R1916 & R1920 – Anti-lock Braking System (ABS) Actuator – 2015-2019 Nissan

“This site contains affiliate links for which OEMDTC may be compensated”

November 8, 2019 NHTSA CAMPAIGN NUMBER: 19V807000

Brake Fluid Can Leak Into ABS Pump and Ignite

A brake fluid leak on the circuit board may result in an electrical short, increasing the risk of a fire.

 

NHTSA Campaign Number: 19V807

Manufacturer Nissan North America, Inc.

Components SERVICE BRAKES, HYDRAULIC

Potential Number of Units Affected 394,025

 

Summary

Nissan North America, Inc. (Nissan) is recalling certain 2015-2018 Nissan Murano, 2016-2018 Nissan Maxima, and 2017-2019 Nissan Pathfinder and Infiniti QX60 vehicles. These vehicles were previously recalled and unrepaired, or inspected and determined to not need a repair, under recall number 18V-601. In addition, this recall expands the previous population. The Anti-lock Brake System (ABS) actuator pumps may allow brake fluid to leak onto an internal circuit board.

 

Remedy

Nissan will notify owners, and dealers will replace the ABS actuator, free of charge. Owners will receive a second notice when remedy parts become available, currently expected to be during summer 2020. Owners may contact Nissan customer service at 1-800-867-7669. Note: If the ABS warning light remains illuminated for more than 10 seconds after engine start up, owners are advised to park the vehicle outdoors away from other vehicles or structures and to not drive the vehicle.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Nissan has a Recall

 


SAFETY RECALL

CAMPAIGN BULLETIN

Anti- lock Braking System (ABS) Actuator
Voluntary Safety Recall Campaign

 

Reference: R1916 and R7920
Date: September 30, 2020

Attention: Dealer Principal, Sales, Service & Parts Managers

 

IMPORTANT: It is a violation of Federal law for dealers to sell or deliver vehicles in their inventory covered by this notification until the campaign action is performed.

 

UPDATE September  30, 2020
Please discard earlier versions of this bulletin.
 

The announcement from September 11, 2020 has been revised to include:

  • As previously announced, unused parts have a 12-mont h shelf life. Nissan does not anticipate t here to be any expired parts as long as FIFO inventory management has been Nissan has recently become aware that there may be another date code format being used.
    • Dealers should return campaign parts in inventory that were produced on or before March 2020, t o their facing PDC using a G-Code by no later than October 23 2020 (See Q&A section for how to identify the expiration date of parts).
      • Parts will not be returnable after October 23, 2020
Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale In Effect
MY20 16- 78 Maxima 82,374 22 November 13, 2019

YES

MY20 15-18 Murano 115,518 18
MY2017-19 Pathfinder 126,579 23

 

***** Campaign Summary ***** 

Nissan is committed to safety, security, and satisfaction of our customers and their passengers. Nissan is con ducting a Voluntary Safety Recall Campaign on certain 2016- 2018 Nissan Maxim a, 2015-2018 Nissan Murano, and 2017-2019 Nissan Pathfinder vehicles to re place the Anti- lock Braking System (ABS) actuator.

Due to manufacturing variation, the subject vehicles (equipped with ADVICS ABS actuators) may contain an oil seal with inadequate  sealing  performance. These  conditions could cause the oil seal to wear prematurely and eventually lead to leakage of brake fluid onto the control electronic circuit  board. If this occurs, an ABS warning  lamp  will illuminate to warn the driver. If the vehicle continues to be operated in this condition, the brake fluid leak may create an electrical short in the actuator circuit, which in rare instances, may lead to a fire.

If the ABS warning lamp is continually illuminated (10 seconds or longer), Nissan recommends parking the vehicle out side and contacting Nissan Roadside Assistance (1-800-647-7261 option 1) to have the vehicle towed to an authorized Nissan service department as soon as possible.

 

***** IMPORTANT ***** 

If the ABS warning lamp is illuminated and there is a delay between when the vehicle arrives at the dealer and the actuator replacement, park the vehicle outside away from any structures and other vehicles and then DISCONNECT the 12-volt battery until the actuator can be replaced.

