
One (1) metal housing hook/locking tab window shown in Figure 12.
Figure 14
Figure 12 Figure 13
Engaged metal
housing hook
Disengaged metal
housing hook
9 o’clock
6 o’clock
3 o’clock
Locking tab
window
10/22 NTB23-080
17. Using your hands (or needle nose pliers to assist), twist the Air Bag Cover outward
away from ten (10), of the fifteen (15), metal housing hooks at the 3 o’clock, 6 o’clock
and 9 o’clock locations.
IMPORTANT: Ensure that the metal housing hooks do not bend or deform.
Figure 15
18. Grasp the Air Bag Module assembly at it’s 6 o’clock edge, and rotate the metal
housing away from the Air Bag Cover to disengage the five (5) remaining metal
housing hooks.
Figure 16
Air Bag Cover
11/22 NTB23-080
Inspect the Driver’s Air Bag Module for Damage
Visually confirm that none of the fifteen (15) metal housing hooks were damaged,
deformed or broken during disassembly.
If damage to the metal housing hooks is found the Air Bag Module assembly
MUST BE replaced. Skip to WCC Authorization on page 13.
Figure 17
19. Verify that the cushion pack is undamaged.
If one or more of the following is found, the entire Air Bag Module assembly
MUST BE replaced:
o One or more of the cushion tear seams (Figure 18) is damaged or separated.
o Snag, cut, or scrape, etc., is present in the cushion pack.
If replacement is indicated, skip to WCC Authorization on page 13.
Figure 18
Metal housing hook
(1 of 15)
Cushion pack
Cushion tear seams
12/22 NTB23-080
20. Locate the Air Bag Cover emblem’s metal clip and post heads shown in Figure 19,
and if found to be loose (Figure 20 and Figure 21) remove all loose components.
IMPORTANT: Confirm that both of the emblem’s post heads and the metal clip are
accounted for.
To avoid the risk of death or severe personal injury, All loose components must be
removed from the cushion pack. Loose components can become projectiles if the Air
Bag deploys.
21. Verify that no other objects, or debris, have entered the cushion pack, and then skip
to step 23 on page 14.
Figure 21
Figure 19 Figure 20
Emblem’s post
heads
Emblem’s metal clip
Loose emblem
post head
13/22 NTB23-080
WCC Authorization (Only Required for Air Bag Module Replacement)
22. Take a clear digital picture of the Repair Order and the damage to the Driver’s Air Bag
Module.
IMPORTANT: The Repair Order and the damage to the Driver’s Air Bag Module
MUST be in the same photo.
HINT: The picture file type must be JPEG, PNG, or PDF.
a. Send the photo to: claims-inspections@nissan-usa.com
o Include the following information in the title:
Campaign ID#
Dealer Code
VIN
Driver Air Bag Serial Number
b. Contact the Nissan Warranty Call Center (WCC) at 1-800-258-7008, option 7.
c. WCC will need to provide an approval for the Air Bag Module.
o If WCC approves replacement of the Air Bag Module, the approval number
must be included in the parts order.
o If WCC does NOT approve the replacement of the Air Bag Module, follow
specific instructions provided by WCC.
14/22 NTB23-080
Install the New Driver Air Bag Cover
23. On a clean, flat, cloth covered surface, place the new Air Bag Cover face-down
(emblem facing down) and the Air Bag metal housing cushion side down (Figure 22).
IMPORTANT: Confirm that loose objects or debris do not enter in the Air Bag Cover.
To avoid the risk of death or severe personal injury, do not allow any loose objects or
debris to enter in the Cover. Loose components can become projectiles if the Air Bag
deploys.
Figure 22
24. Engage the five (5) 12 o’clock metal housing hooks into the corresponding Air Bag
Cover locking tabs.
Figure 23 Figure 24
Air Bag Cover Air Bag metal housing
Metal housing hook
Air Bag Cover (1 of 5)
Air Bag metal housing
15/22 NTB23-080
25. Rotate the Air Bag metal housing downward and position the lower corners inside the
Air Bag Cover.
IMPORTANT: Verify that the cushion material is not caught between the Air Bag
metal housing and the Air Bag Cover (Figure 26). If needed, push any cushion
material back inside the Air Bag Cover.
Figure 25
Figure 26
Air Bag Cover
Air Bag metal housing
Air Bag Cover
Cushion material caught
between Air Bag metal
housing and Air Bag Cover
Air Bag metal housing
16/22 NTB23-080
26. While holding the Airbag Module assembly, insert/engage the Air Bag metal housing
hooks below the cover-wall edge by compressing the Air Bag metal housing into the
Air Bag Cover.
IMPORTANT: Ensure the cushion material is not pinched between the corners
when compressing.
The cover-walls will spread open as the Air Bag metal housing hooks push toward
their aligned cover-window locations.
