2007 Infiniti M35

Voluntary Safety Recall Campaign 2006-2007 Infiniti M; Front Passenger Air Bag Inflator

by
Classification:Reference: Date:
RS17-028dITB17-024dJanuary 15, 2020

 

VOLUNTARY SAFETY RECALL CAMPAIGN

2006-2007 M; FRONT PASSENGER AIR BAG INFLATOR

 

This bulletin has been amended. See AMENDMENT HISTORY on page 32.

Please discard previous versions of this bulletin.

 

CAMPAIGN ID #s:R1622, R1701, R1704, R1706, R1707
NHTSA #s:15V-226, 16V-349, 17V-028
APPLIED VEHICLES:2006-2007 M (Y50)

 

Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility.

 

INTRODUCTION

Infiniti is conducting a Voluntary Safety Recall Campaign on certain specific model year 2006-2007 M vehicles to replace the passenger front air bag module and inflator. This service will be performed at no charge to the customer for parts or labor.

Takata has issued return packaging, shipping labels, documents, and directions that must be used and followed in order to properly carry out this campaign. Takata’s documentation is attached and is part of this bulletin.

 

IDENTIFICATION NUMBER

Infiniti has assigned identification numbers R1622, R1701, R1704, R1706, and R1707 to this campaign. Use Service COMM and the VIN to confirm the correct campaign ID number. The correct number must appear on all communication and documentation of any nature dealing with this campaign.

 

RETAILER RESPONSIBILITY

It is the retailer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a retailer’s inventory. Federal law requires that new vehicles in retailer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Infiniti strongly encourages retailers to correct any used vehicles in their inventory before they are retailed.

 

REPAIR OVERVIEW

Use Service COMM or Dealer Business Systems (DBS)
National Service History to confirm this campaign applies
(see Campaign ID #s on page 1)

↓

Register the new front passenger air bag inflator
and new module
(see Register the New Inflator)

↓

Replace the front passenger air bag module and inflator
(see Service Procedure and Parts Information)
To help avoid damage, refer to
Instrument Panel Removal Tips

↓

Return the old front passenger air bag inflator
(see page 33)

↓

End

 

REQUIRED SPECIAL TOOLS

Air Bag Module Support (J-51315-KIT)

Quick Scan Tool (J-52352)

 

  • Each retailer has been shipped one Quick Scan Tool (J-52352).

 

 

SERVICE PROCEDURE

Register the New Inflator and the New Module

  1. Obtain a new inflator and a new module kit from your parts department.

 

  • New inflator and new module kit are listed in the Parts Information.

 

  1. Attach the quick scan tool (J-52352) to your CONSULT PC USB port.

 

  1. On the left side of the ASIST main menu, select Tech Support Info, then Inventory Vehicle Actions.

 

  1. Select CLICK HERE (Air Bag to VIN Registration).

 

Register the New Inflator

 

  1. Use the quick scan tool to scan the bar code (VIN) on the vehicle B-pillar label.

 

NOTE:

  • Some labels may not scan quickly.

 

  • Hold the scan tool approximately 6 inches away from the label.

 

  • Hold the trigger down until the label is read (this may take several seconds).

 

  • The VIN will automatically populate (see Figure 4

 

  • If needed, VIN can be entered manually.

 

  1. Use the quick scan tool to scan the bar code (serial number) on the side of the box of the new inflator (see Figures 6 and 7).

 

  • The serial number will automatically populate (see Figure 5).

 

NOTE: DO NOT scan the part number label.

 

NOTE: If needed, the serial number can be entered manually.

 

  1. Select Submit on the ASIST screen (see Figure 5 on the previous page).

 

Register the New Module

 

  1. Use the quick scan tool and scan the bar code (VIN) on the vehicle B-pillar label a second time.

 

NOTE:

  • Some labels may not scan quickly.

 

  • Hold the scan tool approximately 6 inches away from the label.

 

  • Hold the trigger down until the label is read (this may take several seconds).

 

  • The VIN will automatically populate (see Figure 8 Figure 9 on the next page).

 

  • If needed, VIN can be entered manually.
  1. Open the Module Kit shipping container.

 

  • New module is included in the Module Kit.