 

****” What Dealers Should Do**** 

  1. Verify if vehicles are affected by this Voluntary Safety Recall Campaign using Service Comm or DBS National Service History – Open Campaign I.D. R1916 or R1920 .
    • New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Cam paig n).
      • Refer to NPSB 15-46 0 for additional information

 

  1. Dealers must not sell, lease, trade, rent or loan any vehicles in dealer inventory affected by this recall campaign until after the vehicle has been
    • Dealers should not use any Nissan Rental Cars (NRC) subject to this recall until they have remedied the vehicle.

 

  1. Dealers should use NTB19-104 to remedy any vehicles subject to this campaign .

 

***** Release Schedule *****

Parts
  • Parts listed below may be ordered via norm al ordering process:
  • Unused parts have a 12-month shelf life. Nissan recommends dealers use first-in, first-out (FIFO) inventory management to reduce the likelihood of parts expiration.
    Dealers may use their DBS VIN ordered parts for other repairs as needed.

    • Dealers should return campaign parts in inventory that were produced on or before March 2020, to their facing PDC using a G-Code by no later than October 23, 2020.
      • Parts will not be returnable after October 23, 2020
Repair
  • NTB19-104
Owner Notification
  • Nissan notified all owners of all potentially affected vehicles via an interim notice in December 2019, via US. Mail.
    • Owners have been instructed to contact the dealer immediately if their ABS light remains continuously illuminated (10 seconds or longer).
  • Nissan sent a second owner notification, beginning September 2020, inviting owners to bring their vehicle in for repair now that parts are readily available.

 

***** Dealer Responsibility ***** 

It 1s the dealers responsibility to check Service Comm or DBS National Service History – Open Campaign using the appropriate Campaign I.D for the campaign status on each vehicle falling within the range of this voluntary safety recall campaign, which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in dealer inventory. If a VIN subject to this recall campaign was part of a dealer trade, the letter associated with that VIN should be forwarded to the appropriate dealer for service completion

 

NISSAN NORTH AMERICA, INC.

Aftersales DIVISION


Frequently Asked Questions (FAQ):

 

Q. Is this a safety recall?
A. Yes.

 

Q. What is the reason for this safety recall?
A. The ABS actuator pump seal may leak, causing the electronic circuit board to malfunction and the ABS warning lamp to illuminate. If the vehicle continues to be operated in t his condition, the leak could cause an electrical short in the actuator circuit, which in rare cases, may lead to a fire.

 

Q. What will be the corrective action for this voluntary safety recall campaign?
A. Dealers will replace the ABS actuator with a countermeasure part

 

Q. What should I tell inquiring customers?
A. Ask the customer if the ABS warning lamp is continuously illuminated. It is normal for the ABS light to illuminate and then extinguish after a few seconds when a vehicle is first started.

lf yes:

Tell the customer to park the vehicle outside and away from structures and contact Nissan Roadside Assistance (1-800-647-7267, option 1) to have the vehicle towed to the dealership as soon as possible.

lf no:

Offer to make an appointment to repair the vehicle as soon as possible. Customers may continue to drive their vehicle, but if the ABS warning lamp remains continuously illuminated, Nissan urges owners to park the vehicle outside and contact Nissan Roadside Assistance to have the vehicle towed to the dealership as soon as possible.

 

Q. How long will the corrective action take?
A. The ABS actuator replacement repair time is – three (3) hours. However, your dealer may require your vehicle for a longer period of time based on their work schedule.

 

Q. When will vehicle owners be notified?
A. Nissan notified owners of all potentially affected vehicles via an interim notice in December 2019 via US Mail. Owners have been instructed to contact t he dealer immediately if their ABS light remains continuously illuminated.

Nissan sent a second owner notification, beginning September 2020, inviting owners to bring their vehicle in for repair now that parts are readily available.

 

Q. Are parts readily available?
A. Yes.

 

Q. Why do these parts have a 12-month shelf life?
A. The hygroscopic nature of brake fluid can damage parts that have been sitting on shelves for an extended period of time. Nissan is not aware of any incident attributed to shelf life on installed components. Nissan recommends owners follow all recommended maintenance intervals for
their vehicle.
Q. How do I identify if unused parts in inventory have exceeded their shelf life?
A. The date code should be located on the part as per the screen shot below

date code

Alternatively, if the date code is damaged or illegible, a OR Code Reader application may be downloaded to a smartphone and used to scan the OR code to identify the manufacture date of the part.

