“This site contains affiliate links for which OEMDTC may be compensated” |
Classification: | Reference: | Date: |
BT21-026 | NTB21-108 | November 22, 2021 |
VOLUNTARY SAFETY RECALL CAMPAIGN
2022 FRONTIER; TRAILER TOW HARNESS AND TOW HITCH RECEIVER INSTALL
CAMPAIGN ID #: | PC855 |
APPLIED VEHICLES: | 2022 Frontier (D41) – Crew Cab Long Wheelbase ONLY |
Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility.
INTRODUCTION
Nissan is conducting this voluntary safety recall campaign, on certain specific model year 2022 Frontier crew cab long wheelbase vehicles, to install a trailer tow harness and tow hitch receiver. This service will be performed at no charge to the customer for parts or labor.
IDENTIFICATION NUMBER
Nissan has assigned identification number PC855 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
SERVICE PROCEDURE
- Install the trailer tow harness kit.
- For the trailer tow harness kit installation, refer to the accessory installation procedure Trailer Tow Harness Kit_Frontier_T99T8 9BU0A, found under the Install Instructions tab in ASIST.
- Install the tow hitch receiver.
- For the tow hitch receiver installation, refer to the accessory installation procedure Tow Hitch Receiver_Frontier_T99T5 9BU0B, found under the Install Instructions tab in ASIST.
NOTE: In the event the vehicle currently has an aftermarket tow hitch installed, Email a clear picture of the tow hitch assembly that is on the vehicle to FQA using the information below.
a. Email photos to nnafqasupport@nissan-usa.com
b. Make sure to include the following information in the Email:
-
- Email Subject Line: PC855 Frontier Tow Hitch
-
- Dealer Name
-
- Dealer Code
-
- Dealer Address
-
- VIN
-
- Contact Person Name
-
- Contact Person Phone Number
IMPORTANT: The Email file size cannot exceed 10Mb.
FQA will follow-up with the Dealer contact person within two (2) business days with further instructions.
PARTS INFORMATION
DESCRIPTION | PART NUMBER | QUANTITY |
Tow Harness Kit | T99T8-9BU0A | 1 |
Tow Hitch Receiver | T99T5-9BU0B | 1 |
CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
CAMPAIGN (“CM”) ID | DESCRIPTION | OP CODE | FRT |
PC855 | Install Trailer Tow Harness and Tow Hitch Receiver | PC8550 | 1.3 |
AMENDMENT HISTORY
PUBLISHED DATE | REFERENCE | DESCRIPTION |
November 22, 2021 | NTB21-108 | Original bulletin published |
Recall PC855 Missing Tow Hitch Compromises Fuel Tank – 2022 Nissan Frontier
Recall PC855 Missing Tow Hitch Compromises Fuel Tank – 2022 Nissan Frontier
Remedy Instructions and TSB
RCRIT-21V917-5000.pdf 747.715KB
- DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight, 500 lbs. tongue weight, 8,000 lbs. weight distribution capacity and 800 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
- RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Nissan Frontier and Suzuki Equator
- Fitment: Compatible with 2008-2020 Rogue Models; 2014-2015 Rogue Select (Will Not Fit Krom Edition Models ). Custom built according to make & model year of your vehicle. With rearward-facing Opening that accepts removable ball mounts, hitch bike racks, cargo carriers, or other mounted accessories.
- Surface Protection: Black powder coated finish offer long lasting corrosion resistance for dust, chipping and extreme weather condition.
- Heavy Duty Protection: Solid all-welded design & construction for maximum strength & safety. Able to withstand heavy duty towing purposes to it's specified capacities.
- Feature: Color: Black; Finish:Powder Coated; Hitch Class: Class 3; Receiver Size: 2" Receiver Tube; Weight Carrying Capacity:3500 lbs , Tongue Weight: 525 lbs.
- Easy Installation: Easy to install. Professional installation is always recommended.
- Designed to complement today's trucks, vans and sport utility vehicles, attach directly to the frame with no drilling or welding necessary
- 2 inch square receiver tube opening and solid all-welded construction for maximum strength and durability
- The A-Coat base with black powder coat finish is resistant to adverse weather conditions and corrosion, ensures an attractive appearance for years to come
- Computer-Aided design and fatigue stress tested to ensure perfect fit and top towing performance, backed by Draw-Tite's Nationwide Limited Lifetime Warranty
- Rated at 900/6,000 lbs. (TW/GTW) weight carrying (WC) and 900/6,000 lbs. (TW/GTW) weight distributing (WD), always consult your vehicle's owner's manual for actual weight capacities
- FITMENT: Compatible with 2005-2015 Nissan Xterra. Gross trailer weight: 4,000 lbs; Tongue weight: 400 lbs; Weight distribution capacity: 6,000 lbs; Weight distribution tongue weight: 600 lbs.
- OUTSTANDING PERFORMANCE: Made of automotive grade sturdy steel, more impact resistant and less prone to damage. Has better strength and rigidity to withstand heavy-duty towing.
- UPGRADED APPEARANCE: The rust-resistant black powder-coated finish helps update the look of your vehicle, adding a sporty style to your vehicle. It is also resistant to UV rays and can be used outdoors for long periods of time without fading.
