RECALL CAMPAIGN BULLETIN
| Classification: | Reference: | Date: |
| WT21-002 | NTB21-024 | March 17, 2021 |
VOLUNTARY SAFETY RECALL CAMPAIGN
2021 ROGUE; WHEEL NUT INSPECTION AND REPLACEMENT
| CAMPAIGN ID #: | PC799 |
| APPLIED VEHICLES: | 2021 Rogue (T33) |
Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility.
INTRODUCTION
Nissan is conducting this voluntary safety recall campaign, on certain specific model year 2021 Rogue vehicles, to inspect and, if necessary, replace the wheel nuts. This service will be performed at no charge to the customer for parts or labor.
IDENTIFICATION NUMBER
Nissan has assigned identification number PC799 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
SERVICE PROCEDURE
- If the vehicle is equipped with the wheel nuts shown in Figure 1 and Figure 2, no further action is needed. The service procedure is complete; proceed to CLAIMS INFORMATION on page 3.
- If the vehicle is equipped with the wheel nuts shown in Figure 3 and Figure 4, continue to step 2 on page 3.
- Place the vehicle on a lift and raise to a suitable height.
- Wheel nut torque: 112.55 Nm
(11 kg-m, 83 ft-lb)
- Lower the vehicle and proceed to CLAIMS INFORMATION.
PARTS INFORMATION
| DESCRIPTION | PART NUMBER | QUANTITY |
| NUT – ROAD WHEEL
(Wheel nut) | 40224-ZN50A
Nissan Genuine Accessories 40224-ZN50A Closed End Lug Nut
| 5 per wheel
(20 max, if needed) |
CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
| CAMPAIGN (“CM”) ID | DESCRIPTION | OP CODE | FRT |
| PC799 | Inspect All 5 Wheel Nuts on All 4 Wheels | PC7990 | 0.2 hr |
| Inspect and Replace Wheel Nuts on 2 | PC7991 | 0.3 hr | |
| Inspect and Replace Wheel Nuts on All 4 | PC7992 | 0.4 hr |
AMENDMENT HISTORY
| PUBLISHED DATE | REFERENCE | DESCRIPTION |
| March 17, 2021 | NTB21-024 | Original bulletin published |
Remedy Instructions and TSB
RCRIT-21V186-7727.pdf 328.834KB
- We are Different: After 72 hours of strict salt spray test, makes the nut resistant to oxygen and corrosion, gives the nut a bright visual impact. Using infrared drying technology, the paint is integrated with the metal and will not fall off easily
- Vehicle Models: Replacement for 1993-2022 Nissan Altima, 1988-2023 Maxima, 2012-2024 Pathfinder, 2008-2023 Rogue, 2006-2024 Sentra, 1994-2024 Subaru Outback, 1994-2024 Forester. Does not fit factory wheels, works with aftermarket only
- Specifications: M12x1.25 thread - closed end bulge style lug nuts - conical 60 degree seat - 3/4" 19mm hex - 1.38" 35.05mm long - 0.87" 22mm wide - color: silver/chrome. Innovative design in appearance, thread fully meet vehicle standards
- One-Piece Nuts: The one-piece structure design is more splendid and safer than the two-piece design. Thick coating, cold forged and heat treated steel soild lug nuts, anti-rusting and anti-stripped, high strength and durability
- Brand Support: At MIKKUPPA, we are dedicated to delivering top-quality wheel lug nuts and exceptional customer service. Our commitment to enthusiastic support for 12 months ensures a worry-free shopping experience
- [APPLICABLE VEHICLE]: OEM factory lug nuts replacement for 2002-2024 Nissan Altima, 1988-2023 Maxima, 2012-2024 Pathfinder, 2008-2023 Rogue, 2006-2024 Sentra, 2000-2015 Xterra. More detailed compatible models are available in the image content, please confirm your model and year before placing an order.(Note:Do NOT Fit Cone Wheel, Mag/Flat Seat Stock Stock Wheel Only)
- [SPECIFICATION]: 20Pcs lug nuts set with M12x1.25 thread pitch - 1.47inch(37mm) height - 13/16inch(21mm) hex - 1.2inch(30mm) width - closed end - mag seat - chrome one-piece lug nuts
- [STRICT PROCESSING]: Sposuit lug nuts uses triple chrome plating technology to further enhance their corrosion resistance, and the process of cold forging and heat treatment steel to increase its strength. Precise processing maximizes the service life