A limited quantity of parts may contain the following date format:

date code

 

Q. My vehicle was recalled and inspected or repaired before (R1807 and R1809). Why do I need to bring my vehicle in again?
A. This recall expands the scope of previously announced recalls R1807 and R1809. Previously recalled vehicles that did not receive the latest countermeasure part, will be recalled and remedied again with a different replacement part

 

Q. Is my vehicle safe to drive?
A. If the ABS warning Light is ON (10 seconds or longer), do not drive your vehicle; park it outside away from structures and other vehicles. Have your vehicle towed to a Nissan dealer by calling Nissan Roadside Assistance (1-800-647-7261 option 1)

If the ABS Warning Light is NOT ON, customers should make an appointment to have the remedy applied as soon as poss·1ble Owners may continue to drive their vehicle, but Nissan urges owners to contact Nissan Roadside Assistance if the ABS warning lamp remains illuminated continuously (10 seconds or longer).

 

Q. Is there anything owners can do to mitigate this condition?
A. Owners should make an appointment to have the remedy applied as soon as possible. However, if the ABS warning lamp remains continuously illuminated after starting the vehicle, instruct the customer to stop d riving the vehicle immediately and arrange to have the customer’s vehicle towed to the dealership, as soon as possible.

  • Nissan Roadside Assistance 1-800-647-7261 (option 1)
  • Customers should park outdoors – away from vehicles and structures until the tow truck arrives.

 

Q. Is there any charge for the repair?
A. No, the remedy will be performed for the customer free of charge for parts and labor.

 

Q. Will a rental vehicle be provided while the dealer is servicing the vehicle?
A. Rental is available while replacement parts are on order.

EXPENSE CODE DESCRIPTION AMOUNT
502 Rental Expense $200 (Max)
Contact the Warranty claims call center 7-800-258-7008 Option 7, if additional expense is required. Please refer to WBP19-017 for additional information on rental guidelines.

 

Q. Is towing covered for vehicles outside of warranty that are no longer eligible for Nissan Roadside Assistance?
A. Yes, the campaign will cover the towing costs for affected vehicles that are no longer eligible for
Roadside Assistance (out of warranty):

EXPENSE CODE DESCRIPTION AMOUNT
501 Towing $100 (Max)
Contact the warranty claims call center 7-800-258-7008 Option 7, if additional expense is required.

 

Q. Will I have to take my vehicle back to the selling dealer to have the service?
A. No, any authorized Nissan dealer is able to perform the recall campaign.

For Consumer Affairs: Please inform us of the dealer where you would like to have the corrective action completed. Please refer to question ‘What should I tell inquiring customers” above to determine if immediate action should be taken

Q. If a customer previously paid for ABS actuator repairs or replacement are they eligible for reimbursement?
A. Customers may be eligible for reimbursement for any repairs that were previously performed for this issue using customer pay or partial goodwill. Dealers with customer reimbursement concerns may refer to the following:

  • If you have additional questions you may visit www.nissanassist.com or contact Nissan Consumer Affairs@ 1-800-867-7669
  • If you have previously paid for repairs to your ABS actuator please gather the following documentation prior to contacting Nissan Consumer Affairs:
    • Repair order(s)
    • Proof of payment (may be on repair order(s))
    • Proof of ownership if the repair is over $1,000

 

Q. How many vehicles are involved in the campaign?
A.
Model Total Production Range
Maxima 82,374 February 10, 2015 through May 22, 2018
Murano 115,518 August 22, 2014through May 37, 2078
Pathfinder 126,579 April 20,2016 through May23, 2018

 

Q. Are you experiencing this condition on any other Nissan (or INFINITI) models?
A. Yes, certain 2017-2019 INFINITI OX60 vehicles are also affected by this recall.

 

 

Revision History: 

Date Announcement Purpose
November 13 , 2019 Original New recall announcement
December 18, 2019 REVISION 1 Updated bulletin, parts ordering and deferment form completion information
December 20, 2019 REVISION 2 Parts information updated with table from TSB (NTB19-103) and TSB (NTB19-104) revision publication date
September 11, 2020 REVISION 3 Update regarding parts restriction removal and regarding 72-month shelf life.
September 30, 2020 REVISION 4 Update regarding alternate date code format and parts return information.

