Voluntary Safety and Emissions Recall Campaign PC887 – Fuel Tank Replacement – 2022 Nissan Rogue

“This site contains affiliate links for which OEMDTC may be compensated”

April 14, 2022 NHTSA CAMPAIGN NUMBER: 22V259000

Improperly Manufactured Fuel Tank

Road debris may puncture the thin fuel tank wall, causing a gas leak and increasing the risk of a fire. In addition, the fuel tank may not perform as expected during a crash, increasing the risk of injury.

 

NHTSA Campaign Number: 22V259

Manufacturer Nissan North America, Inc.

Components FUEL SYSTEM, GASOLINE

Potential Number of Units Affected 52

 

Summary

Nissan North America, Inc. (Nissan) is recalling certain 2022 Rogue vehicles. Due to a manufacturing error, an area on the bottom wall of the fuel tank may be too thin.

 

Remedy

Dealers will replace the fuel tank assembly and install a new lock ring, gasket, and o-ring seal, free of charge. Owner notification letters were mailed May 19, 2022. Owners may contact Nissan customer service at 1-800-867-7669. Nissan’s number for this recall is PC887.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Nissan has a Recall

 


Fuel Tank Replacement
Voluntary Safety and Emissions Recall Campaign

Reference: PC887
Date: September 16, 2022

 

REVISED September 16, 2022
Please discard earlier versions of this bulletin.

The announcement from April 19, 2022 has been revised to include the following:

  • The following parts are being placed on restriction and can be ordered via DBS beginning September 15, 2022.
    • 17202-6RR0A – Tank Assy-Fuel
    • 17342-6RR0A – Packing-Fuel Gauge
    • 17343-6RR0A – Plate-Lock, Fuel Gauge
    • 20692-8H30A – Gasket-Exhaust

 

Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale  In Effect
MY2022 Rogue (T33) 52 1 April 19, 2022 YES

 

***** Campaign Summary ***** 

Nissan has reclassified the previously announced quality action (PC872) for new vehicle inventory as a Voluntary Safety and Emissions Recall Campaign on specific 2022 Rogue (T33) vehicles identified in Service Comm to replace the fuel tank.

During manufacturing at the supplier, an incorrect molding parameter change may have resulted in a thin wall area on the bottom of the fuel tank. This condition could result in a potential fuel leak if a road debris puncture occurs, or may affect tank performance in case of a crash. In addition, the fuel tank may not meet certain FMVSS 301 regulations because of this condition.

 

***** Release Schedule ***** 

Parts

Parts are on restriction and may be ordered via DBS.

17202-6RR0A – Tank Assy-Fuel

17342-6RR0A –  Packing-Fuel Gauge

17343-6RR0A – Plate-Lock, Fuel Gauge

20692-8H30A – Gasket-Exhaust

 

Special Tool

Additional tools are available via TechMate @ 1-800-662-2001 or www.nissantechmate.com.

 

Repair

  • NTB22-031 Owner Notification Nissan will begin sending notifications to owners of all potentially affected vehicles in May 2022, via U.S. Mail.

 


Frequently Asked Questions (FAQ): 

 

Is this a Stop Sale?

Yes.

 

What is the reason for this safety recall?

During manufacturing at the supplier, an incorrect molding parameter change may have resulted in a thin wall area on the bottom of the fuel tank.

 

What is the possible effect of the condition?

This condition if present, could result in a potential fuel leak if a road debris puncture occurs, or may affect tank performance in case of a crash, increasing the risk of injury. In addition, the fuel tank may not meet certain FMVSS 301 regulations because of this condition.

 

What will be the corrective action?

Dealers will replace the fuel tank.

 

How long will the corrective action take?

The remedy should take approximately two (2) hours to complete. The dealer may require the vehicle for a longer period of time based upon the dealer’s work schedule.

 

When will vehicle owners be notified?

Nissan will begin sending notifications to owners of all potentially affected vehicles in May 2022, via U.S. Mail.

 

Is my vehicle safe to drive?

If your vehicle is subject to this campaign, you will receive an Owner Notification letter from Nissan, which will provide instructions on how to remedy your vehicle. Affected owners are encouraged to have their vehicles remedied as soon as possible upon notification.