 

  1. Locate the bar code sticker on the new module.

 

NOTE: The new module will be left in the shipping container until later in this procedure.

 

  1. Use the quick scan tool to scan the bar code (serial number) on the new module (see Figures 10 and 11).

 

  • The serial number will automatically populate (see Figure 9).

 

NOTE: If needed, the serial number can be entered manually.

 

  1. Select Submit on the ASIST screen (see Figure 9 on the previous page).

 

Inflator and Module Replacement

 

IMPORTANT:

  • Follow all cautions, warnings, and notes in the Electronic Service Manual (ESM) when working on or near a Supplemental Restraint System (SRS), such as an air bag.  To help avoid damage, refer to Instrument Panel Removal Tips starting on the next page.

 

CAUTION: Handle interior trim carefully to avoid damage. Work with clean hands and clean tools to avoid dirt and stains. Use protective covers as needed.

 

  1. Write down the radio settings.

 

  1. Turn the ignition OFF.

 

  1. Disconnect both battery cables, negative cable first.

 

  1. Wait at least 3 minutes.

 

  1. Remove the passenger air bag module (module) from the vehicle.

 

  • Refer to the ESM, Section RS-Restraint System, for module removal.

 

  • Refer to Instrument Panel Removal Tips starting on the next page.

 

  1. Once removed, set the module in a clean working area.

 

  • Go to page 18.

 

Instrument Panel Removal Tips

NOTE: To remove the module, the instrument panel needs to be removed. Refer to the tips on the next few pages to help avoid damage to the grilles and instrument panel.

Upper ventilator grille:

 

  • Carefully pry with a suitable plastic trim tool.

 

  • When there is enough of a gap, insert a second plastic trim tool to unsnap more pawls.

 

  • When able, unsnap the remaining pawls by hand, and then remove the upper ventilator grille.

 

Center ventilator grille:

  • Place plastic inserts or similar material between the sides of the center ventilator grille and instrument panel pad.

 

    • This will keep the center ventilator grille locator tabs from “catching” the instrument panel pad during removal.

 

    • See Figure 16 for samples of plastic inserts.

 

  • See location of locator tabs and where they fit in the instrument panel pad in Figure 17 and 18.

 

  • Grab the center ventilator grille, and then pull up.

 

CAUTION: Removing the center ventilator grille in a direction other than up may cause damage to its lower pawls, or instrument panel pad.

 

Side ventilator grilles:

  • Remove the screw at the side of each side ventilator grille.

 

  • Place plastic inserts or similar material between the sides of the side ventilator grilles and instrument panel pad.

 

    • LH side ventilator grille shown.

 

    • See Figure 16 for samples of plastic inserts.

 

  • See location of pawls and related locator tabs and where they fit in the instrument panel pad in Figure 21, 22, and 23.

 

  • Remove the side ventilator grille as shown in Figure 24.

 

CAUTION: Removing the side ventilator grilles in a different manner may cause damage to it or the instrument panel pad.

 

Front defroster grilles:

  • Carefully unfasten/disconnect/remove the sensors in both LH and RH defroster grilles.

 

    • Use a pick or other similar tool. Do not pry on the defroster grille, simply pull up.

 

  • Place a plastic insert or similar material

    between the defroster grille and instrument

    panel pad.

 

    • This will keep the defroster grille from “catching” onto the instrument panel pad.

 

    • Examples of plastic inserts shown in Figure 16 can be used.

 

    • With the same type or similar tool used in Figure 26, hook under the defroster grille, and then carefully pull up.

 

  • When able, take hold of the defroster grille, and then slide the plastic insert in the direction of (carefully) lifting up and unsnapping the pawls.

 

  • If the pawls will not release, use a suitable pick and gently pry them loose (toward the defroster grille’s opening).

 

  1. Securely mount the air bag module support (support) in a vice (see Figure 30 and 31).

 

WARNING:

  • Work from behind and to the sides of the support.

 

  • Wear safety glasses while performing inflator replacement.

 

  1. Unclip the harness from the harness guides.

 

  1. Attach the FX brackets to the support as shown.

 

    • Make sure the convex parts of the brackets are in the UP position.
    • Use bolts and nuts supplied with the support.