 

CAMPAIGN ID: R1916, R1920 | REVISION 4

 


November 22, 2019

 

Mr. Jeff Giuseppe
Associate Administrator for Enforcement
National Highway Traffic Safety Administration
Attn: Recall Management Division (NVS-215)
Room W48-302
1200 New Jersey Avenue, SE
Washington, D.C. 20590

 

Dear Mr. Giuseppe:

We are transmitting the enclosed amendment and supplement to the Defect Information Report filed on November 8, 2019 in accordance with 49 CFR Part 573.  This report updates sections 2, 3, 5, 6 and 7, respectively.

 

Very truly,

 

Derek Latta
Manager,
Technical Compliance

 

Encl.

 

AMENDED DEFECT INFORMATION REPORT

 

  1. Vehicle Manufacturer:

Nissan North America, Inc., Canton Plant
Nissan North America, Inc., Smyrna Plant

 

Anti-Lock Brake System (ABS) actuator part numbers:

Model Year/Make Model Part Description Part Number
MY2016-2018 Nissan Maxima ABS ACTUATOR ASSY 47660-4RB1C
MY2015-2018 Nissan Murano ABS ACTUATOR ASSY – AWD 47660-9UD6D
MY2015-2018 Nissan Murano ABS ACTUATOR ASSY – FWD 47660-9UD6C
MY2017-2019 Nissan Pathfinder ABS ACTUATOR ASSY 47660-9PP1B
MY2017-2019 Nissan Pathfinder ABS ACTUATOR ASSY 47660-9PP1D
MY2017-2019 INFINITI QX60 ABS ACTUATOR ASSY 47660-9PP1B
MY2017-2019 INFINITI QX60 ABS ACTUATOR ASSY 47660-9PP1D
Brake Fluid Brake Fluid (DOT 3 Type 12oz) 999MP-A4100P
 

 

 

 

 

  1. Units Potentially Involved:

Production period of affected vehicles involved:

Model Year/Make Model Dates of Manufacture
MY2016-2018 Nissan Maxima February 10, 2015 (SOP) through May 22, 2018 (02/10/15 to 01/05/17 were subject to 18V-601)
MY2015-2018 Nissan Murano August 22, 2014 (SOP) through May 31, 2018 (08/22/14 to 02/24/2017 were subject to 18V-601)
MY2017-2019 Nissan Pathfinder April 20,2016 (SOP) through May 23, 2018
MY2017-2019 INFINITI QX60 May 18, 2016 (SOP) through May 23, 2018

 

The ABS actuators are unique to the makes and models manufactured during the above dates, as well as the MY2015-2016 Murano Hybrid vehicles produced during August 22, 2014 to July 19, 2016 that are subject to Recall 16V-636.

 

  1. Total Number of Units Potentially Involved:

Approximately 391,479vehicles are subject to this recall, as shown in the table below.  This includes vehicles previously subject to Recall 16V-636 that were repaired and vehicles subject to Recall 18V-601 that have not yet been remedied, or were inspected and determined to not need a repair at that time.

Model Year/Make Model Number of Vehicles
MY2016-2018 Nissan Maxima 82,256
MY2015-2018 Nissan Murano 115,353
MY2017-2019 Nissan Pathfinder 125,119
MY2017-2019 INFINITI QX60 68,751

 

  1. Percentage of Vehicles Estimated to Actually Contain the Defect:

1%[1]

 

  1. Description of the Defect:

Due to manufacturing variation, the subject vehicles (equipped with ADVICS ABS actuators) may contain an oil seal with inadequate sealing performance.  More specifically, die temperature and tension force variation coupled with high temperature vehicle environment can adversely affect oil seal hardness.  These conditions coupled with insufficient lubrication could cause the oil seal to wear prematurely and eventually lead to leakage of brake fluid.  If this occurs, the ABS warning lamp will continuously illuminate on the instrument panel to warn the driver.  However, if the warning is ignored and the vehicle continues to be operated in this condition, the brake fluid leak may potentially create an electrical short in the actuator circuit, which in rare instances, may lead to a fire.

 

  1. Chronology of Principal Events:

August 24, 2016 – Following determination that a manufacturing issue with die temperature variation resulted in oil seal hardness out of specification, Nissan initiated Recall 16V-636 to replace ADVICS ABS actuators equipped with affected oil seals.

August 30, 2018 – Following reports of brake fluid leaks and thermal incidents in vehicles equipped with ABS actuators not subject to Recall 16V-636, Nissan determined that oil seals manufactured at a certain higher recommended die temperature than those previously recalled were also experiencing premature wear.  Nissan initiated Recall 18V601 to replace ABS actuators equipped with affected oil seals.

