| Classification: | Reference: | Date: |
| RS24-004 | ITB24-004 | March 5, 2024 |
VOLUNTARY SAFETY RECALL CAMPAIGN
2024 QX60; DRIVER SEATBELT PRETENSIONER
| CAMPAIGN ID #: | PD107 |
| APPLIED VEHICLES: | 2024 QX60 (L51) |
INTRODUCTION
Infiniti
is conducting this voluntary safety recall campaign on certain specific model year 2024 QX60 vehicles to inspect and, if necessary, replace the driver seatbelt pretensioner. This service will be performed at no charge to the client for parts or labor.
IDENTIFICATION NUMBER
Infiniti has assigned identification number PD107 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
It is the retailer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) clients and vehicles in a retailer’s inventory. Federal law requires that new vehicles in retailer inventory which are the subject of a safety recall must be corrected prior to sale.
Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Infiniti strongly encourages retailers to correct any used vehicles in their inventory before they are retailed.
SERVICE PROCEDURE
IMPORTANT: Follow all cautions, warnings, and notes in the Electronic Service Manual (ESM) when working on or near a Supplemental Restraint System (SRS), such as an air bag.
WARNING
To avoid the risk of death or severe personal injury, always observe the following items for preventing accidental activation:
- Before servicing, place the ignition switch in the OFF position, disconnect 12V battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refer to Precautions for Removing Battery Terminal in the ESM.
- Never use air tools or electric tools for
CAUTION
To avoid the risk of minor personal injury, property damage, and damage to the vehicle, always observe the following:
- Never place the seat belt pre-tensioner retractor and lap pre-tensioner in an area where the temperature reaches 80°C (176°F) or more.
- Always use a remover tool that is made of plastic to prevent damage to the
- Remove the driver (LH) side Rear Kicking Plate Inner.
- Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND INSTALLATION > BODY SIDE TRIM > KICKING PLATE > Removal and Installation > Rear Kicking Plate
- Remove the driver Front Kicking Plate Inner.
- Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND INSTALLATION > BODY SIDE TRIM > KICKING PLATE > Removal and Installation > Front Kicking Plate
- Move the driver seat all the way forward.
- Remove the Center Pillar Lower Finisher.
- Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND INSTALLATION > BODY SIDE TRIM > CENTER PILLAR LOWER FINISHER > Removal and Installation
- Carefully move the foam away from the Driver Seatbelt Pretensioner lower anchor.
- Inspect the Driver Seatbelt Pretensioner for the presence of a rivet, as shown in Figure 7.
- If the rivet is present on the Driver Seatbelt Pretensioner, no further action is needed. Continue to step 8 to reassemble the vehicle.
- If the rivet is missing from the Driver Seatbelt Pretensioner, replace the Driver Seatbelt Pretensioner, and then continue to step 8 to reassemble the vehicle.
- Reposition the foam against the Driver Seatbelt Pretensioner lower anchor.
- Reposition the carpet back to its original location.
IMPORTANT: Verify all panel clips are present and attached to each individual finisher and kicking plate before reinstallation.
- Reinstall the Center Pillar Lower Finisher.
- Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND INSTALLATION > BODY SIDE TRIM > CENTER PILLAR LOWER FINISHER > Removal and Installation
- Reinstall the Front Kicking Plate
- Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND INSTALLATION > BODY SIDE TRIM > KICKING PLATE > Removal and Installation > Front Kicking Plate
- Reinstall the Rear Kicking Plate
- Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND INSTALLATION > BODY SIDE TRIM > KICKING PLATE > Removal and Installation > Rear Kicking Plate
PARTS INFORMATION
| DESCRIPTION | PART NUMBER | QUANTITY |
| BELT ASSY – OUTER, PRETENSIONER FRONT LH | 86889-6TA8A | 1
(If Needed) |
PD106 & PD107 – Unsecured Lap Belt Pretensioners – 2024 Nissan Pathfinder & Infiniti QX60
Remedy Instructions and TSB
RCRIT-24V176-4629.pdf 3530.93KB
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
- [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
- [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
- [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
- [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
- 【Full Systems Automotive Diagnostic】 More than checking engine, ABS and SRS, OBDMATE OM970 obd2 scanner performs comprehensive diagnostics on all electric modules. It quickly scans and clears fault codes, turns off warning lights, reads live data, and features Auto-VIN technology.