 

    • Leave the bolts/nuts slightly loose to allow for positioning of the module.

 

  1. Attach the module to the FX brackets in the support as shown.

 

    • Use bolts and nuts supplied with the support.

 

    • Make sure the arrow on the bag is pointing down.

 

  1. Make sure the module is centered in the support.

 

NOTE: Centering the module in the support will allow access to the inflator securing nuts through the slots in the support.

 

  1. Tighten all of the mounting bolts and nuts that hold the module and brackets to the support.

 

WARNING: Work from behind and to the sides of the support.

 

  1. Carefully cut a few inches of the yellow corrugated harness cover in the area shown.

 

    • Do not cut the wires inside the corrugated cover.

 

  1. Attach 2 shorting pins to the inflator harness as shown.

 

    • Make sure to pair the wires from each end of the inflator.

Blue with White

Red with Yellow

 

  • Use an insulation displacement type wire connector as a shorting pin.

 

  • Refer to the Parts Information for additional connector/shorting pin information.

 

  1. Cut off the connector end of the harness.

 

  1. Remove the 4 nuts from the module that hold the inflator in place (see Figures 39 and 40).

 

  • Use a ratchet and extension.

 

  • Remove the 4 nuts.

 

NOTE: These nuts will not be reused.

 

  1. Remove the inflator stopper.

 

  1. Push the left side of the inflator out of the module.

 

    • Twist the inflator to a position that will allow the connector and harness to fit through the opening.

 

  1. Pull the inflator completely out of the module from the right side.

 

  1. Set the old inflator in the clean working area and make sure it does not roll and fall to the floor

 

  1. Remove the old module from the FX brackets in the support.

 

IMPORTANT: This old module will not be reused.

 

IMPORTANT: In the following steps, a new module and inflator are used.

 

  1. Remove the new module from its shipping container.

 

  • New module is included in the Module Kit.

 

  1. Slide the paper tube out of the new module.

 

  1. Install the left side inflator stopper bracket) with nuts finger tight.

 

  • Make sure to use new nuts.

 

  • New nuts and new stopper bracket are included in the Module Kit.

 

  1. Attach the new module to the FX brackets in the support as shown.

 

  • Use bolts and nuts supplied with the support.

 

  • Make sure the arrow on the bag is pointing down.

 

  1. Remove the new inflator from the box.

 

  1. Place the removed (old / non-deployed) inflator in the box that the new inflator arrived in.

 

  • Follow the return instructions provided by Takata.

 

  • Return instructions provided by Takata are attached to this bulletin on page 33.

 

Install the New Inflator into the New Module

 

  1. Insert the new inflator large end first, as shown in Figure 47 from the right side.

 

  1. Align the inflator tab and then insert it through the hole in the left side inflator stopper bracket.

 

  1. Install the new right side inflator stopper bracket (shown in Figure 49) with nuts finger tight.
    • Make sure to use new nuts.  New nuts and new stopper bracket are included in the Module Kit.

 

  1. Push the new right side inflator stopper bracket against the Inflator.

 

  • Make sure the inflator is pushed all the way into its housing – no gap on the left side (see Figure 51).

 

  • Make sure there is no gap between the inflator stopper bracket and the inflator on the right side (see Figure 51).

 

  1. Torque the 4 inflator securing nuts.

 

  • Torque nuts to: 3.9 N•m (0.39 kg-m, 34 in-lb).

 

  • Torque in the order shown.

 

IMPORTANT:

  • In the next step, on the next page, you will be attaching the new harness to the new inflator.

 

  • Once an inflator connector is attached to the inflator, it cannot be disconnected.

 

  • Make sure to attach the connectors to the correct ends of the inflator (see Figure 53).

 

  1. Attach the new harness to each end of the inflator.

 

  • Remove the dust proof stickers covering the ends of the inflator.

 

  • Refer to Figures 53, 54, and 55.

 

  • Make sure the T shape at the inflator end aligns with the T shape of the connector.

 

  • Make sure harness connector is fully engaged / seated (see Figure 55).

 

  1. Remove the module from the support and set it on the clean working area.

 

  1. Reinstall the module into the vehicle in reverse order of removal.

 

  • Make sure to use the new “one time use” module mounting bolt included with the Module Kit, listed in the Parts Information.