October 2018 – Nissan received a warranty claim returned actuator with evidence of thermal damage for a vehicle manufactured after the production ranges subject to Recall Number 18V-601.  Nissan began to investigate whether the subject actuator was outside the previously identified affected actuator production and the cause of the condition.

November 2018 to April 2019 – Nissan initiated a parts collection activity and continued field monitoring while actively working with ADVICS to investigate performance differences between the recalled actuators and post countermeasure parts.  Durability testing was conducted on the returned incident part, warranty returns and new production level parts.

May 2019 – August 2019 – Analysis of test results confirmed decreased oil seal hardness and lack of lubrication on the returned parts.  Nissan continued the investigation of oil seal performance of actuators in production to attempt to identify the cause of the decreased oil seal hardness.

Concurrent with this activity, Nissan became aware of additional incidents involving thermal damage of varying extent, and it conducted inspections and testing of these additional returned parts.  Nissan’s testing could not consistently recreate the returned part conditions on production parts, which suggested a need to improve understanding of manufacturing variation.

September 2019 to November 2019 – Analysis of supplier production records indicated greater variation in tension force   than had been previously understood.  Further investigation was initiated to evaluate the extent of impact to oil seal performance. Nissan identified combined factors affecting seal performance: die temperature variation, tension force variation, high temperature vehicle environment, and insufficient lubrication.

In total, Nissan has received seven (7) reports of field incidents involving various degrees of thermal damage for vehicles outside of Recall Number 18V-601 that are potentially attributable to the subject condition.  Nissan is not aware of any injuries or fatalities.  Nissan has not received any claims of ABS Light on for brake fluid leaks or thermal damage for vehicles equipped with the more recent design of ABS actuators using a normally-closed-valve design.

November 4, 2019 – Based on the foregoing, Nissan determined that a safety related defect exists and decided to expand its safety recall campaign to remedy the vehicles outlined above.

 

  1. Description of Corrective Action:

Owners of the subject vehicles will receive an interim notification beginning on December 14, 2019.  Dealers will be notified on November 13, 2019.  The interim notification will instruct owners to park their vehicle outside away from structures and other vehicles and contact Nissan on INFINITI Roadside Assistance to have their vehicle towed to the dealer as soon as possible if their ABS warning light is illuminated for 10 seconds or longer.   If the ABS warning light is illuminated, the dealer will replace the ABS actuator with a new design part at no cost to the owner.

When additional remedy parts are available in summer 2020 owners will receive a second notification advising them to bring their vehicles into the dealer for repair.  The dealer will replace the ABS actuator with a new design, at no cost to the owner.

Nissan will include a statement in the Part 577 owner notification concerning reimbursement for the cost of obtaining a pre-notification remedy for the subject vehicles that are no longer under warranty. Your office will be provided with a copy of the Part 577 owner notification for approval.

 

  1. Copy of Notices:

Copies of all notices will be provided to NHTSA as they become available.

[1] Nissan anticipates the estimated percentage of vehicles involved with defect is very low.  Only three (3) warranty returned parts exhibited the subject condition out of the affected population of vehicles.  1% is used here because submission within NHTSA’s safety portal will not allow a non‐numeric value.

 


November 8, 2019

 

Mr. Jeff Giuseppe
Associate Administrator for Enforcement
National Highway Traffic Safety Administration
Attn: Recall Management Division (NVS-215)
Room W48-302
1200 New Jersey Avenue, SE
Washington, D.C. 20590

Dear Mr. Giuseppe:

We are transmitting the enclosed Defect Information Report in accordance with 49 CFR Part 573.

Please note that this Defect Information Report includes certain vehicles that were previously subject to Recall 18V-601.  Vehicles subject to 18V-601 that have not yet been remedied, or were inspected and determined to not need a repair, will be added to this new recall campaign.  However, Nissan Murano Hybrid vehicles continue to be subject to Recall 18V-601 and will not be added to this recall campaign.

 

Very truly,

 

Derek Latta
Manager,
Technical Compliance

 

Encl.