 

Is there anything owners can do to mitigate this condition?

No.

 

Is there any charge for this repair?

No, the remedy will be performed for the customer free of charge for parts and labor.

 

Are parts readily available?

 Yes.

 

Is a California Vehicle Emission Recall Proof of Correction needed?

 Yes. California dealer technicians are required to complete and attach an Emission Recall Campaign Completion (ERCC) label to the underside of the vehicle hood and provide the owner with a Proof of Correction certificate. Refer to NTB22-031 Attention California Dealers.

 

Will I have to take my vehicle back to the selling dealer to have the service performed?

No, any authorized Nissan dealer is able to perform the recall campaign.

 

Will a rental vehicle be provided while the dealer is servicing the vehicle?

Please consult your dealer for alternate transportation availability while your vehicle is being serviced. Rental is available upon customer request, while parts are on order.

EXPENSE CODE DESCRIPTION AMOUNT
502 Rental Expense $156 (Max)
Contact the Warranty claims call center 1-800-258-7008 Option 7, if additional expense is required. Please refer to the Goodwill Rental Guidelines in the APRM for detailed information regarding application of rental reimbursement.

 

I have lost confidence in the vehicle. Will Nissan replace or repurchase the vehicle?

The remedy will fully correct this condition. As the condition will be corrected, there is no basis for repurchasing or replacing your vehicle.

 

What model year vehicles are involved?

Certain 2022 Rogue vehicles manufactured from February 4, 2022 to February 24, 2022 at the Smyrna, TN plant are affected.

 


Chronology :

March 2, 2022 – A production operator noticed a potential anomaly on a fuel tank during the assembly process.
A subsequent inspection of the tank revealed a specific area had low wall thickness. Nissan initiated containment measures and immediately began an investigation together with the Tier 1 supplier (YAPP).

March 2022 – An investigation of the production records revealed manual changes to a blow molding parameter had resulted in a low wall thickness in certain areas of the tank. The supplier implemented a production countermeasure to prevent the issue from reoccurring.

Nissan conducted an audit and determined that the supplier had shipped seventy (70) potentially affected tanks to the Smyrna plant. Upon further examination, six (6) of these fuel tanks contained the subject condition.

April 2022 – Concurrently, Nissan performed a safety assessment to determine whether the thin wall condition affected the performance of the fuel tanks. The assessment determined the condition could result in a potential fuel leak if a road debris puncture occurs, or may affect tank performance in case of a crash.

April 7, 2022 – Nissan decided to recall all potentially affected vehicles to replace the fuel tank assembly.

 


VOLUNTARY SAFETY AND EMISSIONS RECALL CAMPAIGN
2022 ROGUE; FUEL TANK REPLACEMENT

NTB22-031

Voluntary Safety And Emissions Recall Campaign 2022 Nissan Rogue; Fuel Tank Replacement

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
NISSAN ROGUE 2022

 


10 Associated Documents

Remedy Instructions and TSB

RCRIT-22V259-1424.pdf 293.375KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [286.50 KB]

 


Recall Acknowledgement Letter

RCAK-22V259-8916.pdf 690.666KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [674.48 KB]

 


April 14, 2022 DEFECT INFORMATION REPORT

RMISC-22V259-6755.pdf 64.222KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [62.72 KB]

 


Defect Notice 573 Report

RCLRPT-22V259-4192.PDF 214.06KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.04 KB]

 


Manufacturer Notices(to Dealers,etc) – Nissan PC887 2022 Rogue Fuel Tank – VSRC_VERC – Dealer Announcement

RCMN-22V259-0152.pdf 144.601KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [141.21 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V259-4908.pdf 85.732KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [83.72 KB]

 


Manufacturer Notices(to Dealers,etc) – NISSAN CAMPAIGN BULLETIN Fuel Tank Replacement Voluntary Safety and Emissions Recall Campaign Reference: PC887 Date: September 16, 2022

RCMN-22V259-0624.pdf 146.514KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [143.08 KB]

 


Recall Quarterly Report #1, 2022-2

RCLQRT-22V259-4957.PDF 211.221KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Recall Quarterly Report #2, 2022-3

RCLQRT-22V259-6094.PDF 211.221KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Recall Quarterly Report #3, 2022-4