 

  1. Re-connect both battery cables – positive cable first.

 

  1. Reset the clock and the radio settings.

 

  1. Turn the ignition from OFF to ON and observe the air bag warning light:

 

  • Light should illuminate for 7 seconds and then go out.

 

NOTE: If the Air Bag Warning light does not operate as described above there may be an issue not covered by this campaign. Refer to ASIST and the appropriate Service Manual for additional diagnostic and repair information.

 

  1. Return the removed (old / non-deployed) inflator in the box that the new inflator arrived in.

 

 

  • Follow the return instructions provided by Takata.
  • Return instructions provided by Takata are attached to this bulletin on page 33.

 

PARTS INFORMATION

DESCRIPTION PART NUMBER QUANTITY
MODULE KIT – SUB

(Includes cushion, harness, module mounting bolts, inflator securing nuts and two brackets.)

K8515-EH19E1
INFLATOR-AIR BAG ASST

(Inflator)

98561-7999E1
Shorting Pin

(Insulation Displacement Connector for 22-18 gauge wire)

NAPA item # 784566

Grainger Item # 4YT50

or equivalent available from local auto supply

2

 

NOTE:

  • Make sure to return the removed (old / non-deployed) inflator in the box that the new inflator came in.
  • Follow the return instructions provided by Takata.
  • Return instructions provided by Takata are attached to this bulletin on page 33.

 

CLAIMS INFORMATION

NOTE: Use Service COMM and the VIN to confirm the correct campaign ID number for a given vehicle. The correct number must appear on all communication and documentation of any nature dealing with this campaign.

Submit a “CM” line claim using the following claims coding:

CAMPAIGN (“CM”) I.D. DESCRIPTION OP CODE FRT
R1622Remove and replace front passenger air bag and inflatorR1622B2.7 hrs.
OR
CAMPAIGN (“CM”) I.D. DESCRIPTION OP CODE FRT
R1701Remove and replace front passenger air bag and inflatorR170162.7 hrs.
OR
CAMPAIGN (“CM”) I.D. DESCRIPTION OP CODE FRT
R1704Remove and replace front passenger air bag and inflatorR1704B2.7 hrs.
OR
CAMPAIGN (“CM”) I.D. DESCRIPTION OP CODE FRT
R1706Remove and replace front passenger air bag and inflatorR170672.7 hrs.
OR
CAMPAIGN (“CM”) I.D. DESCRIPTION OP CODE FRT
R1707Remove and replace front passenger air bag and inflatorR1707J2.7 hrs.

 

EXPENSE CODE DESCRIPTION MAXIMUM AMOUNT
041Shorting Pin

(Insulation Displacement Connector for 22-18 gauge wire)

$0.50

 

AMENDMENT HISTORY

PUBLISHED DATE REFERENCE DESCRIPTION
March 14, 2017ITB17-024Original bulletin published
June 15, 2017ITB17-024aCLAIMS INFORMATION and page 1 revised
October 3, 2017ITB17-024bChanges made throughout
January 4, 2018ITB17-024cChanges made throughout
January 15, 2020ITB17-024dCLAIMS INFORMATION revised and Campaign ID #’s added

 

Takata Document

 

Remedy Instructions and TSB

RCRIT-20V008-1257.pdf 2123.597KB


⬇ Download PDF (2.03 MB)

 

 