 

DEFECT INFORMATION REPORT

 

  1. Vehicle Manufacturer:

Nissan North America, Inc., Canton Plant
Nissan North America, Inc., Smyrna Plant

 

Manufacturer of the subject equipment:

ADVICS North America, Inc.
1650 Kingsview Drive
Lebanon, Ohio 45036

 

James Cole
Corporate Quality Manager
513-696-5467 (Direct Line)
513-696-5451 (Fax)
859-512-0338 (Cell)

 

Anti-Lock Brake System (ABS) actuator part numbers:

Model Year/Make Model Part Description Part Number
MY2016-2018 Nissan Maxima ABS ACTUATOR ASSY 47660-4RB1C
MY2015-2018 Nissan Murano ABS ACTUATOR ASSY – AWD 47660-9UD6D
MY2015-2018 Nissan Murano ABS ACTUATOR ASSY – FWD 47660-9UD6C
MY2017-2019 Nissan Pathfinder ABS ACTUATOR ASSY 47660-9PP1B
MY2017-2019 Nissan Pathfinder ABS ACTUATOR ASSY 47660-9PP1D
MY2017-2019 INFINITI QX60 ABS ACTUATOR ASSY 47660-9PP1B
MY2017-2019 INFINITI QX60 ABS ACTUATOR ASSY 47660-9PP1D
Brake Fluid Brake Fluid (DOT 3 Type 12oz) 999MP-A4100P
 

 

 

 

 

  1. Units Potentially Involved:

Production period of affected vehicles involved:

Model Year/Make Model Dates of Manufacture
MY2016-2018 Nissan Maxima February 10, 2015 (SOP) through May 22, 2018 (02/10/15 to 01/05/17 were subject to 18V-601)
MY2015-2018 Nissan Murano August 22, 2014 (SOP) through May 31, 2018 (08/22/14 to 02/24/2017 were subject to 18V-601)
MY2017-2019 Nissan Pathfinder April 20,2016 (SOP) through May 23, 2018
MY2017-2019 INFINITI QX60 May 18, 2016 (SOP) through May 23, 2018

 

The ABS actuators are unique to the makes and models manufactured during the above dates, as well as the MY2015-2016 Murano Hybrid vehicles produced during August 22, 2014 to July 19, 2016 that are subject to Recall 18V-601.

 

  1. Total Number of Units Potentially Involved:

Approximately 394,025 vehicles are subject to this recall, as shown in the table below.  This includes vehicles previously subject to Recall 18V-601 that have not yet been remedied, or were inspected and determined to not need a repair, that are now included.

Model Year/Make Model Number of Vehicles
MY2016-2018 Nissan Maxima 82,374
MY2015-2018 Nissan Murano 115,518
MY2017-2019 Nissan Pathfinder 126,579
MY2017-2019 INFINITI QX60 69,554

 

  1. Percentage of Vehicles Estimated to Actually Contain the Defect:

1%[1]

 

  1. Description of the Defect:

Due to manufacturing variation, the subject vehicles (equipped with ADVICS ABS actuators) may contain an oil seal with inadequate sealing performance.  More specifically, die temperature variation coupled with poor tension force of the oil seal and high temperature vehicle environment, can adversely affect oil seal hardness.  These conditions could cause the oil seal to wear prematurely and eventually lead to leakage of brake fluid.  If this occurs, the ABS warning lamp will continuously illuminate on the instrument panel to warn the driver.  However, if the warning is ignored and the vehicle continues to be operated in this condition, the brake fluid leak may potentially create an electrical short in the actuator circuit, which in rare instances, may lead to a fire.

 

  1. Chronology of Principal Events:

Nissan will supplement this chronology of principal events.

 

  1. Description of Corrective Action:

Owners of the subject vehicles will receive an interim notification beginning on December 2, 2019.  Dealers will be notified on November 12, 2019.  The interim notification will instruct owners to park their vehicle outside and contact Nissan on INFINITI Roadside Assistance to have their vehicle towed to the dealer as soon as possible if their ABS warning light is illuminated for 10 seconds or longer.   If the ABS warning light is illuminated, the dealer will replace the ABS actuator with a new design part at no cost to the owner.

When additional remedy parts are available in summer 2020 owners will receive a second notification advising them to bring their vehicles into the dealer for repair.  The dealer will replace the ABS actuator with a new design part, at no cost to the owner.

Nissan will include a statement in the Part 577 owner notification concerning reimbursement for the cost of obtaining a pre-notification remedy for the subject vehicles that are no longer under warranty. Your office will be provided with a copy of the Part 577 owner notification for approval.