Slowly compress the Air Bag metal housing and Air Bag Cover together, ensuring
that the metal housing hooks align and fully engage into each associated coverwindow.
HINT: Additional effort might be needed to ensure that cover-wall edges do not
rest on the metal housing hooks when compressing.
Figure 27
Air Bag Cover
Cover-wall edge
Metal housing hook
aligned with cover-window
(1 of 15)
Air Bag metal housing
17/22 NTB23-080
27. Verify that all fifteen (15) metal housing hooks are aligned and fully engaged into each
associated cover-window.
28. Slowly pull the Air Bag metal housing and the Air Bag Cover apart (Figure 28) to lock
all fifteen (15) metal housing hooks into each associated cover-window location.
Three metal housing hooks (Figure 28) shown with associated cover-window, for
reference.
Figure 28
Air Bag metal housing Air Bag Cover
Metal housing hook
aligned with cover-window
(1 of 15)
18/22 NTB23-080
29. If needed, use a finger to push and seat each of the fifteen (15) Air Bag Cover locking
tabs under each metal housing hook (Figure 29).
Figure 29
30. Ensure each of the four (4) housing flanges are positioned over the cover-wall edge
and the housing corners are seated with no cushion material visible.
Figure 30 and Figure 31 show an example of one (1) of the four (4) housing
flanges seated correctly.
Figure 32 is an example of an incorrectly seated housing flange.
Figure 30 Figure 31 Figure 32
Air Bag Cover locking tab
(1 of 15)
Correctly seated
housing flanges
Incorrectly seated
housing flange
19/22 NTB23-080
31. Ensure that the cushion is not pinched around the perimeter of the housing-to-cover
interface (Figure 33).
Use a paint pen to mark all four (4) Air Bag housing corners to acknowledge the
cushion is not pinched (Figure 33).
32. Verify all four (4) metal housing flanges are properly positioned over the cover-wall
(Figure 33), and then mark them with a paint pen to acknowledge verification.
33. Verify that all fifteen (15) Air Bag Cover locking tabs are engaged below the metal
housing hooks and are in their locked positions (Figure 33), and then mark each with
a paint pen to acknowledge verification.
Figure 33
Air Bag housing
corner (4)
Cover locking tab
(15)
Housing-to-cover
interface.
Metal housing flange
(4)
20/22 NTB23-080
34. Visually inspect inflator connector pockets for debris, bent pins or shorting clip
damage (Figure 34).
Figure 34
35. Visually inspect emblem and textured cover surface for scratches or damage.
Figure 35
21/22 NTB23-080
Install the Driver’s Air Bag Module
36. Install the Driver Airbag Module assembly into the steering wheel with two (2) new
bolts.
Refer to the vehicle specific ESM section: H: RESTRAINTS > SR – SRS Airbag >
REMOVAL AND INSTALLATION > DRIVER AIR BAG MODULE > Removal and
Installation
PARTS INFORMATION
IMPORTANT:
DO NOT order the Air Bag Module part number listed in the EPC.
Use the VIN to look up the “CURRENT AIR BAG MODULE PART NUMBER
FOUND IN THE EPC” and order the corresponding cover part number listed in the
“ORDER AIR BAG COVER PART NUMBER” column.
CURRENT AIR BAG
MODULE PART NUMBER
FOUND IN EPC
ORDER AIR BAG
COVER PART
NUMBER
DESCRIPTION QUANTITY
98510-ZM40C 98510-ZM42C
KIT-SERVICE,
AIR BAG
COVER,
DRIVER
1
If needed
98510-ZM40A 98510-ZM42A 1
If needed
98510-ZM78A 98510-ZM71C 1
If needed
98510-ZC08A 98510-ZC01C 1
If needed
98510-ZC08B 98510-ZC01D 1
If needed
98510-ZQ08A 98510-ZQ01C 1
If needed
98510-ZQ08B 98510-ZQ01D 1
If needed
98510-ZV08C 98510-ZV01D 1
If needed
98510-ZM40B 98510-ZM42B 1
If needed
98510-ZM78C 98510-ZM71D 1
If needed
N/A 011210046U BOLT 2
If needed
22/22 NTB23-080
CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
CAMPAIGN (“CM”) ID DESCRIPTION OP CODE FRT
PC944
Inspect Air Bag and Replace Cover PC9440 1.1
Inspect Air Bag – OK Condition PC9441 0.6
PC947
Inspect Air Bag and Replace Cover PC9470 1.1
Inspect Air Bag – OK Condition PC9471 0.6
PC946
Inspect Air Bag and Replace Cover PC9460 1.1
Inspect Air Bag – OK Condition PC9461 0.6
PC949
Inspect Air Bag and Replace Cover PC9490 1.1
Inspect Air Bag – OK Condition PC9491 0.6
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE DESCRIPTION
October 26, 2023 NTB23-080 Original bulletin published
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END