- 【Live Datastream&4-in-1 Graph】 Easily view live sensor data such as RPM, fuel trims, ATF temperature, wheel speed sensor, battery voltage and so on. OM970 scan tool also supports 4-in-1 trend graphing. Spend just 3 minutes to check – and you'll know exactly what's going wrong, helping you avoid hundreds in dealership diagnostic fees.
- 【One-Click I/M Readiness&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether your vehicle's emissions-related systems are operating properly. Help you get smog-check ready quickly. OM970 obd2 diagnostic tool supports all essential OBD2 functions you need. Plus, it features battery voltage test and DLC 16-PIN test.
- 【Straightforward Menus with Easy Navigation】 All functions are easy to understand without obscure decriptions. 3.5" Large screen delivers clear readings while keeping one-hand operation. The car diagnostic tool comes with a silicone protective case and a hard-shell carrying case, ensuring long-lived durability and drop resistance.
- 【Budget-Friendly, No Subscriptions, Free Software Updates】 Plug and play: no bluetooth pairing, monthly fees, Wi-Fi connection, or any other troublesome initial settings. OM970 obd2 scanner works out of the box with the latest software. Lifetime free upgrade.
- Updated New Version AD600S: Discover the improved version of TOPDON AD600S OBD2 scanner. Now immerse yourself in a seamlessly diagnostic experience with Android 11.0 OS. With an upgraded 32G ROM, this scan tool offers ample storage and faster performance. The 5-inch display with 1280x720 resolution offers high-definition clarity, ensuring easy readability for every diagnostic detail
- Professional 4 Systems Diagnostics: For car owners dealing with common issues such as engine, transmission, ABS, and more, the TOPDON AD600S code scanner delivers professional diagnostic services. It easily reads and clears fault codes, analyzes data streams and more, ensuring a quick identification of problems. Additionally, the DTC Lookup function provides corresponding fault code analysis
- 9 Hot Reset Functions: Say goodbye to costly trips to the repair shop for resetting after routine maintenance such as changing oil, replacing tires, or installing new brake pads. The AD600S diagnostic tool effortlessly tackles common automotive challenges with just one click. Cut costs and cut the hassle with its 9 reset functions: Oil/BMS/ABS/SAS/EPB/DPF/TPMS/Throttle/injector coding
- Support for 10,000+ Car Models: The upgraded AD600S car scanner now supports 67+ global brands and 10,000+ models, ensuring compatibility with a diverse range of vehicles. Whether American, German, French, or Japanese, the AD600S diagnostic scanner has you covered. (Note: Contact TOPDON customer service for vehicle compatibility inquiries before purchase)
- Lifetime Free Updates: The AD600S diagnostic tool offers free upgrades with convenient one-click updates via Wi-Fi. Our dedicated TOPDON technical team continuously enhances our product's software, providing users with expanded vehicle support and an improved user experience through regular updates
SEOCONTENT-START
Classification: Reference: Date:
RS24-004 ITB24-004 March 5, 2024
Bulletins are intended for use by qualified technicians, not ‘do-it-yourselfers’. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Infiniti retailer to determine if this applies to your vehicle.
1/7
VOLUNTARY SAFETY RECALL CAMPAIGN
2024 QX60; DRIVER SEATBELT PRETENSIONER
CAMPAIGN ID #: PD107
APPLIED VEHICLES: 2024 QX60 (L51)
Check Service COMM or Dealer Business Systems (DBS)
National Service History to confirm campaign eligibility.
INTRODUCTION
Infiniti is conducting this voluntary safety recall campaign on certain specific model year
2024 QX60 vehicles to inspect and, if necessary, replace the driver seatbelt pretensioner.
This service will be performed at no charge to the client for parts or labor.
IDENTIFICATION NUMBER
Infiniti has assigned identification number PD107 to this campaign. This number must
appear on all communication and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
It is the retailer’s responsibility to check Service COMM or Dealer Business Systems (DBS)
National Service History for the campaign status on each vehicle falling within the range of
this voluntary safety recall which for any reason enters the service department. This
includes vehicles purchased from private parties or presented by transient (tourist) clients
and vehicles in a retailer’s inventory. Federal law requires that new vehicles in retailer
inventory which are the subject of a safety recall must be corrected prior to sale.
Failure to do so can result in civil penalties by the National Highway Traffic Safety
Administration. While federal law applies only to new vehicles, Infiniti strongly
encourages retailers to correct any used vehicles in their inventory before they are retailed.
2/7 ITB24-004
SERVICE PROCEDURE
IMPORTANT: Follow all cautions, warnings, and notes in the Electronic Service Manual
(ESM) when working on or near a Supplemental Restraint System (SRS), such as an air
bag.