 

  1. Copy of Notices:

Copies of all notices will be provided to NHTSA as they become available.

[1] Nissan anticipates the estimated percentage of vehicles involved with defect is very low.  Only three (3) warranty returned parts exhibited the subject condition out of the affected population of vehicles.  1% is used here because submission within NHTSA’s safety portal will not allow a non‐numeric value.

 

 



13 Affected Products

Vehicles

MAKE MODEL YEAR
INFINITI QX60 2017-2019
NISSAN MAXIMA 2016-2018
NISSAN MURANO 2015-2018
NISSAN PATHFINDER 2017-2019

 


38 Associated Documents

Remedy Instructions and TSB

RCRIT-19V807-0013.pdf 2757.503KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.63 MB]

 


AMENDED DEFECT INFORMATION REPORT

RMISC-19V807-3135.pdf 491.825KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [480.30 KB]

 


Recall 573 Report-Amendment 1

RCLRPT-19V807-7676.PDF 216.033KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.97 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-0782.pdf 1501.882KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.43 MB]

 


Remedy Instructions and TSB

RCRIT-19V807-9777.pdf 1599.748KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.53 MB]

 


Recall Quarterly Report #1, 2019-4

RCLQRT-19V807-0727.PDF 211.144KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.20 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-19V807-7222.pdf 453.201KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [442.58 KB]

 


Manufacturer Notices(to Dealers,etc) – REVISION 2

RCMN-19V807-4198.pdf 457.392KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [446.67 KB]

 


Manufacturer Notices(to Dealers,etc) – REVISION 1

RCMN-19V807-3122.pdf 281.039KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [274.45 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-6231.pdf 2765.145KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.64 MB]

 


Remedy Instructions and TSB

RCRIT-19V807-1431.pdf 339.361KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [331.41 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-7585.pdf 397.062KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [387.76 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-3240.pdf 2713.752KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.59 MB]

 


Remedy Instructions and TSB

RCRIT-19V807-4253.pdf 124.769KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [121.84 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-2963.pdf 2772.963KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.64 MB]

 


Remedy Instructions and TSB

RCRIT-19V807-6414.pdf 125.189KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [122.25 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-1675.pdf 130.664KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [127.60 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-0322.pdf 129.711KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [126.67 KB]

 


Manufacturer Notices(to Dealers,etc) – NISSAN CAMPAIGN BULLETIN Anti-lock Braking System (ABS) Actuator Voluntary Safety Recall Campaign Reference: R1916 and R1920 Date: November 13, 2018

RCMN-19V807-4021.pdf 513.878KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [501.83 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-5398.pdf 2641.524KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.52 MB]

 


Remedy Instructions and TSB

RCRIT-19V807-2329.pdf 3281.595KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [3.13 MB]

 


Manufacturer Notices(to Dealers,etc) – INFINITI CAMPAIGN BULLETIN Anti-lock Braking System (ABS) Actuator Voluntary Safety Recall Campaign Reference: R1917 & R1921 Date: November 13, 2019

RCMN-19V807-1738.pdf 286.39KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [279.68 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-3733.pdf 3254.393KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [3.10 MB]

 


ISSUED Interim Owner Notification Letter(Part 577)

RIONL-19V807-4710.pdf 219.007KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [213.87 KB]

 


Owner Notification Letter(Part 577)

RCONL-19V807-8583.pdf 217.986KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [212.88 KB]

 


DEFECT INFORMATION REPORT

RMISC-19V807-7934.pdf 489.027KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [477.57 KB]

 


Recall Acknowledgement

RCAK-19V807-8089.pdf 419.949KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [410.11 KB]

 


Defect Notice 573 Report

RCLRPT-19V807-3659.PDF 215.987KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.92 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-2477.pdf 3157.535KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [3.01 MB]

 


Manufacturer Notices(to Dealers,etc) – NISSAN REVISION 3 – R1916_R1920 Maxima_Murano_Pathfinder ABS Actuator – VSRC – Dealer Announcement

RCMN-19V807-5430.pdf 1641.348KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.57 MB]

 


Manufacturer Notices(to Dealers,etc) – INFINITI CAMPAIGN BULLETIN Anti-lock Braking System (ABS) Actuator Voluntary Safety Recall Campaign Reference: R1917 & R1921 Date: September 11, 2020

RCMN-19V807-0998.pdf 399.373KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [390.01 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-9457.pdf 79.997KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [78.12 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-9569.pdf 49.083KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [47.93 KB]