RCLQRT-22V259-1986.PDF 211.305KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.35 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V259&docType=RCL

 


 

Bestseller No. 1
CRC GDI IVD Intake Valve & Turbo Cleaner
  • Proven to clean intake valves on GDI engines and turbo systems
  • Easily installed through the air intake system
  • Highest concentration PEA (Polyether Amine) detergency available
  • Proven to remove up to 46% of GDI Intake Valve deposits in 1 hour
  • 150X more concentrated than fuel additives
Bestseller No. 2
Gumout 540028 Foaming Intake Valve & Turbo Cleaner, 11 oz
  • Deep Cleans GDI (Gasoline Direct Injection) / PFI (Port Fuel Injection) Intake Valves, As Well As, The Throttle Body, Intake Ports, Fuel Injectors and Combustion Chambers
  • Helps Restore Fuel Economy and Maximize Horse Power
  • Removing Carbon and Fuel Deposits From Gasoline Engines Intake Valves, Intake Ports and Turbos Is Essential to Ensuring Optimal Vehicle Performance.
  • Made with Carbon Clear and Trade, the Most Advanced P.E.A. Cleaning Agent Available
  • Strong Enough to Cut Through Thick Carbon Deposits, Even at Extreme Engine Temperatures
Bestseller No. 3
Bestseller No. 4
Bestseller No. 5
Bestseller No. 6
Berryman Products 2611 Intake Valve and Combustion Chamber Cleaner, 16-Ounce Aerosol
  • Formulated for Use In All Fuel-Injected Gasoline Engines, Including GDI
  • Contains Polyetheramine (“PEA”) to Dissolve Carbon Buildup in Combustion Chambers
  • Cleans ALL Types of Intake Valves, Including Those Found in PFI, TBI, and GDI Engines
  • Safe On Catalytic Converters and Oxygen Sensors
  • Not For Use In Diesel Engines
Bestseller No. 7
FIRSTINFO A1601 4 In 1 Intake Valve Cleaner Combustion Chamber Cleaner/Vacuum System Cleaner/Vacuum System Pressure Tester Kit
  • 【 Maintain Engine Performance 】 Perfect for air intake system, combustion chamber, EGR Valves, intake valves and oxygen sensors. Easy operation for making the fuel injectors spray smoothly and properly.
  • 【 Easy to Use 】 Simply fill with air intake cleaning liquids and connect the vacuum hose of vehicle vacuum system. Reduce carbon deposits easily.
  • 【 Multiple Applications 】 Use to clean the intake valve, combustion chamber, vacuum system and test the vacuum system pressure. Provides more thorough cleaning than other methods. Effectively remove engine carbon deposits and increase gas mileage performance.
  • 【 Equipped with Negative Pressure Gauge 】 The liquid-filled gauge for accurate vacuum pressure reading and monitoring chemical flow.
  • 【 Gasoline Engine / Petrol Cars Use 】 Used for gasoline engine injection and petrol cars. "NOT" for diesel injector. And solution liquid is "NOT" included.
Bestseller No. 8
CRC Industries, Inc. Intake Valve Cleaner (11 oz) Bundled with Latex Gloves (3 Items)
  • Bundle comes with:
  • 2 - CRC 05319 Industries Intake Valve Cleaner (11 oz)
  • 2 Pairs (4 Gloves) of CLC2316L Latex Gloves - Large
  • Fit type: Universal
Bestseller No. 9
Smilyeez BG GDI Air Intake & Valve Cleaner PN 260 With Pocket Screwdriver (1)
  • Restores MPG
  • Restores engine performance
  • Restores power
  • Reduces harmful emissions
  • Requires pressurized tool
SaleBestseller No. 10
ATP AT-100 Intake Blast Complete Intake System Cleaner, 7.5 oz, 1 Pack
  • Cleans intake system by dissolving carbon and oil deposits
  • Helps eliminate rough idle, hard starting, loss of power and pinging
  • Smoke free, catalytic converter and O2 sensor safe formula
  • Recommended for fuel injected engines, critical for direct injected engines
  • Easy to use aerosol application, Includes vacuum Hose and multi-adapter fitting

Last update on 2024-04-03 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...