SaleBestseller No. 1
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission
  • [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
  • [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
  • [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
  • [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
  • [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
$169.99 −$34.04 $135.95
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 2
OBDMATE OBD2 Scanner with ABS SRS Transmission Diagnostic Tool
OBDMATE OBD2 Scanner with ABS SRS Transmission Diagnostic Tool
  • 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
  • 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
  • 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
  • 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
  • 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
$139.99
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 3
Full Systems OBD2 Scanner Car Diagnostic Tool with ABS SRS Transmission Etc
Full Systems OBD2 Scanner Car Diagnostic Tool with ABS SRS Transmission Etc
  • 【Full Systems Automotive Diagnostic】 More than checking engine, ABS and SRS, OBDMATE OM970 obd2 scanner performs comprehensive diagnostics on all electric modules. It quickly scans and clears fault codes, turns off warning lights, reads live data, and features Auto-VIN technology.
  • 【Live Datastream&4-in-1 Graph】 Easily view live sensor data such as RPM, fuel trims, ATF temperature, wheel speed sensor, battery voltage and so on. OM970 scan tool also supports 4-in-1 trend graphing. Spend just 3 minutes to check – and you'll know exactly what's going wrong, helping you avoid hundreds in dealership diagnostic fees.
  • 【One-Click I/M Readiness&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether your vehicle's emissions-related systems are operating properly. Help you get smog-check ready quickly. OM970 obd2 diagnostic tool supports all essential OBD2 functions you need. Plus, it features battery voltage test and DLC 16-PIN test.
  • 【Straightforward Menus with Easy Navigation】 All functions are easy to understand without obscure decriptions. 3.5" Large screen delivers clear readings while keeping one-hand operation. The car diagnostic tool comes with a silicone protective case and a hard-shell carrying case, ensuring long-lived durability and drop resistance.
  • 【Budget-Friendly, No Subscriptions, Free Software Updates】 Plug and play: no bluetooth pairing, monthly fees, Wi-Fi connection, or any other troublesome initial settings. OM970 obd2 scanner works out of the box with the latest software. Lifetime free upgrade.
$159.99 −$32.00 $127.99
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 4
Innova SD35 OBD2 Scanner – ABS, SRS, TPMS & Check Engine Code Reader, Live Data, All System Diagnostics, Compatible with Most Vehicles
Innova SD35 OBD2 Scanner – ABS, SRS, TPMS & Check Engine Code Reader, Live Data, All System Diagnostics, Compatible with Most Vehicles
  • OBD2 SCANNER FOR ALL SYSTEMS – The INNOVA SD35 is a tablet-based OBD2 scanner designed for advanced diagnostics. Read and clear check engine light, ABS, SRS, and TPMS codes, plus test your car battery and alternator to prevent unexpected failures. Vehicle coverage may vary. Please use Innova’s Coverage Checker to verify compatibility.
  • ALL-SYSTEM DIAGNOSTICS & LIVE DATA – Unlike basic code readers, this OBD2 scanner for all vehicles scans engine, transmission, ABS, SRS, and more. Get real-time live data, including RPM, fuel trims, temperature readings, and oxygen sensor performance.
  • OBD2 TABLET WITH USER-FRIENDLY INTERFACE – This automotive scan tool features a high-resolution display, making vehicle diagnostics faster and easier.
  • ADVANCED TPMS, OIL RESET & SERVICE FUNCTIONS – Perform TPMS sensor checks, oil light reset, and other service resets with ease This professional diagnostic tool provides comprehensive vehicle maintenance capabilities in one device.
  • WIDE VEHICLE COVERAGE (1996 & NEWER CARS & TRUCKS) – This OBD2 scanner Bluetooth tablet is compatible with Toyota, Ford, Honda, Chevrolet, Nissan, Dodge, and more. However, feature coverage may vary. Please use Innova's Coverage Checker to verify coverage.
$149.99
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 5
BLCKTEC 460T OBD2 Scanner Car Code Reader Engine ABS SRS Transmission Diagnostic Tool, 12 Reset Services, Oil/TPMS/EPB/BMS/SAS/DPF/Throttle Reset, ABS Bleeding, Battery Test, Auto VIN, Free Update
BLCKTEC 460T OBD2 Scanner Car Code Reader Engine ABS SRS Transmission Diagnostic Tool, 12 Reset Services, Oil/TPMS/EPB/BMS/SAS/DPF/Throttle Reset, ABS Bleeding, Battery Test, Auto VIN, Free Update
  • [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
  • [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
  • [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
  • [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
  • [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
$249.99 −$50.01 $199.98
Buy on Amazon Price incl. tax, excl. shipping

This product presentation was made with AAWP plugin.

BufferCopyFlipboardHacker NewsLinkedInMessengerMixPinterestPrintRedditSMSTelegramTumblrVKWhatsAppLineXing

Leave a Comment

Share to...
BufferCopyFlipboardHacker NewsLineLinkedInMessengerMixPinterestPrintRedditSMSTelegramTumblrVKWhatsAppXing