 


Remedy Instructions and TSB

RCRIT-19V807-2187.pdf 2727.844KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.60 MB]

 


Manufacturer Notices(to Dealers,etc) – REVISION 3 – R1917_R1921 QX60 ABS Actuator – VSRC – Dealer Announcement

RCMN-19V807-0715.pdf 442.264KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [431.90 KB]

 


Manufacturer Notices(to Dealers,etc) – REVISION 4 – R1916_R1920 Maxima_Murano_Pathfinder ABS Actuator – VSRC – Dealer Announcement

RCMN-19V807-5866.pdf 1710.178KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.63 MB]

 


Recall Quarterly Report #3, 2020-2

RCLQRT-19V807-6688.PDF 211.337KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.38 KB]

 


Recall Quarterly Report #4, 2020-3

RCLQRT-19V807-1522.PDF 211.446KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.49 KB]

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V807&docType=RCL

 


 

Bestseller No. 1
LUCAS OIL 10826 Brake Fluid - 1 Quart
  • High quality blend of polyethylene glycol ethers and additives
  • Compatible with all brake system rubber components and other brake fluids
  • Prevents seal hardening or softening
  • Protects against rust and corrosion
  • Provides excellent lubricity
SaleBestseller No. 2
BOSCH ESI6-32N Brake Fluid (Direct Replacement for DOT 3, DOT 4, and DOT 5.1) - 1 Quart
  • High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
  • Extended Service Interval (ESI): Lasts 100 percent longer than DOT 3, 50 percent longer than DOT 4, and 10 percent longer than DOT 5. 1
  • Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
  • Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
  • Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
Bestseller No. 3
Prestone AS401 DOT 3 Synthetic Brake Fluid - 32 oz.
  • Provides an extra margin of safety in extreme braking conditions
  • Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
  • Excellent for ABS, disc and drum brake systems
  • Delivers braking power when needed by avoiding a spongy pedal
  • Both wet and dry boiling points exceed the minimum government standards
Bestseller No. 4
Quicksilver 8M0128415 DOT 4 Brake Fluid – 12 Ounce
  • The 336⁰F wet boil point and 521⁰F dry boil point exceeds common characteristics for DOT 4 brake fluids
  • Provides corrosion protection in brake components
  • Matches needs of all DOT 4 manufacturer recommendations
  • Compatible with all DOT 3 and DOT 4 applications
Bestseller No. 5
Johnsen's 2234 Premium DOT-3 Brake Fluid - 1 Gallon
  • Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
  • Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
  • Mixes with all DOT 3 approved brake fluids
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 6
ACDelco GM Original Equipment 10-4110 DOT 3 Hydraulic Brake Fluid - 16 oz
  • Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
  • High boiling point to minimize brake fluid boiling and vapor lock
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
SaleBestseller No. 7
ATE Original TYP 200 Racing Quality DOT 4 Brake Fluid, 1 Liter Can
  • Minimal decrease of boiling point due to excellent water locking properties
  • Non-foaming when filling and bleeding the brake system
  • Excellent corrosion protection due to selected additives
  • High safety tolerance against steam bubbles
  • Makes brake fluid changing intervals of up to 3 years possible
Bestseller No. 8
Wagner DOT 3 21B Brake Fluid, 32 oz; 946 ml
  • Maintains proper movement for safe, effective stopping performance
  • Helps deliver a quieter braking system
  • Produces smoother pedal travel
  • Provides longer brake life and performance
  • Install Wagner with total confidence
SaleBestseller No. 9
Johnsen's 5034 Premium Synthetic DOT-4 Brake Fluid - 1 Gallon
  • Synthetic quality brake fluid
  • Contains special ingredients to guard against vapor lock and moisture absorption
  • Exceeds requirements for both DOT 3 and DOT 4 brake fluids
  • Specially formulated for DOT 4 brake fluid applications
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 10
STP Heavy Duty Brake Fluid, Dot 3 Brake Fluid Protects Brake Systems, ABS, Disc and Drum Systems, 12 Oz, STP
  • Helps provide protection against brake failure from vapor lock
  • Helps prevent corrosion in brake system
  • Works with all brake system requiring DOT 3 fluids
  • Exceeds federal motor vehicle safety standard No. 116
  • Meets SAE spec. J1703.

Last update on 2024-07-13 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...