RECALL CAMPAIGN BULLETIN
| Classification: | Reference: | Date: |
| WT21-002 | NTB21-024 | March 17, 2021 |
VOLUNTARY SAFETY RECALL CAMPAIGN
2021 ROGUE; WHEEL NUT INSPECTION AND REPLACEMENT
| CAMPAIGN ID #: | PC799 |
| APPLIED VEHICLES: | 2021 Rogue (T33) |
Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility.
INTRODUCTION
Nissan
is conducting this voluntary safety recall campaign, on certain specific model year 2021 Rogue vehicles, to inspect and, if necessary, replace the wheel nuts. This service will be performed at no charge to the customer for parts or labor.
IDENTIFICATION NUMBER
Nissan
has assigned identification number PC799 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan
strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
SERVICE PROCEDURE
- If the vehicle is equipped with the wheel nuts shown in Figure 1 and Figure 2, no further action is needed. The service procedure is complete; proceed to CLAIMS INFORMATION on page 3.
- If the vehicle is equipped with the wheel nuts shown in Figure 3 and Figure 4, continue to step 2 on page 3.
- Place the vehicle on a lift and raise to a suitable height.
- Wheel nut torque: 112.55 Nm
(11 kg-m, 83 ft-lb)
- Lower the vehicle and proceed to CLAIMS INFORMATION.
PARTS INFORMATION
| DESCRIPTION | PART NUMBER | QUANTITY |
| NUT – ROAD WHEEL
(Wheel nut) | 40224-ZN50A
Nissan Genuine Accessories 40224-ZN50A Closed End Lug Nut
| 5 per wheel
(20 max, if needed) |
CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
| CAMPAIGN (“CM”) ID | DESCRIPTION | OP CODE | FRT |
| PC799 | Inspect All 5 Wheel Nuts on All 4 Wheels | PC7990 | 0.2 hr |
| Inspect and Replace Wheel Nuts on 2 | PC7991 | 0.3 hr | |
| Inspect and Replace Wheel Nuts on All 4 | PC7992 | 0.4 hr |
AMENDMENT HISTORY
| PUBLISHED DATE | REFERENCE | DESCRIPTION |
| March 17, 2021 | NTB21-024 | Original bulletin published |
Remedy Instructions and TSB
RCRIT-21V186-7727.pdf 328.834KB
- SPECIFICATION: M12 x 1.25 thread - closed chrome end lug nut - conical 60 degree seat -3/4" (19 mm) Hex -35 mm length -22 mm width, After Please check the wheel seat before purchasing, lug nuts are not fit for OEM factory and 90 degree mag seat wheel
- VEHICLE FITMENT: Compatible with 1993-2021 Nissan
Altima, 1988-2021 Maxima, 2004-2019 Titan, 1987-2015 Nissan
Pathfinder, 2000-2022 Subaru Outback as a substitute. Not suitable for factory wheels, only suitable for the after-sales market - ONE-PIECE DESIGN: One piece lug nuts compared with other two-piece nuts, can effectively prevent cracking and ensure the safety of driving, tight fit between thread and bolt. It's safety and service life absolutely to exceed your expectations
- ANTI-RUST & DURABLE: Triple chrome lug nuts, cold-forged and heat-treated steel process is anti-cracking and anti-rust, which greatly prolongs the use time. Ensure the tight fit between precision processed nut thread and bolt to ensure safety
- INTIMATE SERVICE: We provide with 12 months customer service. If you have any questions before or after purchasing, we will provide you with assistance and service
- SPECIFICATION: Closed end lug nuts with M12 x 1.25 thread , 13/16'' (21mm) hex - 1.47" (37mm) hight - 1.2" (30mm) width, flat 90 degree Mag Seat. Only fit for OEM wheel flat seat! If your car has conical seat or wheel cap, Please DO NOT buy this set
- VEHICLE FITMENT: Replacement for 2002-2024 Nissan
Altima, 1988-2023 Maxima, 2012-2024 Pathfinder, 2008-2023 Rogue, 2013-2024 Infiniti
Q50, 2008-2015 G37, 2014-2024 QX60, 2013-2024 QX50 and more. See below for full and exact fitment information - ONE-PIECE DESIGN: One piece lug nuts compared with other two-piece nuts, can effectively prevent cracking and ensure the safety of driving, tight fit between thread and bolt. It's safety and service life absolutely to exceed your expectations
- ANTI-RUST & DURABLE: Triple chrome lug nuts, cold-forged and heat-treated steel process is anti-cracking and anti-rust, which greatly prolongs the use time. Ensure the tight fit between precision processed nut thread and bolt to ensure safety
- INTIMATE SERVICE: We provide with 12 months customer service. If you have any questions before or after purchasing, we will provide you with assistance and service
- 【Perfect Fit】The 20pcs lug nuts are compatible with 1993-2022 Nissan
Altima, 1988-2022 Nissan
Maxima, 1993-2017 Nissan
Quest, 2008-2023 Nissan
Rogue, 1982-2022 Nissan
Sentra. - 【Perfect Fit】The 20pcs lug nuts are compatible with 2013-2022 Infiniti
Q70, 1989-2006 Infiniti
Q45, 2013-2022 Infiniti
Q50. - 【Specification】Our lug nuts feature M12X1.25-21mm(13/16), closed-end bulge style design, with conical 90-degree seat-21mm hex-37mm long-30mm wide. They meet vehicle standards, are easy to install, and have a striking appearance.
- 【Superior Material】Made from high strength and durable cold-forged alloy steel, these lug nuts have a clear and clean pitch thread that provides a safer and more reliable closed-end nut than any other on the market. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- 【Triple Chrome & Anti-rust】These lug nuts feature a triple chrome finish that's resistant to rust and have passed 72 hours of salt spray testing. They're cold-forged and heat-treated, making them strong, durable, and stunning to look at.
- SET OF 20 LUG NUTS: This package includes 20 Orion Motor Tech M12 x 1.25 lug nuts with a mag seat (1.46" long by 1.18" wide), a socket, and instructions for use to get all your wheels back on the road as soon as possible
- VEHICLE FITMENT: These 12mmx1.25 wheel nuts compatible with Nissan
: 2002-2022 Altima, 2009-2022 GT-R
, 1988-2022 Maxima, 2003-2021 Murano, 2012-2022 Pathfinder, 2008-2022 Rogue, Infiniti
: 2013-2022 Q50 Q60 Q70 QX50 QX60 QX70 - CHROME-PLATED PREMIUM STEEL: Our mag lug nuts are each made from a single piece of premium steel that has been cold-forged and heat treated for superior strength and longevity; their chrome plating further improves their corrosion resistance
- THOROUGHLY TESTED: These lug nuts have undergone proof load, salt spray, hardness, and thread checks to meet and even exceed OEM quality and performance standards
- EASY INSTALLATION AND REMOVAL: Enjoy hassle-free tire changes with our lug nuts, designed for quick and effortless installation and removal, whether you're a mechanic or a DIY enthusiast
- Direct replacement - these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit - available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an “i” in a blue circle, additional verification is needed. Please hover over the "i" to verify fitment notes match your vehicle.
This product presentation was made with AAWP plugin.