To avoid the risk of death or severe personal injury, always observe the following items for
preventing accidental activation:
Before servicing, place the ignition switch in the OFF position, disconnect 12V
battery negative terminal and wait for 3 minutes or more (discharges electricity
held in the additional power supply circuit of the air bag diagnosis sensor unit).
Refer to Precautions for Removing Battery Terminal in the ESM.
Never use air tools or electric tools for servicing.
To avoid the risk of minor personal injury, property damage, and damage to the vehicle,
always observe the following:
Never place the seat belt pre-tensioner retractor and lap pre-tensioner in an area
where the temperature reaches 80°C (176°F) or more.
Always use a remover tool that is made of plastic to prevent damage to the parts.
Figure 1
1. Remove the driver (LH) side Rear
Kicking Plate Inner.
Refer to the ESM: BODY
INTERIOR > INTERIOR >
REMOVAL AND INSTALLATION
> BODY SIDE TRIM > KICKING
PLATE > Removal and
Installation > Rear Kicking Plate
Rear Kicking Plate
Inner
3/7 ITB24-004
Figure 2
Figure 3
Figure 4
2. Remove the driver Front Kicking Plate
Inner.
Refer to the ESM: BODY
INTERIOR > INTERIOR >
REMOVAL AND INSTALLATION
> BODY SIDE TRIM > KICKING
PLATE > Removal and
Installation > Front Kicking Plate
3. Move the driver seat all the way
forward.
4. Remove the Center Pillar Lower
Finisher.
Refer to the ESM: BODY
INTERIOR > INTERIOR >
REMOVAL AND INSTALLATION
> BODY SIDE TRIM > CENTER
PILLAR LOWER FINISHER >
Removal and Installation
Front Kicking Plate
Inner
Center Pillar
Lower
Finisher
4/7 ITB24-004
Figure 5
Figure 6
5. Position the carpet away from the
Driver Seatbelt Pretensioner.
6. Carefully move the foam away from
the Driver Seatbelt Pretensioner lower
anchor.
Driver Seatbelt
Pretensioner
Foam
Carpet
5/7 ITB24-004
7. Inspect the Driver Seatbelt Pretensioner for the presence of a rivet, as shown in
Figure 7.
If the rivet is present on the Driver Seatbelt Pretensioner, no further action is
needed. Continue to step 8 to reassemble the vehicle.
If the rivet is missing from the Driver Seatbelt Pretensioner, replace the Driver
Seatbelt Pretensioner, and then continue to step 8 to reassemble the vehicle.
o Refer to the ESM: RESTRAINTS > SEAT BELT > REMOVAL AND
INSTALLATION > FRONT SEAT BELT > SEAT BELT RETRACTOR > FOR
USA AND CANADA > Removal and Installation
Figure 7
Figure 8
8. Reposition the foam against the Driver
Seatbelt Pretensioner lower anchor.
Foam
Rivet
Rivet
Missing Rivet
GOOD Example
NO GOOD Example
6/7 ITB24-004
Figure 9
IMPORTANT: Verify all panel clips are present and attached to each individual finisher and
kicking plate before reinstallation.
10. Reinstall the Center Pillar Lower Finisher.
Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND
INSTALLATION > BODY SIDE TRIM > CENTER PILLAR LOWER FINISHER >
Removal and Installation
11. Reinstall the Front Kicking Plate Inner.
Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND
INSTALLATION > BODY SIDE TRIM > KICKING PLATE > Removal and
Installation > Front Kicking Plate
12. Reinstall the Rear Kicking Plate Inner.
Refer to the ESM: BODY INTERIOR > INTERIOR > REMOVAL AND
INSTALLATION > BODY SIDE TRIM > KICKING PLATE > Removal and
Installation > Rear Kicking Plate
9. Reposition the carpet back to its
original location.
Carpet
7/7 ITB24-004
PARTS INFORMATION
DESCRIPTION PART NUMBER QUANTITY
BELT ASSY – OUTER, PRETENSIONER FRONT
LH 86889-6TA8A 1
(If Needed)
CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
CAMPAIGN (“CM”) ID DESCRIPTION OP CODE FRT
PD107
Inspect Driver Seatbelt Pretensioner
(OK Condition) PD1070 0.2
Inspect and Replace Driver Seatbelt
Pretensioner PD1071 0.7
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE DESCRIPTION
March 5, 2024 ITB24-004 Original bulletin published
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.