- ENHANCED TRANSPORTATION: The receiver is equipped with a 2-inch receiver for towing a variety of accessories and vehicles of different sizes, such as campers, RVs, ball mounts, racks, bike racks, tow hooks and more. A variety of towing options are realized, which effectively improves the convenience of transportation.
- PACKAGE & INSTALLATION: You will receive 1 x black trailer receiver, installation accessories (as picture) and instructions. Screw fixing, easy and fast, solid and safe.
- ▶️ Compatible with 05-20 Frontier, 09-12 Equator
- ▶️ 2" Receiver / class-3 Hitch with gloss black powder coated finish. Made with heavy duty all-welded design and construction for maximum strength and safety, can provide a long time for you
- ▶️ 5,000 lbs. gross trailer weight and 500 lbs. tongue weight rated, allowing for a wide variety of towing options; Precision welds for strength and fit
- ▶️ Hitch engineered to tuck into vehicle body for cleaner look; See-through receiver for easy maintenance
- ▶️ Custom-designed with your make and model in mind, bolt right to your factory mounting points, guaranteed for a quick and easy installation. May require trimming of bumper fascia for clearance
- Application: Compatible With 2009-2014 Nissan Murano All Models
- Trailer Hitch ( Pin, Clip, Ballmount & Wirings Are Not Included )
- Hitch Class: Class 3, Receiver Size: 2" Receiver Tube
- Towing Specifications: Weight Carrying Capacity - 4000 lbs, Tongue Weight - 400 lbs, Weight Distribution - N/A, Weight Distribution Tongue Weight - N/A
- Black
- DEPENDABLE STRENGTH. This trailer hitch is rated for 4,000 lbs. gross trailer weight, 400 lbs. tongue weight, 6,000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
- RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Nissan Xterra
- Max-Frame receivers are designed for trucks, vans and sport utility vehicles. Applications-2005 - 2023:Nissan, Frontier, 2009 - 2012:Suzuki, Equator
- 2" square receiver tube opening
- Rated up to 5000 pounds (GTW) weight carrying (WC), rated up to 8000 pounds (GTW) weight distributing (WD)
- All-Frame attachment, solid all-welded construction, with a-coat base w/ black powder coat finish
- Custom built to manufacturer and model year ensures perfect fit and top towing performance. Clean Appearance That Attaches To The Vehicle's Frame And/Or Bumper
- DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
- RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Nissan Murano
- COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Nissan Rogue.
- DEPENDABLE STRENGTH. This trailer hitch is rated for 3, 500 lbs. gross trailer weight and 525 lbs. tongue weight (limited to lowest-rated towing component).
- VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
- RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
- EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights.
Last update on 2024-04-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
1/4 Classification: Reference: Date: BT21-026 NTB21-108 November 22, 2021 VOLUNTARY SAFETY RECALL CAMPAIGN 2022 FRONTIER; TRAILER TOW HARNESS AND TOW HITCH RECEIVER INSTALL CAMPAIGN ID #: PC855 APPLIED VEHICLES: 2022 Frontier (D41) – Crew Cab Long Wheelbase ONLY Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility. INTRODUCTION Nissan is conducting this voluntary safety recall campaign, on certain specific model year 2022 Frontier crew cab long wheelbase vehicles, to install a trailer tow harness and tow hitch receiver. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC855 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed. Nissan Bulletins are intended for use by qualified technicians, not ‘do-it-yourselfers’. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 2/4 NTB21-108 SERVICE PROCEDURE 1. Install the trailer tow harness kit. For the trailer tow harness kit installation, refer to the accessory installation procedure Trailer Tow Harness Kit_Frontier_T99T8 9BU0A, found under the Acc. Install Instructions tab in ASIST. Figure 1 Trailer Tow Harness Kit_Frontier_T99T8 9BU0A 3/4 NTB21-108 2. Install the tow hitch receiver. For the tow hitch receiver installation, refer to the accessory installation procedure Tow Hitch Receiver_Frontier_T99T5 9BU0B, found under the Acc. Install Instructions tab in ASIST. Figure 2 Tow Hitch Receiver_Frontier_T99T5 9BU0B 4/4 NTB21-108 NOTE: In the event the vehicle currently has an aftermarket tow hitch installed, Email a clear picture of the tow hitch assembly that is on the vehicle to FQA using the information below. a. Email photos to nnafqasupport@nissan-usa.com b. Make sure to include the following information in the Email: o Email Subject Line: PC855 Frontier Tow Hitch o Dealer Name o Dealer Code o Dealer Address o VIN o Contact Person Name o Contact Person Phone Number IMPORTANT: The Email file size cannot exceed 10Mb. FQA will follow-up with the Dealer contact person within two (2) business days with further instructions. PARTS INFORMATION DESCRIPTION PART NUMBER QUANTITY Tow Harness Kit T99T8-9BU0A 1 Tow Hitch Receiver T99T5-9BU0B 1 CLAIMS INFORMATION Submit a “CM” line claim using the following claims coding: CAMPAIGN (“CM”) ID DESCRIPTION OP CODE FRT PC855 Install Trailer Tow Harness and Tow Hitch Receiver PC8550 1.3 AMENDMENT HISTORY PUBLISHED DATE REFERENCE DESCRIPTION November 22, 2021 NTB21-108 Original bulletin published
**************************************************************************************************************
SEOCONTENT-END