- [PRECISION DESIGN]: Our lug nuts adopts an one-piece structure and closed-end design, which can effectively prevent cracking. Strict manufacturing standards and factory testing ensure its tightness and quality
- [SATISFACTION PROMISE]: Ensuring customer satisfaction is our goal. If you have any questions, please contact us. We are committed to serving you with dedication
- SPECIFICATION: Closed end lug nuts with M12 x 1.25 thread , 13/16'' (21mm) hex - 1.47" (37mm) hight - 1.2" (30mm) width, flat 90 degree Mag Seat. Only fit for OEM wheel flat seat! If your car has conical seat or wheel cap, Please DO NOT buy this set
- VEHICLE FITMENT: Replacement for 2002-2024 Nissan Altima, 1988-2023 Maxima, 2012-2024 Pathfinder, 2008-2023 Rogue, 2013-2024 Infiniti Q50, 2008-2015 G37, 2014-2024 QX60, 2013-2024 QX50 and more. See below for full and exact fitment information
- ONE-PIECE DESIGN: One piece lug nuts compared with other two-piece nuts, can effectively prevent cracking and ensure the safety of driving, tight fit between thread and bolt. It's safety and service life absolutely to exceed your expectations
- ANTI-RUST & DURABLE: Triple chrome lug nuts, cold-forged and heat-treated steel process is anti-cracking and anti-rust, which greatly prolongs the use time. Ensure the tight fit between precision processed nut thread and bolt to ensure safety
- INTIMATE SERVICE: We provide with 12 months customer service. If you have any questions before or after purchasing, we will provide you with assistance and service
- [Vehicle Fitment-1]: Compatible with Nissan 720 1983-1986, 200SX 1984-1988/1995-1998, 240SX 1989-1998, 300ZX 1984-1986/1990-1996, 350Z 2003-2009, Altima 1997-2008, Armada 2005-2009, Cube 2009-2014, D21 1986-1994, Frontier 1998-2010/2021, GT-R 2009-2021, Juke 2011-2017, Leaf 2011-2013, Maxima 1984-2008, Murano 2003-2007/2009-2014, NX 1991-1993, Pathfinder 1987-2010, PathfindeArmada 2004, Pickup 1995-1997, Pulsar 1983, PulsaNX 1983-1986
- [Vehicle Fitment-2]: Compatible with Infiniti G20 1991-1996/1999-2002, G35 2003-2007, I30 1996-2001, M35 2006-2010, M45 2006-2010, Q45 1997-2002/2003-2006, QX4 1997-2003; Compatible with RoguSport 2021, Stanza 1982-1989, Sentra 1984-2013, Titan 2004-2010, Van 1987-1988, Versa 2007-2013, Xterra 2000-2010, X-Trail 2005-2006, Quest 2004-2009/2011-2017, Rogue 2008-2022, RoguSelect 2014-2015
- [Reference Number]: 611-114.1, 611-114, 611-114-BP, 98961.1, 40224ZN50A, 40224V5510, 402242DX0A
- [Specifications]: ① Hex Size: 21 mm; ② Overall Length: 1.142 inch; ③ Thread Diameter: 12 mm; ④ Thread Pitch: 1.25 mm; ⑤ Thread Size: M12-1.25; ⑥ Thread Direction: Clockwise (Right); ⑦ Material: Steel; ⑧ Location: One Wheel; ⑨ Wheel Nut Style: Acorn; ⑩ Quantity Sold: A Set of Four Pieces
- [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted M12-1.25 wheel lug nuts. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind
- SET OF 20 LUG NUTS: This package includes 20 Orion Motor Tech M12 x 1.25 lug nuts with a mag seat (1.46" long by 1.18" wide), a socket, and instructions for use to get all your wheels back on the road as soon as possible
- VEHICLE FITMENT: These 12mmx1.25 wheel nuts compatible with Nissan: 2002-2022 Altima, 2009-2022 GT-R, 1988-2022 Maxima, 2003-2021 Murano, 2012-2022 Pathfinder, 2008-2022 Rogue, Infiniti: 2013-2022 Q50 Q60 Q70 QX50 QX60 QX70
- CHROME-PLATED PREMIUM STEEL: Our mag lug nuts are each made from a single piece of premium steel that has been cold-forged and heat treated for superior strength and longevity; their chrome plating further improves their corrosion resistance
- THOROUGHLY TESTED: These lug nuts have undergone proof load, salt spray, hardness, and thread checks to meet and even exceed OEM quality and performance standards
- EASY INSTALLATION AND REMOVAL: Enjoy hassle-free tire changes with our lug nuts, designed for quick and effortless installation and removal, whether you're a mechanic or a DIY enthusiast
This product presentation was made with AAWP plugin.






